Sony KDL-55NX817 / KDL-60NX817 Service Manual ▷ View online
KDL-55NX817/60NX817
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
157
A-1788-134-A
BUHT BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND
COMPLETE ANY SERVICE ADJUSTMENTS.
158
4-188-665-01
BRACKET, SIDE JACK
159
4-188-666-01
BRACKET, TERMINAL
160
1-474-254-11
G10 BOARD, COMPLETE
161
4-193-111-01
SHEET, INSULATION (G60)
162
1-474-255-11
G11 BOARD, COMPLETE
163
4-188-691-01
SHEET, INSULATION (GS)
2-990-421-41
SCREW (+PSW) (M3X6)
1-3-2. KDL-60NX817 ONLY
CAUTION: Refer to
“Special Handling Instructions When Replacing the LCD Panel Assembly” on page 5
A Gently peel-off Terminal Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
C Remove 2 screws from Wireless LAN Card to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
E Gently peel-off Tape PWB (H) to detach from HLT Board
F Remove 9 screws from BUHT Board to detach from LCD Panel Assembly
G Release 2 clips to detach Side Jack Bracket from BUHT Board
H Release 2 clips to detach Terminal Bracket from BUHT Board
I Slide-out 2 Attachment GL pieces to detach from LCD Panel Assembly
J Remove 3 screws from G10 Board to detach from LCD Panel Assembly
K Gently peel-off Insulation Sheet (G60) to detach from LCD Panel Assembly
L Remove 1 screw from G11 Board to detach from LCD Panel Assembly
M Gently peel-off Insulation Sheet (GS) to detach from LCD Panel Assembly
Note: The Tape PWB (H), Side Jack Label, Terminal Label,
Insulation Sheet (G60), Insulation Sheet (GS) and
Attachment GL pieces are not included with the
LCD Panel Assembly and must be replaced
when replacing the LCD Panel Assembly.
151
NA
P-MOD/T-MOD (LCD PANEL ASSEMBLY)
FOR ALL P-MOD/T-MOD (LCD PANEL ASSEMBLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
152
4-199-300-01
LABEL, TERMINAL
153
4-199-294-01
LABEL, SIDE JACK (L)
154
1-487-819-11
CARD, WIRELESS LAN
155
A-1782-538-A
HLT(STD) BOARD, MOUNTED
156
4-195-059-01
TAPE, PWB (H)
157
156
155
158
159
161
160
154
153
152
151
162
163
F
E
D
G
H
K
I
J
C
B
A
L
M
KDL-55NX817/60NX817
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-4. CLEANING THE LCD PANEL ASSEMBLY
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
®
Wipe the LCD screen gently with a soft cloth.
®
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm
water.
®
If using a chemically pretreated cloth, please follow the instruction provided on the package.
®
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
®
Periodic vacuuming of the ventilation openings is recommended to ensure the proper ventilation.
1-5. SCREW LEGEND
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-167-019-11
SCREW, +PSW M3X8
RC(13), AC CVR(1)
14
□
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(2), BTM FRM to PNL(2)
4
▽
3-452-815-01
SCREW, +PSW M5X20
TABLE-TOP STAND(3)
3
●
2-990-421-41
SCREW (+PSW) (M3X6)
BUHT(9), G9B(3), WIFI(2), ANTENNAS(2), BEZ BTM(5)
21
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-167-019-11
SCREW, +PSW M3X8
RC(13), AC CVR(1)
14
□
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(2), BTM FRM to PNL(2)
4
▽
3-452-815-01
SCREW, +PSW M5X20
TABLE-TOP STAND(5)
5
●
2-990-421-41
SCREW (+PSW) (M3X6)
BUHT(9), G10(3), G11(1), WIFI(2), ANTENNAS(2), BEZ BTM(5)
22
KDL-55NX817
KDL-60NX817
KDL-55NX817/60NX817
18
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-6-1. KDL-55NX817 ONLY
206
1-910-101-81
CONNECTOR ASSEMBLY 8P
207
1-838-263-11
(LVDS) FLEXIBLE FLAT CABLE 51P
251
1-838-371-11
CONNECTOR ASSEMBLY
252
1-838-300-11
CONNECTOR ASSEMBLY
253
1-910-101-88
CONNECTOR ASSEMBLY 3P
254
1-910-101-87
CONNECTOR ASSEMBLY 14P
255
1-910-101-89
CONNECTOR ASSEMBLY 5P
1-6. CONNECTORS
CN6150
CN6151
CN8500
CN6003
G9B
CN6002
CN2602
CN2600
CN5500
CN3800
CN4300
BUHT
SP
SP
HLT
WIFI
ILLUMINATION
MODULE
SWITCH UNIT
POWER SWITCH
TCON
SP
201
204
203
202
207
206
205
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-6-2. KDL-60NX817 ONLY
256
1-910-101-84
CONNECTOR ASSEMBLY 12P
257
1-910-101-85
CONNECTOR ASSEMBLY 6P
258
1-910-101-83
HARNESS ASSEMBLY
259
1-910-101-86
CONNECTOR ASSEMBLY 8P
260
1-838-264-11
(LVDS) FLEXIBLE FLAT CABLE 51P
201
1-838-372-11
CONNECTOR ASSEMBLY
202
1-910-101-78
CONNECTOR ASSEMBLY 14P
203
1-910-101-80
CONNECTOR ASSEMBLY 12P
* 204
1-910-060-21
CONNECTOR ASSEMBLY 6P
205
1-910-101-79
HARNESS ASSEMBLY
CN2602
CN2600
CN5500
CN3800
CN4300
BUHT
SP
SP
HLT
WIFI
ILLUMINATION
MODULE
SWITCH UNIT
POWER SWITCH
TCON
SP
CN6150
CN6152
CN6102
CN6101
CN6201
CN6003
G10
CN6002
G11
CN6800
CN6702
CN6701
CN6701
CN6801
254
253
252
255
256
257
258
260
259
251
KDL-55NX817/60NX817
19
DISASSEMBLY/PART NUMBER INFORMATION
1-7. ACCESSORIES AND PACKING
3-299-071-04
FLYER, SAFETY
4-180-196-61
MANUAL, INSTRUCTION
!
1-838-333-11
POWER-SUPPLY CORD (WITH CONN.)
*
4-208-536-21
SUPPLEMENT(STAND INSTALLATION)
1-8. MISCELLANEOUS
X-2548-310-1
BAG,SCREW ASSEMBLY (E)
CONTAINS THE FOLLOWING SCREWS:
3-452-815-01
SCREW, +PSW M5X20
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-260-179-01
LABEL,GLASS & TRANSMITTER
*
4-259-974-01
POST, PWB MINI
4-100-136-01
SHEET (CORE), C
(KDL-55NX817 ONLY)
*
4-188-689-01
SHEET, THERMAL (B2)
*
4-259-997-01
SHEET, THERMAL B SMALL
4-186-417-01
SPACER, PANEL
(KDL-60NX817 ONLY)
X-2549-230-1
SUPPORT BELT KIT
7-600-031-96
TAPE (3M 1350FW-1)15MMX66M WHT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
1-9. REMOTE COMMANDER
1-487-712-12
REMOTE COMMANDER (RM-YD042)
Click on the first or last page to see other KDL-55NX817 / KDL-60NX817 service manuals if exist.