DOWNLOAD Sony KLV-26S200A / KLV-32S200A / KLV-40S200A / KLV-46S200A (serv.man3) Service Manual ↓ Size: 13.8 MB | Pages: 80 in PDF or view online for FREE

– 5 –

* Light is green when the TV set is on
* Functions as failure indicator
* Blinks green in aging mode

TIMER LED

Red LED

Lights when timer is set

PIC OFF LED

Green LED

Lights when power saving setting is set to 
picture off (See Instruction Manual)

POWER LED

Red/Green LED

– 6 –

STATUS

POWER LED

TIMER LED/

PICTURE OFF LED

STANDBY 

LED

REMARKS

Power Off

Off

Off

Off

Power off using the power switch or 
remote control.  NOTE: Standby 
state does not exist in this model; 
however, the microcomputer does 
enter into sleep mode.

Power Off

Lights Green

Off

Off

Microcomputer working normally.

Failure

Blinks Red

Off

Off

Failure causes are classified by the 
number of time the red light blinks.

Aging

Blinks Green

Off

Off

Aging mode is classified by a blinking
green light.

Pic

PC STANDBY

PC STANDBY/
TIMER ON

ture Off

Lights Green

Lights Green

Off

Off

Off

No display (black screen).

Lights Green

Lights Orange

Off

When SLEEP TIMER is set during 
power on.

Lights Green

Lights Green

When SLEEP TIMER is set in 
Picture Off mode.

Off

Lights Orange

Off

When ON TIMER is set and power is 
off.

Lights Green

Lights Orange

Off

When ON TIMER is set and power is 
on.

Lights

Off

 Green

Lights

Off

 Green

Lights Red

Off

Lights Orange

Lights Red

When ON TIMER is set in Picture Off
mode.

SLEEP TIMER

ON TIMER

The units in this manual contain a self-diagnostic function. If an error occurs, the POWER LED will automatically begin to flash. The
number of times the LED flashes translates to a probable source of the problem. A definition of the POWER LED flash indicators is
listed in the instruction manual for the user’s knowledge and reference. If an error symptom is difficult to reproduced use the
Remote Commander to display the record that is stored at the internal NVM to specify the cause of the failure.

Diagnostic Test  Indicators
When an error occurs, the POWER LED will flash a set number of times to indicate the possible cause of the problem. If there is
more than one error, the LED will identify the first of the problem areas. If the errors occur simultaneously, the one that corresponds
to the fewest flashes is identified first. Results for all of the following diagnostic items are displayed on screen. No error has occurred
if the screen displays a “0”.

1

Supply Voltage Trouble Panel 5V UNReg (10.5V)

2

DE5V Voltage Trouble FE5V (DCALERT2)

3

Voltage Trouble D3.3V/D2.5V/D1.8V. (DCALERT1)

4

Backlight Trouble

5

Main Supply Voltage Trouble (17.5V.DET)

6

Speaker Applied Voltage Trouble

7

Monitor an Increase in Inside-Temperature (esp. on the panel side)

8

Trident IC Trouble

– 7 –

Two Screws, 3 x 12 Type2 IT-3

3

 Lift to remove Rear Cover

4

Ten Screws (KLV-26S200A)
Twelve Screws (KLV-32S200A/40S200A)
Eighteen Screws (KLV-46S200A)
+BVTP2 4 X 16 1

Two Screws

+PSW M4 X 16 (KLV-26S200A)

+PSW M6 X 16 (Except KLV-26S200A)

2

– 8 –

1 Three screws
   (+PSW M4X16)

1 Three screws
   (+PSW M4X16)

4 Vesa assy bracket (L)

4 Vesa assy bracket (L)

6 Vesa assy bracket (R)

6 Vesa assy bracket (R)

2 Stand assy

3 One screw
   (+PSW M4X16)

5 One screw
   (+PSW M4X16)

5 Two screws
   (+PSW M5X16)

3 Two screws
   (+PSW M5X16)

2 Stand assy

KLV-26S200A/32S200A

KLV-40S200A/46S200A