DOWNLOAD Sony KDL-70X4500 (serv.man2) Service Manual ↓ Size: 2.69 MB | Pages: 38 in PDF or view online for FREE

MODEL

COMMANDER

RMF-GD001

DEST.

Hong Kong

MODEL

COMMANDER

DEST.

RMF-GD001

KDL-70X4500

KDL-70X4500 (HK)     2

Analogue: B/G, I, D/K, M
Digital: GB20600-2006
Analogue:  PAL, PAL60 (only video input), SECAM, NTSC3.58,

NTSC4.43 (only video input) 

Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4

Analogue:  B/G: VHF:  E2~E12/UHF: E21~E69/CATV: S01~S03, S1~S41

I:     UHF: B21~B69/CATV: S01~S03, S1~S41
D/K: VHF:  C1~C12, R1~R12/UHF: C13~C57, R21~R60/ 

CATV: S01~S03, S1~S41, Z1~Z39

M:   VHF: A2~A13/UHF: A14~A79/CATV: A-8~A-2, A~W+4,

W+6~W+84

Digital: GB20600-2006 

1, 2

Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P

B

/C

B

: 0.7 Vp-p, 75 ohms/

P

R

/C

R

: 0.7 Vp-p, 75 ohms

HDMI IN1, 2, 3, 4

Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack) (HDMI IN 1 only)

 PC Input 

Video output (phono jack)

Audio output (phono jacks)

 PC audio input (minijack)

USB port

Headphonesjack 

LAN

10BASE-T/100BASE-TX connector (Depending on the operating environment of 
the network, connection speed may differ. 10BASE-T/100BASE-TX communication 
rate and communication quality are not guaranteed for this TV.)  

Screen size (measured diagonally)

70 inches 
(Approx. 177.8 cm)

Power
consumption 

in “Home”/
“Standard” mode 

600 W

in “Shop”/“Vivid”
mode 

680 W

Standby power consumption*

0.7W (40 W when “Quick Start” is set to “On”)    

LCD (Liquid Crystal Display) Panel

TV system

Colour/video system

Channel coverage

Panel system

Sound output

10 W+ 10 W, 12 W + 12 W (Woofer) 

Antenna/cable

75 ohmexternal terminal for VHF/UHF 

1

S video input (4-pin mini DIN)

1, 2, 3 

Video input (phono jacks)

1, 2, 3 

Audio input (phono jacks)

DIGITAL AUDIO OUT
(OPTICAL)  

Digital optical jack

PC IN (RGB) 

PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p 

DMPORT

DIGITAL MEDIA PORT

Power requirements

220 V – 240 V AC, 50 Hz

Display resolution

1,920 dots (horizontal) 

× 1,080 lines (vertical)

KDL-70X4500 (HK)     3

* Specified standby power is reached after the TV finishes necessary internal processes.

Design and specifications are subject to change without notice.

*  1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This

affects the “Video Settings” menu and “Screen” menu settings.
To view PC contents, set “Game/Text Mode” to “On”, “Wide Mode” to “Full”, and “Display Area” to “Full
Pixel”.   

• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical

frequency (boldfaced). 

Dimensions
(Approx.)
(w 

× h × d)  

withTable-Top
Stand

1,850 

× 1,065 × 401 mm

without Table-Top
Stand 

1,850 

× 1,012 × 153 mm

Mass
(Approx.) 

withTable-Top
Stand  

86.5 kg

withoutTable-Top
Stand  

72.5 kg

Optional
accessories 

Wall-Mount
Bracket 

SU-WL500

Colour Variation
Unit 

×

VGA

×

640

×

480

37.5

75

VESA

720

×

400

31.5

70

VGA-T

SVGA

×

800

×

600

46.9

75

VESA

XGA

×

1024

×

768

56.5

70

VESA

1024

×

768

60.0

75

VESA

WXGA

×

×

1280

×

768

60.3

75

×

SXGA

×

64.0

HDTV

×

CEA-861*

KDL-70X4500 (HK)     4

These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.

An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.

!

Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.

It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.

NOTE: Do  not modify the original design without obtaining

written permission from the manufacturer or you will
void the original parts and labor guarantee.

When repairing the LCD panel, be sure you are grounded by
using a wrist band.

When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of

electric shock.

2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of

high humidity for an extended period of time.

4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within

the module.

6) Disconnect the AC power when replacing the backlight (CCFL)

or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)

7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter

circuit. Damaging the wires may cause a short.

9) Protect the panel from ESD to avoid damaging the electronic

circuit (C-MOS).