Sony KLV-26HG2 (serv.man3) Service Manual ▷ View online
KLV-26HG2
KLV-26HG2
10
1-7. B BOARD REMOVAL
1-8. H1 AND MSX BOARD REMOVAL
B board
Four screws
(+BVTT 3x6)
Two screws
(+BVTT 3x6)
DVI bracket
MSX board
H1 board
Two screws
(+BVTT 3x6)
Two screws
(+BVTP 3x8)
Two screws
(+BVTP 3x8)
Screw
(+BVTP 3x10)
3
1
2
5
4
4
3
1
2
6
KLV-26HG2
KLV-26HG2
11
1-9. H2 BOARD REMOVAL
1-10. H3 BOARD REMOVAL
H2 board
Four screws
(+BVTP 3x8)
Two screws
(+BVTP 3x8)
H3 board
Two screws
(+BVWHTP 3x12)
1
2
1
3
2
KLV-26HG2
KLV-26HG2
12
SECTION 2: ADJUSTMENTS
2-1. SETTING THE SERVICE ADJUSTMENT
MODE
1. Standby mode (Power off).
2. Press the following buttons on the remote commander within a
second of each other:
Display
Channel 5
Sound Volumne +
Power
2-2. WHITE BALANCE ADJUSTMENTS
1. Input a grayscale pattern.
2. Enter into Service Mode.
3. Select ADJ ITEM from the Service Mode menu.
4. Press the MENU button on the remote to display the Customer Menu.
5. From the Mode list select VIVID.
6. From the Mode list select: Dynamic Picture = Off
7. From the Mode list select: Color Temp = Cool
8. Press the MENU button on the remote to clear the customer menu.
9. From the ADJ ITEM list do the following:
a. Adjust
R DRIVE, G DRIVE, and B DRIVE for correct white balance in
high lighted areas.
b. Adjust
R BKG, G BKG, and B BKG for correct white balance in low
lighted areas.
Note: Adjusments automatically save.
10. Repeat steps 4 through 9 for Neutral and Warm mode.
11. When changes are complete, turn the set off then back on.
KLV-26HG2
13
KLV-26HG2
3-1. CIRCUIT BOARDS LOCATION
SECTION 3: DIAGRAMS
TU board
U1 board
H1 board
MSX board
A1 board
H2 board
UD board
B board
MS board
H3 board
G1 board
MSB board
Click on the first or last page to see other KLV-26HG2 (serv.man3) service manuals if exist.