DOWNLOAD Sony KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual ↓ Size: 5.66 MB | Pages: 58 in PDF or view online for FREE

Model
KDL-46X4500 KDL-55X4500 (serv.man2)
Pages
58
Size
5.66 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-46x4500-kdl-55x4500-sm2.pdf
Date

Sony KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual ▷ View online

KDL-46/55X4500 (K)     6
SELF DIAGNOSIS FUNCTION
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to
reveal past problems and how often these problems occur.
DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY LED will flash a set number of times to indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
The number of standby
LED (RED) blinking
Item
2 times
Main Power Error
3 times
Power Error2
5 times
Panel Error
6 times
Backlight Error (Panel Inverter)
7 times
Panel TEMP. Error
8 times
Audio Error
9 times
Fan Error
13 times
Panel Balancer Error
DISPLAY OF STANDBY LIGHT FLASH COUNT
STOPPING THE STANDBY FLASH
Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY LED for flashing.
2 times
4 times
5 times
LED ON  0.3 sec.
LED OFF 0.3 sec.
LED OFF
2 sec. 
[ FLASH COUNT ]
Note: One flash counts is not self-diagnostic.
STANDBY LED
KDL-46/55X4500 (K)     7
SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
bring up past occurrences of failure for confirmation on the screen:
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen
After you have completed the repairs, clear the result display to “0”.
Clearing the result display
To clear the result display to “0”, press button on the remote commander sequentially as shown below when the diagnostic screen is being
displayed.
<Delection of Error Count and Error History>
Press “
8
” button   
,
   Press “
-
” button
<Delection of Panel Operation Time>
Press “
7
” button   
,
   Press “
-
” button
Quitting Self-diagnostic screen
To quit the entire self-diagnostic screen, turn off the power switch on the remote commander or the main unit.
002 POW_ERR1
005 T_CON         
006 BACKLITE      
007 PANL TEMP
008 AUD_PROT
009 FAN_ERR
013 BALANCER
SELF CHECK
12345 - 00333 - 06789
0501210811 0412311234 0311111825  00
0000000000 0000000000 0000000000  00
0000000000 0000000000 0000000000  00
0000000000 0000000000 0000000000  00
0000000000 0000000000 0000000000  00
0000000000 0000000000 0000000000  00
0000000000 0000000000 0000000000  00
Item name
The last failure time
Falure time before last
Last failure time beforehand
Error count (00-99)
Frequency of LED blinking.
Total operation time by hour (max 99999)
Boot count (max 99999)
Panel operation time by hour (max 99999)
[ SELF-DIAGNOSTIC SCREEN DISPLAY ]
KDL-46/55X4500 (K)     8
TABLE OF CONTENTS
SPECIFICATIONS .................................................... 2
SAFETY CHECK-OUT ............................................. 5
SELF DIAGNOSIS FUNCTION ................................ 6
TABLE OF CONTENTS ........................................... 8
1. DISASSEMBLY ............................................... 1-1
1-1.
KDL-46X4500 ........................................................ 1-1
1-1-1.
REAR COVER REMOVAL ............................ 1-1
1-1-2.
STAND ASSY REMOVAL ............................ 1-1
1-1-3.
H1VM BOARD REMOVAL .......................... 1-2
1-1-4.
PANEL FIN REMOVAL ................................ 1-2
1-1-5.
FAN REMOVAL ............................................. 1-3
1-1-6.
CB1 BOARD REMOVAL .............................. 1-3
1-1-7.
SP BOX (WOOFER) REMOVAL .................. 1-4
1-1-8.
UNDER COVER, SIDE JACK BRACKET
REMOVAL ...................................................... 1-4
1-1-9.
G6 BOARD REMOVAL ................................. 1-5
1-1-10. GL BOARD REMOVAL ................................. 1-5
1-1-11. FB SHIELD ASSY REMOVAL ..................... 1-6
1-1-12. AU AND FBU BOARDS REMOVAL ........... 1-6
1-1-13. AC INLET REMOVAL ................................... 1-7
1-1-14. SPEAKER BOX ASSY AND GRILLE ASSY
REMOVAL ...................................................... 1-7
1-1-15. LCD PANEL, H3VM BOARD, H4 BOARD
AND TOUCH SENSOR MODULE
REMOVAL ...................................................... 1-8
1-2.
KDL-55X4500 ........................................................ 1-9
1-2-1.
REAR COVER REMOVAL ............................ 1-9
1-2-2.
STAND ASSY REMOVAL ............................ 1-9
1-2-3.
H1VM BOARD REMOVAL ........................ 1-10
1-2-4.
PANEL FIN REMOVAL .............................. 1-10
1-2-5.
FAN REMOVAL ........................................... 1-11
1-2-6.
CB1 BOARD REMOVAL ............................ 1-11
1-2-7.
SP BOX (WOOFER) ASSY REMOVAL ..... 1-12
1-2-8.
UNDER COVER, SIDE JACK BRACKET
REMOVAL .................................................... 1-12
1-2-9.
G6 BOARD REMOVAL ............................... 1-13
1-2-10. G7 BOARD REMOVAL ............................... 1-13
1-2-11. GL BOARD REMOVAL ............................... 1-14
1-2-12. FB SHIELD ASSY REMOVAL ................... 1-14
1-2-13. AU AND FBU BOARDS REMOVAL ......... 1-15
1-2-14. AC INLET REMOVAL ................................. 1-15
1-2-15. SPEAKER BOX ASSY REMOVAL ............ 1-16
1-2-16. LC PANEL, H3VM BOARD, H4 BOARD
AND TOUCH SENSOR MODULE
REMOVAL .................................................... 1-16
2. TROUBLESHOOTING .................................... 2-1
2-1.
TRIAGE CHART ................................................... 2-1
2-2.
FLOW CHART ...................................................... 2-2
2-2-1. NO POWER (Chart B) ........................................ 2-3
2-2-2 . SET REBOOTS ................................................. 2-4
2-2-3. SELF DIAGNOSIS ............................................. 2-4
2-2-3-1. RED LED BLINKS TABLE ...................... 2-4
2-2-3-2. RED LED BLINKS (Chart C) ................... 2-5
2-2-4. AUDIO PROBLEM (Chart D) ........................... 2-9
2-2-5. VIDEO PROBLOM (Chart E) .......................... 2-10
2-2-6. NO PICTURE ................................................... 2-11
3. DIAGRAMS ..................................................... 3-1
3-1.
BLOCK DIAGRAM .............................................. 3-1
3-2.
CIRCUIT BOARDS LOCATION ......................... 3-2
(1)
KDL-46X4500 ................................................. 3-2
(2)
KDL-55X4500 ................................................. 3-2
4. EXPLODED VIEWS ........................................ 4-1
4-1.
KDL-46X4500 ........................................................ 4-2
4-1-1.
REAR COVER AND STAND ASSY ............. 4-2
4-1-2.
H1VM BOARD AND UNDER COVER ........ 4-3
4-1-3.
FAN AND WOOFER SPEAKER ................... 4-4
4-1-4.
G6, GL AND K2 BOARDS ............................. 4-5
4-1-5.
ACW, CB1 AND FBA BOARDS AND AC
INLET .............................................................. 4-6
4-1-6.
SPEAKER BOX ASSY AND GRILLE
ASSY ................................................................ 4-7
4-1-7.
LCD PANEL, H3VM BOARD AND H4
BOARD ............................................................ 4-8
4-1-8.
CONNECTOR ASSY ...................................... 4-9
4-2.
KDL-55X4500 ...................................................... 4-10
4-2-1.
REAR COVER AND STAND ASSY ........... 4-10
4-2-2.
H1VM BOARD AND UNDER COVER ...... 4-11
4-2-3.
FAN AND WOOFER SPEAKER ................. 4-12
4-2-4.
G6, G7, GL AND K2 BOARDS ................... 4-13
4-2-5.
ACW, CB1 AND FBA BOARDS AND AC
INLET ............................................................ 4-14
4-2-6.
SPEAKER BOX ASSY, GRILLE ASSY
AND ILLUMINATION MODULE .............. 4-15
4-2-7.
LCD PANEL, H3VM BOARD AND H4
BOARD .......................................................... 4-16
4-2-8.
CONNECTOR ASSY .................................... 4-17
4-3.
PACKING MATERIALS .................................... 4-18
4-3-1.
KDL-46X4500 ............................................... 4-18
4-3-2.
KDL-55X4500 ............................................... 4-19
KDL-46/55X4500 (K)     1-1
1-1. KDL-46X4500
1-1-1. REAR COVER REMOVAL
1-1-2. STAND ASSY REMOVAL
SECTION 1
DISASSEMBLY
1
 Five screws
   (+BVTP2 4X16)
3
 One screws
   (+BV 3X12)
4
 Rear cover (46Z)
1
 Eight screws
   (+BVTP2 4X16)
1
 Six screws
   (+BVTP2 4X16)
2
 Four screws
   (+PSW M5X16)
3
 Two screws
   (+PSW M5X8)
4
 Vesa frame (TOP) (46Z) assy
1
 Four screws
   (+PSW M5X16)
2
 Stand assy (L-4)
Page of 58
Display

Click on the first or last page to see other KDL-46X4500 / KDL-55X4500 (serv.man2) service manuals if exist.