Sony KDL-52S4100 Service Manual ▷ View online
57
KDL-52S4100
KDL-52S4100
4-4. SCREW LEGEND
7-685-662-29
SCREW, +BVTP2 4X14 TYPE2 SLIT
REAR COVER-20 SPEAKER-8 BOTTOM FRAME-4 BOTOM COVER-2 LCD-3 LED-4
41
7-682-973-49
SCREW, +PSW M5X16
REAR COVER-5 TABLE-TOP STAND-4
9
7-682-973-09
SCREW, +PSW M5X8
AC-BRACKET-1 BOTTOM VESA-4 EARTH WIRE-1 TOP VESA-2 CENTER FRAME-2 SPINE-10
20
7-685-646-79
SCREW, +BVTP 3X8 TYPE2 IT-3
REAR TERMINAL-2 IR-1
3
4-382-854-01
SCREW, +PSW M3X8
REAR TERMINAL-2 G-8 A-9 SIDE BRACKET-1 MAIN BRACKET-5 MAIN SHIELD-8 G-SUPPORT2 G FRAME-2
35
3-682-691-21
NUT, WASHER HEXAGON
TUNER-1
1
7-682-245-09
SCREW, +K M3X4
AC INLET-2 TUNER-1
3
4-635-303-01
SCREW, FH 3X4
SIDE BRACKET-1 MAIN SHIELD-1
2
4-635-966-21
SCREW (HEX)
TERMINAL-2
2
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
KDL-52S4100
KDL-52S4100
58
Sony Corporation
Sony Technology Center
Technical Services
Service Promotion Department
9-883-808-02
English
2008JJ74WEB-1
Printed in USA
© 2008.10
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
NOTE: Les composants identifi es per un trame et
une marque
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
numero specifi e.
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
ACCESSORIES AND PACKING
*
4-123-412-01
BAG, PROTECTION
*
4-121-065-01
CARTON, INDIVIDUAL (52)
*
4-121-070-01
CUSHION, BOTTOM L (52)
*
4-121-071-01
CUSHION, BOTTOM M (52)
*
4-121-069-01
CUSHION, BOTTOM R (52)
*
4-121-067-01
CUSHION, UPPER L (52)
*
4-121-068-01
CUSHION, UPPER M (52)
*
4-121-066-01
CUSHION, UPPER R (52)
3-870-416-41
GUIDE, QUICK SET UP (ENGLISH VERSION)
3-870-416-22
GUIDE, QUICK SET UP (FRENCH VERSION)
3-870-414-41
MANUAL, INSTRUCTION (ENGLISH VERSION)
3-870-414-23
MANUAL, INSTRUCTION (FRENCH VERSION)
3-870-415-21
MANUAL, INSTRUCTION (WALL MO)
!
1-824-964-13
POWER-SUPPLY CORD SET (U/C)
*
4-121-073-01
TRAY(52)
MISCELLANEOUS
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets.
X-2186-602-1
SUPPORT BELT KIT
REMOTE COMMANDER
1-480-722-12
REMOTE COMMANDER (RM-YD025)
9-885-110-88
COVER, BATTERY (for RM-YD025)
A-1
KDL-52S4100
KDL-52S4100
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KDL-52S4100
KDL-52S4100
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.