Sony KE-P42MRX1 / KE-P50MRX1 Service Manual ▷ View online
–
9
–
–
MRX1
RM-Y1012
Overview of the Media Receiver
Power on/
standby
indicator
standby
indicator
Timer indicator
“Memory Stick”
lamp
lamp
TV mode
button
button
*
If the “Logo illuminated”
in the “Features” menu is
set to “Yes” (see page 29),
all these indicators will be
illuminated and each
indicator will be only
underlined according to
your selection. If “Logo
illuminated” is set to
“No”, any of these
indicators will be
illuminated.
set to “Yes” (see page 29),
all these indicators will be
illuminated and each
indicator will be only
underlined according to
your selection. If “Logo
illuminated” is set to
“No”, any of these
indicators will be
illuminated.
Selecting Input
Source button
Source button
"Memory Stick"
access button
access button
Volume control
button (+/-)
button (+/-)
Programme Up
or Down button
(selects TV
channels)
or Down button
(selects TV
channels)
Headphones
jack
jack
PC Input C
connectors (video
and audio)
connectors (video
and audio)
Video Input
jack
jack
S Video
Input jack
Input jack
Audio Input
jacks
jacks
“Memory
Stick”
recording
indicator
Stick”
recording
indicator
TV indicator
Input
indicator (changes
according to the selected
input (see page 52).
indicator (changes
according to the selected
input (see page 52).
PC indicator
Menu button
OK
button
button
"Memory Stick"
slot
slot
*
Auto Start Up button
(starts the auto start up
sequence, see page 19)
(starts the auto start up
sequence, see page 19)
/
/
/
buttons
Press on the mark
.
q
On/off
switch
switch
Connecting the Display Unit to the Media Receiver
Unit
Unit
2
Connect the supplied mains lead to the display unit.
3
Only for KE-P42MRX1, KE-P50MRX1 and KE-P61MRX1:
To unplug the mains lead pull down the mains plug holder by pushing in both sides of the holder, then pull
out the plug.
out the plug.
4
Install the display unit using the specified wall-mount bracket or stand.
Before installing the display unit, check the installation instructions of your wall-mount bracket or stand.
• Use the supplied display interface cable.
• Use the supplied mains lead for the display unit (Type C-4, Type BF or Type C-5, see page 11).
• Use the supplied mains lead for the display unit (Type C-4, Type BF or Type C-5, see page 11).
1
Connect the supplied interface cable to the display unit and to the media receiver unit.
Location of the mains lead
connection may be separated from
the interface connections
depending on the model.
connection may be separated from
the interface connections
depending on the model.
Do not connect to
the mains before
all connections
are completed.
the mains before
all connections
are completed.
Location of the interface
connections may differ
depending on the model.
connections may differ
depending on the model.
Clip on the AC
IN jack until you
hear clicking.
IN jack until you
hear clicking.
Attach the mains plug holder
(supplied) to the mains lead.
(supplied) to the mains lead.
–
10
–
MRX1
RM-Y1012
Connecting the Aerial and VCR
• Use the supplied mains lead for the media receiver unit (Type C-4, Type BF or Type C-5, see page 11).
• Use the supplied coaxial cable for aerial connection.
• Use the supplied coaxial cable for aerial connection.
For more details regarding VCR connection, refer to
“Connecting Optional Equipment to the TV” on
page 50.
“Connecting Optional Equipment to the TV” on
page 50.
Connecting an aerial
Connecting a VCR with an aerial
3/
OUT
IN
VCR
Do not connect
to the mains
before all
connections
are complete.
to the mains
before all
connections
are complete.
Do not connect
to the mains
before all
connections
are complete.
to the mains
before all
connections
are complete.
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose
the language of the menu screen 2) Choose the country in which you are going to operate the TV, 3) set the
clock 4) check how to connect optional equipment to your TV, 5) search and store all available channels (TV
Broadcast) and 6) change the order in which the channels (TV Broadcast) appear on the screen.
clock 4) check how to connect optional equipment to your TV, 5) search and store all available channels (TV
Broadcast) and 6) change the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate
option in the
(Set Up menu) or by pressing the Auto Start Up button
on the media receiver.
1
Connect the display unit and the media receiver unit to
the mains socket (220-240V AC, 50/60Hz).
2
The first time that the TV set is connected, it is usually turned on.
If the TV is off, press the
on/off button on the TV set to turn on
the TV.
The first time you switch on the TV, a Language menu appears
automatically on the TV screen.
3
Press the
V
,
v
,
B
or
b
buttons on the remote control to select your
language, then press the OK button to confirm your selection. From
now on all the menus will appear in your chosen language.
now on all the menus will appear in your chosen language.
4
The Country menu appears automatically. Press the
v
or
V
button
to select the country in which you are using the TV. Press the OK
button to confirm your selection.
button to confirm your selection.
• If the country in which you want to use the TV set does not
appear in the list, select “Off” instead of a country.
• To avoid wrong teletext characters for cyrillic languages we
recommend selecting Russia if your own country does not
appear in the list.
appear in the list.
5
The Clock Set menu appears on the TV screen to set the current date
and time.
Press the
b
button repeatedly to select each item in turn (Day, Month,
Year, Hour and Minutes) and set each item by pressing
v
or
V
. Finally
press OK to store it.
continued...
Country
Select country
Off
Ireland
Nederland
België/Belgique
Luxembourg
France
Italia
Schweiz/Suisse/Svizzera
Clock Set
0 0 : 0 0 :
0 0
Mon
–
11
–
MRX1
RM-Y1012
6
A diagram appears showing you how to connect a wide range of
equipment to your TV set. Follow the instructions and press the
OK button to remove the picture and continue the automatic
process.
OK button to remove the picture and continue the automatic
process.
The connection diagram should be used as a guide only as
most equipment can be connected to more than one type of
TV socket. Once the TV has completed the automatic
tuning process, refer to the ‘Connection Guide’ section on
page 27 for further information on getting the best set up for
your equipment.
most equipment can be connected to more than one type of
TV socket. Once the TV has completed the automatic
tuning process, refer to the ‘Connection Guide’ section on
page 27 for further information on getting the best set up for
your equipment.
7
The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
button to select Yes.
8
The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise automatic tuning
will not be completed.
will not be completed.
In some countries the TV Broadcaster installs the channels
automatically (ACI system). In this case, the TV
Broadcaster sends a menu in which you can select your city
by pressing the
Broadcaster sends a menu in which you can select your city
by pressing the
v
or
V
button and OK to store the
channels.
If no channels were found during the auto tune process, a
message appears automatically on the screen asking you to
connect the aerial. Check the aerial connection (refer to
page 18). Press the OK button to restart the auto tuning
process.
connect the aerial. Check the aerial connection (refer to
page 18). Press the OK button to restart the auto tuning
process.
9
After all available channels are captured and stored,
the Programme Sorting menu automatically appears
on the screen enabling you to change the order in
which the channels are stored.
a)
If you wish to keep the broadcast channels in the tuned order,
go to step 10.
b)
If you wish to store the channels in a different order:
1
Press the
v
or
V
button to select the programme
number with the channel (TV Broadcast) you wish
to move. Press the
b
button.
2
Press the
v
or
V
button to select the new
programme number position for your selected
channel (TV Broadcast). Press the OK button to store.
3
Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
the order of the other channels.
10
Press the MENU button to remove the menu from the screen
Auto Tuning
Programmes found:
4
No channel found.
Please connect aerial
Confirm
Programme Sorting
01
02
03
04
05
06
07
08
TVE
TVE2
TV3
C33
C27
C58
S02
S06
Programme Sorting
01
TVE
01
02
03
0
4
05
06
07
08
TVE
TVE2
TV3
C33
C27
C58
S02
S06
Do you want to start
automatic tuning?
Yes
No
OK
Please connect your equipment
according to this chart
according to this chart
DVD
Your TV set is now ready for use
Introducing and Using the Menu System
Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons
on the Remote Control to operate the menu system:
1
To switch on the menu screens:
Press the MENU button to switch the first level menu on.
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset:
Noise Reduction:
Auto
Colour Tone:
Normal
Picture Adjustment
Select:
Enter: OK
Exit: MENU
Picture Mode:
Live
Contrast:
Reset:
Noise Reduction:
Auto
Colour Tone:
Normal
2
To navigate through the menus:
• To highlight and select the desired menu or option, press
v
or
V
.
• To enter the selected menu or option, press OK or
b
.
• To return to the last menu or option, press OK or
B
.
• To alter the settings of your selected option, press
v
/
V
/
B
or
b
.
• To confirm and store your selection, press OK.
3
To switch off the menu screens:
Press the MENU button to remove the menu from the screen.
–
12
–
MRX1
RM-Y1012
The Picture Adjustment Menu
The “Picture Adjustment” menu allows you to
alter the picture settings.
To do this:
Press the MENU button and then press OK to
Press the MENU button and then press OK to
enter this menu. Next, press
v
or
V
to select the
desired option and press OK. Finally, read below
how to operate into each option.
how to operate into each option.
Picture Mode This option allows you to customise the Picture Mode based on the programme
you are watching. After selecting this option press OK. Next, press repeatedly
v
or
V
to select:
Live
(for live broadcast programmes, DVD and Digital Set Top Box
receivers).
receivers).
Movie
(for films).
Personal (for individual settings).
Once you have selected your desired option, press OK to store.
"Brightness", "Colour" and "Sharpness" level of "Live" and "Movie" mode are fixed on the
factory to get the best picture quality.
Contrast
Press
B
or
b
to reduce or enhance picture contrast. Next, press OK to store.
Brightness
Press
B
or
b
to darken or brighten the picture. Next, press OK to store.
This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”.
Colour
Press
B
or
b
to decrease or to increase color intensity. Next press OK to store.
This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”.
Hue
Press
B
or
b
to decrease or to increase the green tones. Next press OK to store.
This option only appears for NTSC signal (e.g. USA video tapes).
Sharpness
Press
B
or
b
to soften or to sharpen the picture. Next press OK to store.
This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”.
,
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset:
Noise Reduction:
Auto
Colour Tone:
Normal
Picture Adjustment
Select:
Back:
Enter:
OK
Picture Mode:
Live
Contrast:
Reset:
Noise Reduction:
Auto
Colour Tone:
Normal
Film Mode:
Auto
MENU
continued...
The Sound Adjustment Menu
The “Sound Adjustment” menu allows you to
alter the sound settings.
alter the sound settings.
To do this:
Press the MENU button and press
Press the MENU button and press
v
to select
, then press OK to enter this menu. Next,
press
v
or
V
to select the desired option and
press OK. Finally, read below how to operate
into each option.
into each option.
Sound
This option allows you to customise the Sound Effect. After selecting this
Effect
option press OK. Next, press repeatedly
v
or
V
to select:
Dolby*
(Dolby Virtual, simulates the sound effect of “Dolby Surround Pro
Virtual
Logic”).
Dynamic (“BBE High Definition Sound system”** intensifies clarity and presence
of sound for better intelligibility and musical realism).
Natural
(Enhances clarity, detail and presence of sound by using “BBE High
Definition Sound system”**).
Off
(Flat response).
Once you have selected your desired option, press OK to store.
Treble
Press
B
or
b
to decrease or to increase higher-frequency sounds. Next, press OK to
store.
Bass
Press
B
or
b
to decrease or to increase the lower-frequency sounds. Next, press OK
to store.
Balance
Press
B
or
b
to emphasise the left or the right speaker. Next, press OK to store.
Reset
Press OK to reset the sound to the factory preset levels.
Dual
Press
b
. Next:
Sound
• For a Stereo broadcast:
Press
v
or
V
to select Stereo or Mono. Next press OK to store.
• For a bilingual broadcast:
Press
v
or
V
to select Mono (for mono channel if available), A (for channel 1) or B
(for channel 2). Next press OK to store.
Auto
Press
b
. Next press
v
or
V
to select On (the volume level of the channels will
Volume
stay the same, independent of the broadcast signal, e.g. in the case of advertisements)
or Off (the volume level changes according to the broadcast signal). Next press OK to
store.
or Off (the volume level changes according to the broadcast signal). Next press OK to
store.
If you select “Dolby Virtual” on the “Sound Effect” option, the “Auto Volume” option will
automatically be switched to “Off” and vice versa.
automatically be switched to “Off” and vice versa.
continued...
,
m
Sound Adjustment
Sound Effect:
Dolby Virtual
Treble:
Bass:
Balance:
Reset
Dual Sound:
Stereo
Auto Volume:
Off
TV Speakers:
Main
Audio Output:
Fix
Speaker Link:
Off
Headphones Set Up
Select:
Enter:
OK
Exit:
MENU
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset:
Noise Reduction:
Auto
Colour Tone:
Normal
Sound Adjustment
Sound Effect:
Dolby Virtual
Treble:
Bass:
Balance:
Reset
Dual Sound:
Stereo
Auto Volume:
Off
TV Speakers:
Main
Audio Output:
Fix
Speaker Link:
Off
Headphones Set Up
Select:
Back:
Enter:
OK
MENU
Click on the first or last page to see other KE-P42MRX1 / KE-P50MRX1 service manuals if exist.