Sony KDL-60EX640 / KLV-60EX640 Service Manual ▷ View online
KLV-60EX640(PA)/KDL-60EX640(AUS)
25
WIRE DRESSING-1
Organize the wires below the screw terminal.
With the edge of the wire tie as reference,
adhere perpendicularly to the wire.
adhere perpendicularly to the wire.
The wire is laid below the screw terminal.
Use the upper edge screw and boss as reference.
The wire is between the T-shaped hole and the screw.
APPENDIX-2
KLV-60EX640(PA)/KDL-60EX640(AUS)
26
WIRE DRESSING-2
APPENDIX-2
1
2
3
4
5
6
1
2
3
4
5
6
Organize the wires above the screw terminal.
Use the screw hole and support edge as reference.
Use the screw hole and support edge as reference.
Use the screw hole and support edge as reference.
KLV-60EX640(PA)/KDL-60EX640(AUS)
27
Model Name:
KLV-60EX640/KDL-60EX640
Serial Number:
0123450
Software Version:
v7.000-1.206
Device ID:
FF:FF:FF:FF:FF:FF
THE CONFIRMATION OF THE SOFTWARE VERSION OF THE TV SET
Entering product information of setting menu.
Please use the latest software.
[HOME] - [Settings] - [Set-up] - [Product Information]
P-2 (PA) : KLV-60EX640
sony_fw_2012_xxxx_chpaipf_2h.pkg
P-2 (AUS) : KDL-60EX640
sony_fw_2012_xxxx_chpaipf_2h.pkg
APPENDIX-3
SOFTWARE DATA UPDATE
Note: When changing Main board, Model Name and Serial Number will not be
displayed.
SOFTWARE DOWNLOAD
Store the software package to USB memory. (Applicable USB memory : Format by FAT32, USB2.0 type )
For USB, please store
only one file
for software update.
KLV-60EX640(PA)/KDL-60EX640(AUS)
28
Note: Do not connect USB memory in standby mode.
Starting update
Lights up Red LED and Orange LED is flashing. (1-2min)
Lights up Red LED and Orange LED is flashing. (1-2min)
Finish update
Lights up Green LED again and TV is turned on.
Lights up Green LED again and TV is turned on.
Lights up Green LED. (no picture)
Please confirm whether it is the latest software.
Product information of setting menu.
[HOME] - [Settings] - [Set-up] - [Product Information]
APPENDIX-3
SOFTWARE UPDATE BY USB MEMORY
1. Turn on the TV.
2. Unplug the AC power code.
3. Connect the USB memory.
4. Plug the AC power cord then update starts automatically.
5. Unplug AC power cord and disconnect USB memory.
6. Plug the AC power cord then turn on the TV.
CONFIRM SOFTWARE VERSION
