View Sony KDL-46XBR10 / KDL-52XBR10 Service Manual online
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
See the PC Input Signal Reference Chart on page 14.
• Design and specifications are subject to change without notice.
(inches measured diagonally)
with speaker box
Manual (1) / Quick Setup Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) /
Table-Top Stand (1) and Screws (4) / Terminal Cover (1) / Spacers (black) for Wall-Mount (4) /
Spacers (silver) and Screws (M6 × 20) for Floor Stand (4)
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualifi ed to do so.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
• Carry the TV with the adequate number of people; larger
• For best picture quality, do not expose the screen to direct
condensation. This may cause the TV to show poor picture
and/or poor color. Should this occur, allow moisture to
evaporate completely before powering the TV on.
diagrams, exploded views, and in the parts list are critical for safe
operation. Replace these components with Sony parts whose part
numbers appear as shown in this manual or in supplements published by
Sony. Circuit adjustments that are critical for safe operation are identifi ed
in this manual. Follow these procedures whenever critical components
are replaced or improper operation is suspected.
appear as shown in this manual or in supplements
published by Sony.