Sony KDL-55NX810 / KDL-60NX810 (serv.man2) Service Manual ▷ View online
KDL-55/60NX810(CH)
57
1) 2 times blinkings (Main Power Error)
TROUBLE SHOOTING
3-4. STANDBY LED BLINK
2 times Blinkings
Check REG12V at
pins 6/7 of
CN3800 on
the BUHT Board
BUHT Board
Harness
G* Board
Replace
Between G* Board to
BUHT Board Harness
12V NG
12V OK
NG
OK
KDL-55/60NX810(CH)
58
TROUBLE SHOOTING
2) 3 times blinkings (DC Alert, Audio Error and Communication Error)
3 times Blinkings
Check D+3.3V at
JL3715 or JL3716
on the BUHT Board
IC4200,etc
(BUHT Board)
F3700,IC3700,etc
(BUHT Board)
Speaker
Check +5V_MAIN
at JL3731 or JL3732 on
the BUHT Board
Check
Speaker Impedance
at SP Connector
F3701,IC3701,etc
(BUHT Board)
Check
X_ASW_PROTECT
at pin 29 of IC5000
on the BUHT Board
on the BUHT Board
Check +12.5V
at pin 2 of
CN3800 on
the BUHT Board
G* Board
Check +12.5V_AU1
at F4200 on
the BUHT Board
F4200,IC4200,etc
(BUHT Board)
IC9000,etc
(BUHT Board)
DC_ALERT
NG
OK
AUDIO
AUDIO
FE/BE Communication
NG
OK
NG
OK
NG
OK
NG
OK
Pin: Low
Pin: High
KDL-55/60NX810(CH)
59
TROUBLE SHOOTING
3) 4 times blinkings (Backlight Driver Communication Error)
4 times Blinkings
Check the harness between the
T-con board and the LED driver board,
between the G board and the
LED driver board.
LED Driver Board
(Panel)
Change the LED driver
board (Panel).
T-con Board
(Panel)
Harness
NG
OK
NG
OK
KDL-55/60NX810(CH)
60
TROUBLE SHOOTING
4) 5 times blinkings (T-con Error)
5 times Blinkings
Check PANEL_VCC
at JL3806
on the BUHT Board
G* Board
Between G* to Panel
harness check
(a)
LVDS Harness
check
Panel (T-con)
change
BUHT Board
Harness
LVDS Harness
Panel (T-con)
about 5V ： 22” Model
about 12V : ex. 22” Model
about 12V : ex. 22” Model
(a) exclude 60Hz Panel Model
NG
OK
NG
OK
NG
OK
NG
OK
Click on the first or last page to see other KDL-55NX810 / KDL-60NX810 (serv.man2) service manuals if exist.