Sony KDL-60W605B Service Manual ▷ View online
KDL-60W605B 13
SECTION 3 - REPAIR INFORMATION
11. Press
1
until
002 DEST item displays.
DIGITAL
SERVICE
002 MODEL
002 DEST
SBTVD-T_BASE
CAUTION: If the incorrect Destination Data Value is selected,
it may corrupt the Sofware requiring a Main Board replacement.
it may corrupt the Sofware requiring a Main Board replacement.
12. Press
3
until the correct destination of the TV displays.
(Use the table below for reference).
Model Name
Destination
Data Value
BRAZIL
SBTVD-T_BASE
KDL-60W605B
13. Press
MUTE
then
0
to save the changes.
DIGITAL
SERVICE
002 MODEL
002 DEST
WRITE
SBTVD-T_BASE
14. Press
1
until
003 MODELNAME displays.
DIGITAL
SERVICE
002 MODEL
003 MODELNAME
_________
15. Press
3
until the model displayed matches the model of the TV.
CAUTION: The Model Name can only be selected once. Be sure
to verify the information is correct before saving the changes.
to verify the information is correct before saving the changes.
16. Press
MUTE
then
0
to save the changes.
DIGITAL
SERVICE
002 MODEL
003 MODELNAME
KDL-60W605B
WRITE
17. Locate the Serial Number for the TV on the side of the Rear Cover.
MODEL NO
KDL-60W605B
SERIAL NO
2000001
18. Press
1
until
004 SERIAL item displays.
DIGITAL
SERVICE
002 MODEL
004 SERIAL
19. Press
0
to display the
Serial Number Edit option.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
KDL-60W605B 14
SECTION 3 - REPAIR INFORMATION
20. Press
to display the
Serial Number input screen.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
Please Input serial number
(0000000-99999999)
_ _ _ _ _ _ _
CAUTION: The Serial Number can only be selected once. Be sure
to verify the information is correct before saving the changes.
to verify the information is correct before saving the changes.
21. Enter the Serial Number of the TV.
NOTE:
If the incorrect Serial Number is entered, press
RETURN
to go back to the Serial Number input screen and re-enter
the correct number.
the correct number.
22. Press
to save the Serial Number.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
2000001
WRITE
23. Press
1
until
006 VAR_TYPE item displays.
DIGITAL
SERVICE
002 MODEL
006 VAR_TYPE
24. Press
3
until
STD option displays.
DIGITAL
SERVICE
002 MODEL
006 VAR_TYPE
STD
25. Press
MUTE
then
0
to save the changes.
DIGITAL
SERVICE
002 MODEL
006 VAR_TYPE
STD
WRITE
26. Cycle AC Power (Unplug and plug AC Cord from the outlet).
27. Access
Service Mode, by pressing the following buttons within
1 second of each other:
DISPLAY
Channel
5
Volume
+
Power
I/0
28. When the
DIGITAL Menu appears, press
2
until
002 MODEL
category displays.
DIGITAL
SERVICE
002 MODEL
000 BOARD CHECK
000 BOARD CHECK
KDL-60W605B 15
SECTION 3 - REPAIR INFORMATION
29. Press
0
to select the
000 BOARD CHECK item.
DIGITAL (MODEL)
SERVICE
Board Check
1. Replace MAIN BOARD (and TUNER BOARD)
2. Replace TUNER BOARD only
2. Replace TUNER BOARD only
When replacing the Main Board and/or Tuner Board:
30. Press
1
to verify the Main Board replacement results.
NOTE:
Either one of the following messages indicates
a correct process.
DIGITAL (MODEL)
SERVICE
Board Check
OK
TUNER BOARD OPTION: STANDARD
TUNER BOARD OPTION: STANDARD
DIGITAL (MODEL)
SERVICE
Board Check
OK
TUNER BOARD OPTION: PCA / HTL
TUNER BOARD OPTION is changed correctly
TUNER BOARD OPTION: PCA / HTL
TUNER BOARD OPTION is changed correctly
CAUTION: If the Main Board is a mismatch to the Tuner Board,
a “NG: WRONG COMBINATION OF MAIN BOARD AND TUNER
BOARD” will display.
a “NG: WRONG COMBINATION OF MAIN BOARD AND TUNER
BOARD” will display.
31. Press
RETURN
When replacing the Tuner Board only:
32. Press
2
to verify the Tuner Board replacement results.
DIGITAL (MODEL)
SERVICE
Board Check
OK
TUNER BOARD OPTION: STANDARD
TUNER BOARD OPTION: STANDARD
CAUTION: If the Tuner Board is a mismatch to the Main Board,
a “NG: DIFFERENT KIND OF TUNER BOARD HAS BEEN
CONNECTED” will display.
a “NG: DIFFERENT KIND OF TUNER BOARD HAS BEEN
CONNECTED” will display.
33. Press
RETURN
on the Remote Commander.
34. Turn the TV OFF.
35. Press
on the Remote Commander and Power button
I/0
on TV
to set unit to Shipping Condition.
KDL-60W605B 16
SECTION 3 - REPAIR INFORMATION
REMOVING THE SPEAKERS
1. Press down the connector clip to disconnect from each Speaker, then lift
to detach.
REMOVING THE WIRELESS LAN CARD
1. Release the Wireless LAN Card clip, then disconnect connector and
lift to detach.
REPLACING THE SWITCH UNIT
1. Disconnect connector from Switch Unit, then release clips to detach.
2. Install the new Switch Unit and connector.
36. Clear the
Self Check screen.
a. Press
POWER
to exit
Service Mode.
b. Press the following buttons on the
Remote Commander within
1 second of each other:
DISPLAY
Channel
5
Volume
-
Power
I/0
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
120123132522 120123113645 --------------------- 02
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- -------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
Error Count
c. To clear the error history and error count press
8
0
.
d. Press
POWER
to exit
Self Check Mode.
37. Cycle AC Power (Unplug and plug AC Cord from the outlet).
Click on the first or last page to see other KDL-60W605B service manuals if exist.