DOWNLOAD Sony KLV-20S400A / KLV-32S400A / KLV-37S400A / KLV-40S400A Service Manual ↓ Size: 4.9 MB | Pages: 45 in PDF or view online for FREE

China Model

RM-SA014/SA014W

KLV-32S400A/37S400A/

40S400A

KLV-20S400A

KLV-20/32/37/40S400A (CH)     2

Panel System

TV System

D/K, I, B/G, M

1

(RGB)

i

94 cm

(37 inches)

80  cm

(32 inches)

Mass**

22.0

21.0

19.0

18.0

Humidity

Air Pressure

Colour System

Channel Coverage

Sound Output

Antenna

1, 2, 3

1, 2, 3

1, 2

HDMI IN 1, 2, 3

PC IN 

Power Requirements

Viewing Screen Size** (diagonal)

Display Resolution

Power Consumption

Standby Power Consumption*

Dimensions**
(w 

× h × d)

with stand (mm)

without stand (mm)

with stand (kg)

without stand (kg)

Environment Temperature

LCD (Liquid Crystal Display) Panel

PAL, PAL60, SECAM, NTSC4.43, NTSC3.58

D/K:  VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ CATV: S01 to S03, S1 to S41,
 

Z1 to Z39

I:       UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
B/G:  VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41
M:     VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84 

8.5 W + 8.5 W (as distortion of 7%)

4.25 W + 4.25 W 
(as distortion of 7%)

75 ohm external terminal for VHF/UHF

S video input (4-pin mini DIN)

Video input

Audio input: 500 mVrms, 47 kilohms

Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V sync negative/P

B

/C

B

: 0.7 Vp-p, 75 ohms/P

R

/C

R

: 0.7 Vp-p, 75 ohms

Video: 1080/24p, 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
       Analogue audio input (minijack): 500 mVrms, 47 kilohms (HDMI IN 3 only)

Video output

Audio output

PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
       PC audio input (minijack)

Headphones jack

220 V AC, 50 Hz

102 cm

(40 inches) 

1,920 pixels (horizontal) 

×

1,080 lines (vertical)   

1,366 pixels (horizontal) 

×

 768 lines (vertical)

156 W

180 W

224 W

Less than 0.6 W

997 

×

 691 

×

 279

997 

×

 644 

×

 110

931 

×

 609 

×

 110

931 

×

 656  

×

 279

809 

×

 584 

×

 242

809 

×

 542 

×

 99

16.0

14.0

51  cm

(20 inches)

60 W

529 

×

 396 

×

 174

529 

×

 393 

×

 99

9.0

8.0

* Specified standby power is reached after the TV finishes necessary internal processes.
** Dimensions and mass are approximate values.

5ºC – 35ºC 

20% – 80% 

86 kPa – 106 kPa 

KLV-20/32/37/40S400A (CH)     3

Design and specifications are subject to change without notice.

KLV-20/32/37/40S400A (CH)     4

These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.

An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.

!

Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.

It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.

NOTE: Do  not modify the original design without obtaining

written permission from the manufacturer or you will
void the original parts and labor guarantee.

When repairing the LCD panel, be sure you are grounded by
using a wrist band.

When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of

electric shock.

2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of

high humidity for an extended period of time.

4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within

the module.

6) Disconnect the AC power when replacing the backlight (CCFL)

or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)

7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter

circuit. Damaging the wires may cause a short.

9) Protect the panel from ESD to avoid damaging the electronic

circuit (C-MOS).