Sony KF-42E200A / KF-42E201A / KF-50E200A / KF-50E201A Service Manual ▷ View online
KF-42E200A/42E201A/50E200A/50E201A
KF-42E200A/42E201A/50E200A/50E201A
29
x Secure Ring Terminal of 1-910-016-90 to G-Block as shown above.
x Install Faston Terminal to Antenna Switch.
Note: Orientation of ring terminal should be towards the top of the set.
1-910-016-90
OPTICAL BLOCK ASSEMBLY LIGHTNING GROUND POSITION
KF-42E200A/42E201A/50E200A/50E201A
KF-42E200A/42E201A/50E200A/50E201A
30
See above for Connector Assy Routing of CN110 [HB]
See above for Connector Assy Routing of CN100 [HA]
SPEAKER GRILL WIRE DRESSING
KF-42E200A/42E201A/50E200A/50E201A
KF-42E200A/42E201A/50E200A/50E201A
31
SPEAKER GRILL WIRE DRESSING (CONTINUED)
Dress HA/HB Connector Assy to Wire holder as shown above.
When routing HA/HB Connector Assy through Wire Holder
“RED” tape should be approximately in the position shown
above.
“RED” tape should be approximately in the position shown
above.
KF-42E200A/42E201A/50E200A/50E201A
KF-42E200A/42E201A/50E200A/50E201A
32
a
Dress Positive Tab of Speaker wire around speaker bracket
and then Himelon Tape should be installed to secure the wire
as shown.
and then Himelon Tape should be installed to secure the wire
as shown.
Wire Should be pulled so that there is no excess wire.
THIS IS VERY IMPORTANT TO AVOID NOISE DUE TO
SPEAKER VIBRATION
SPEAKER VIBRATION
Tape should wrap around bracket as shown to the right and
securely hold the speaker wire so that it does not move once
the tape is applied.
securely hold the speaker wire so that it does not move once
the tape is applied.
SPEAKER WIRE DRESSING
Click on the first or last page to see other KF-42E200A / KF-42E201A / KF-50E200A / KF-50E201A service manuals if exist.