DOWNLOAD Sony KDL-46XBR9 / KDL-52XBR9 Service Manual ↓ Size: 16.98 MB | Pages: 88 in PDF or view online for FREE

1   Lift Top Stay Clamp, then push and slide Top Stay out from Front Cabinet Assembly (KDL-46XBR9 Only)

2   Rotate VESA Brackets counterclockwise and remove from Front Cabinet Assembly 

3   Remove 1 screw from AC Inlet

4   Remove 1 screw from AC Inlet Bracket

5   Remove 1 screw from Bottom Frame (KDL-46XBR9 Only)

 

Remove 3 screws from Bottom Frame (KDL-52XBR9 Only)

4 Screw, 

+PSW M5X12

5

Screw,

+PSW M5X12

3 +KTT 3X10

(S TYPE)

Bottom Frame

VESA Bracket

AC Inlet Bracket

AC Inlet

Top Stay

Top Stay

Clamp

Front Cabinet
Assembly

LCD Panel

1

2

Soft Cloth

1   Remove 1 screw from Tweeter (L)

2   Slide out both Loudspeakers from Front Cabinet Assembly 

3   Remove 1 screw from Tweeter (R)

2

1

Screw,

+PSW M3X8

Speaker (R)

Speaker (L)

Tweeter (L)

3 Screw,

+PSW M3X8

Tweeter (R)

Front Cabinet Assembly

Soft Cloth

1   Remove LVDS cable and holder from TCON and LCD panel

2   Remove 5 screws and release LCD panel from Front Cabinet Assembly (KDL-46XBR9 Only)

 

Remove 6 screws and release LCD panel from Front Cabinet Assembly (KDL-52XBR9 Only)

3   Disconnect 1 connector from HL5 Board and release from Front Cabinet Assembly

4   Disconnect 1 connector from Illumination Module and remove from Front Cabinet Assembly

5   Remove 4 screws and detach 2 Heat Sinks from LCD Panel

6   Gently remove Radiation Sheets

7   Carefully peel off Insulating Sheets from LCD Panel 

 

NOTE: Heat Sink, Radiation Sheet and Insulating Sheet are not included with the LCD Panel and must be replaced when 
replacing the LCD panel. For part number information, refer to the Exploded View Section of this manual.

Insulating 
Sheet (D)

Insulating Sheet (G)

LCD Panel

Front Cabinet

Assembly

Illumination 
Module

HL5

Radiation

Sheet

6

4

3

7

5

Screw,

+PSW M3X8

Double Sided Tape

Insulating Sheet (D) Detail

Insulating Sheet (G) Detail

KD-46XBR9 ONLY

KD-52XBR9 ONLY

2

Screw,
+BVTP2 4X16

Soft Cloth

1

CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.

 

Clean the cabinet of the TV with a dry soft cloth.

 

Wipe the LCD screen gently with a soft cloth.

→  Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
→  If using a chemically pretreated cloth, please follow the instruction provided on the package.
→  Never use strong solvents such as a thinner, alcohol or benzine for cleaning. 
→  Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.