Sony KDL-52XBR7 Service Manual ▷ View online
5
KDL-52XBR7
KDL-52XBR7
Television system
NTSC
American
TV
Standard
ATSC (8VSB terrestrial) ATSC compliant 8VSB
QAM on cable
QAM on cable
ANSI/SCTE 07 2000
Channel coverage
Analog
2-69
2-69
Terrestrial
1-135
Cable
Digital
2-69
2-69
Terrestrial
1-135
Cable
Antenna
75-ohm external terminal for RF inputs
Panel System
LCD (Liquid Crystal Display) Panel
Display Resolution (horizontal x vertical)
1,920 dots x 1,080 lines
Screen Size (measured diagonally)
approx. 52 inches
Supplied Accessories
Remote Commander RM-YD024
Two Size AA (R6) Batteries
AC Power Cord
Cable Holder (1 attached to the Table-Top Stand)
Operating Instructions
Quick Setup Guide
Warranty Card
Safety and Regulatory Booklet
Two Size AA (R6) Batteries
AC Power Cord
Cable Holder (1 attached to the Table-Top Stand)
Operating Instructions
Quick Setup Guide
Warranty Card
Safety and Regulatory Booklet
Optional Accessories
Connecting Cables
Support Belt Kit
Colour Variation Unit
Wall-Mount Bracket
SU-WL500
TV-Stand
WS-S10LS
Support Belt Kit
Colour Variation Unit
Wall-Mount Bracket
SU-WL500
TV-Stand
WS-S10LS
Speaker/Front (2)
mm
34 x 104
in
1
3/8
x 4
1/8
Tweater (2)
mm
30
in
1
1/8
x 1
Assist Woofer
mm
55 x 120
in
2
1/8
x 4
3/4
Dimensions (W x H x D)
with stand
mm
1,257 x 874 x 346 mm
in
49
1/2
x 34
1/2
x 13
5/8
in
without stand
mm
1,257 x 831 x 127 mm
in
49
1/2
x 32
3/4
x 5 in
wall-mount hole pattern (mm)
300 x 300 mm
M6 X 8 -12
Mass
with stand
kg
42.5 kg
lbs
94 lbs
without stand
kg
35.5 kg
lbs
79 lbs
All measurements are approximations.
wall-mount screw size (mm)
10W(L)+10W(R)+15W (Assist Woofer)
Speaker Output
KDL-52XBR7
6
KDL-52XBR7
KDL-52XBR7
WARNINGS AND CAUTIONS - ENGLISH
CAUTION
These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualifi ed to do so.
than that contained in the operating instructions unless you are qualifi ed to do so.
CARRYING THE TV
"E
s "EFORE
PEOPLE
s 7HEN
ILLUSTRATED
s ,IFT
UNDERNEATH
s $O
WARNING!!
An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is
directly connected to the ac power line.
directly connected to the ac power line.
!
SAFETY-RELATED COMPONENT WARNING!!
Components identifi ed by shading and
!
mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation.
Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit
adjustments that are critical for safe operation are identifi ed in this manual. Follow these procedures whenever critical components are replaced or
improper operation is suspected.
adjustments that are critical for safe operation are identifi ed in this manual. Follow these procedures whenever critical components are replaced or
improper operation is suspected.
7
KDL-52XBR7
KDL-52XBR7
WARNINGS AND CAUTIONS - FRENCH
ATTENTION!!
Ces instructions de service sont à l’usage du personnel de service qualifi é seulement. Pour prévenir le risque de choc électrique, ne pas faire
l’entretien autre que celui contenu dans le Mode d’emploi à moins que vous soyez qualifi é faire ainsi.
l’entretien autre que celui contenu dans le Mode d’emploi à moins que vous soyez qualifi é faire ainsi.
POUR TRANSPORTER LE TÉLÉVISEUR
Assurez-vous de suivre les consignes suivantes pour
protéger votre bien et éviter les blessures graves.
protéger votre bien et éviter les blessures graves.
• Avant de transporter le téléviseur, débranchez
tous les câbles.
• Le transport d’un téléviseur de grande taille doit
être effectué par au moins deux personnes.
• Lorsque vous transportez le téléviseur, placez vos
mains tel qu’illustré et tenez solidement
l’appareil. Ne soumettez pas le téléviseur à des
chocs ou à des vibrations, ni à une force excessive.
l’appareil. Ne soumettez pas le téléviseur à des
chocs ou à des vibrations, ni à une force excessive.
• Soulevez le téléviseur en plaçant la paume de votre
main directement en dessous du panneau, mais :
• n’appuyez pas sur la région de la grille de
haut-parleur
• ne placez pas vos doigts dans le sillon au-
dessus de la région de la grille de haut-parleur
• n’imposez pas de charge sur le panneau ACL.
• ne soulevez pas le téléviseur en plaçant vos
mains en dessous au centre.
Afi n d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout dépannage. Le
chássis de ce récepteur est directement raccordé à l’alimentation du secteur.
chássis de ce récepteur est directement raccordé à l’alimentation du secteur.
!
ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!
Les composants identifi es par une trame et par une marque
!
sur les schemas de principe, les vues explosees et les listes de pieces sont d’une
importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le
present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement
sont identifi es dans le present manuel. Suivre ces procedures lors de chaque remplacement de composants critiques, ou lorsqu’un mauvais
fonctionnement suspecte.
present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement
sont identifi es dans le present manuel. Suivre ces procedures lors de chaque remplacement de composants critiques, ou lorsqu’un mauvais
fonctionnement suspecte.
8
KDL-52XBR7
KDL-52XBR7
SAFETY-RELATED COMPONENT WARNING
There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and
!
mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number
specifi ed in the electrical parts list to prevent electric shock, fi re, or other hazard.
specifi ed in the electrical parts list to prevent electric shock, fi re, or other hazard.
NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and
labor guarantee.
labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by using a wrist band.
When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover.
To avoid damaging the LCD panel:
do not press on the panel or frame edge to avoid the risk of electric shock.
do not scratch or press on the panel with any sharp objects.
do not leave the module in high temperatures or in areas of high humidity for an extended period of time.
do not expose the LCD panel to direct sunlight.
avoid contact with water. It may cause a short circuit within the module.
disconnect the AC adapter when replacing the backlight (CCFL) or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
always clean the LCD panel with a soft cloth material.
use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short.
protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).
LEAKAGE CURRENT HOT CHECK CIRCUIT
Click on the first or last page to see other KDL-52XBR7 service manuals if exist.