Sony KDS-R60XBR2 / KDS-R70XBR2 Service Manual ▷ View online
– 4 –
KDS-R60XBR2/R70XBR2
RM-YD009
RM-YD009
TV Controls
PO WER
PO WER
LAMP
TIMER
PO WER
LAMP
TIMER
PO WER
LAMP
TIMER
3
#
TV/VIDEO
VOLUME
CHANNEL
3
#
MENU
PO WER
PO WER
LAMP
TIMER
6
9
7
8
3
2
1
2
1
0
3
5
4
For KDS-R60XBR2
For KDS-R70XBR2
Item
Description
1
TIMER LED
When the timer is set, this LED will remain lit even if the TV is turned off. For details, see
page 61.
page 61.
2
LAMP LED
Blinks in red when the lamp for the light source has burned out. For details, see “Replacing the
Lamp” on page 66.
Lamp” on page 66.
3
POWER LED
Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see the contacting Sony information on page 2).
When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is
not securely attached (see page 68).
indicate the display unit needs servicing (see the contacting Sony information on page 2).
When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is
not securely attached (see page 68).
4
(IR) Infrared
Receiver
Receiver
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Do not put anything near the sensor, as its function may be affected.
5
POWER
Press to turn on and off the TV.
6
MENU
Press to display MENU with TV functions and settings (see “Overview of MENU” on page 47).
7
TV/VIDEO
Press to cycle through the video inputs. If you set a certain input to Skip in Label Video
Inputs, then the input will not appear. For details, see page 60.
In the MENU screen, this button serves as confirming the selection or setting.
Inputs, then the input will not appear. For details, see page 60.
In the MENU screen, this button serves as confirming the selection or setting.
8
VOLUME –/+
Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
9
CHANNEL –/+
Press to scan through channels. To scan quickly through channels, press and hold down either
–/+. In the MENU screen, these buttons serve as up/down buttons.
–/+. In the MENU screen, these buttons serve as up/down buttons.
q;
Speaker
Outputs the audio signal.
– 5 –
KDS-R60XBR2/R70XBR2
RM-YD009
RM-YD009
Replacing the Lamp
The projection lamp, like all lamps, will eventually lose brightness and
functionality, which affects the overall performance of your TV. How long
the lamp maintains its brightness will vary depending upon your usage and
environmental conditions. To maintain the quality of your viewing
experience, Sony recommends that you replace the lamp (1) after
approximately 4,000 hours of use; (2) when the screen becomes dark or the
color looks unusual; (3) when the LAMP LED on the front of the TV blinks;
or (4) when the lamp replacement message appears on the TV screen.
functionality, which affects the overall performance of your TV. How long
the lamp maintains its brightness will vary depending upon your usage and
environmental conditions. To maintain the quality of your viewing
experience, Sony recommends that you replace the lamp (1) after
approximately 4,000 hours of use; (2) when the screen becomes dark or the
color looks unusual; (3) when the LAMP LED on the front of the TV blinks;
or (4) when the lamp replacement message appears on the TV screen.
❑
Use the supplied Sony XL-5300 lamp for replacement. Use of any other
lamp may damage the TV.
lamp may damage the TV.
❑
Do not remove the lamp for any purpose other than replacement. Doing
so may cause injury or fire.
so may cause injury or fire.
❑
Do not put flammable materials and metal objects inside the lamp
receptacle of the TV after removing the lamp. Doing so may cause fire
or electrical shock. Do not touch the lamp receptacle once the lamp has
been removed.
receptacle of the TV after removing the lamp. Doing so may cause fire
or electrical shock. Do not touch the lamp receptacle once the lamp has
been removed.
❑
When the lamp eventually burns out, you may hear a noticeable pop
sound. This is normal and it is inherent to this type of lamp.
sound. This is normal and it is inherent to this type of lamp.
❑
In rare instances, the bulb may pop inside the lamp unit, but the lamp
unit is designed to contain all of the broken glass pieces inside the lamp
unit.
unit is designed to contain all of the broken glass pieces inside the lamp
unit.
❑
This TV’s lamp contains mercury and should be disposed of properly.
Consult your local authorities regarding safe disposal. The material
contained in this lamp are similar to those of a fluorescent lamp, so you
should dispose of it in the same way.
Consult your local authorities regarding safe disposal. The material
contained in this lamp are similar to those of a fluorescent lamp, so you
should dispose of it in the same way.
How to Replace the
Lamp
Lamp
1
Turn off the power on the main unit. Wait several minutes, then unplug
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
2
Wait at least 30 minutes after unplugging the power cord to allow the
lamp to cool down before replacing it. To avoid being burned, do not
touch the lamp receptacle once the lamp has been removed.
lamp to cool down before replacing it. To avoid being burned, do not
touch the lamp receptacle once the lamp has been removed.
WARNING
Electric appliances can cause fire or high temperature, resulting in
injury or death. Be sure to follow the instructions below.
injury or death. Be sure to follow the instructions below.
– 6 –
KDS-R60XBR2/R70XBR2
RM-YD009
RM-YD009
3
Take the new lamp out of the box.
Do not touch the glass portion of the new lamp.
Do not touch the glass portion of the new lamp.
4
Remove the outside lamp cover.
Release the clamp as shown in the illustration below.
5
Remove the lamp door.
Turn the screw counterclockwise, and then turn the knob to the left until
the marks on the lid and the case line up. Remove the door.
the marks on the lid and the case line up. Remove the door.
6
Pull out the lamp.
Hold the indents on the top and bottom of the lamp, as shown in the
illustration, and pull the lamp straight out.
illustration, and pull the lamp straight out.
✍
Do not shake the lamp. Vibration can damage the lamp or shorten
its life.
its life.
✍
Avoid touching the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
lamp receptacle. This may reduce picture quality or lamp life.
Hold this part of the lamp
– 7 –
KDS-R60XBR2/R70XBR2
RM-YD009
RM-YD009
7
Put the new lamp into its place.
Make sure the lamp is securely mounted into the compartment. Failure to
do so may cause a fire or the screen to go dark.
Make sure the lamp is securely mounted into the compartment. Failure to
do so may cause a fire or the screen to go dark.
8
Reattach the lamp door.
To secure the door, turn the knob to the right while pushing the door in,
until the marks on the lid and the case line up. Then, turn the screw
clockwise to tighten the door.
until the marks on the lid and the case line up. Then, turn the screw
clockwise to tighten the door.
✍
Do not touch the inside of the lamp compartment.
✍
The lamp is very hot immediately after use. Never touch the glass
portion of the lamp or the surrounding parts.
portion of the lamp or the surrounding parts.
✍
After the used lamp has cooled, place it into the empty box of the
replacement lamp. Never put the used lamp into a plastic bag.
replacement lamp. Never put the used lamp into a plastic bag.
✍
The lamp compartment is tilted, as shown in the following
illustration.
illustration.
✍
If the lamp is not securely reattached, the self-diagnostic function
may be triggered and the POWER LED blinks three times (see
page 37).
may be triggered and the POWER LED blinks three times (see
page 37).
Click on the first or last page to see other KDS-R60XBR2 / KDS-R70XBR2 service manuals if exist.