View Sony KDL-55X4500 Service Manual online
Digital: MPEG-2 [email protected]/HL
I: UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
B/G: VHF: E2 to E12/ UHF: E21 to E69/
CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/
CATV: A-8 to A-2, A to W+4, W+6 to W+84
720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
(HDMI IN 1 only)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
environment of the network, connection speed may differ. 10BASE-T/
100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)
** Specified standby power is reached after the TV finishes necessary internal processes.
These values are required by SJ/T11343-2006 <General specification for digital television LCD displays> in normal
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
appear as shown in this manual or in supplements
published by Sony.
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
void the original parts and labor guarantee.
using a wrist band.
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
3) Do not leave the module in high temperatures or in areas of
5) Avoid contact with water. It may cause a short circuit within
(High voltage occurs at the inverter circuit at 650Vrms.)
8) Use care when handling the wires or connectors of the inverter