DOWNLOAD Sony KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual ↓ Size: 5.66 MB | Pages: 58 in PDF or view online for FREE

Model
KDL-46X4500 KDL-55X4500 (serv.man2)
Pages
58
Size
5.66 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-46x4500-kdl-55x4500-sm2.pdf
Date

Sony KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual ▷ View online

KDL-46/55X4500 (K)     2
SPECIFICATIONS
System
Television system
NTSC: American TV standard 
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage
Analog terrestrial: 2-69 / Digital terrestrial: 2-69 
Analog Cable: 1-135 / Digital Cable: 1-135 
Input/Output jacks
VIDEO IN 1/2/3
S VIDEO (4-pin mini DIN) (VIDEO 1 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative /  
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative 
AUDIO: 500 mVrms (Typical)/ Impedance: 47 kilohms
COMPONENT IN 1/2
YP
B
P
R
 (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / P
B
: 0.7 Vp-p, 75 ohms / 
P
R
: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (Typical)/ Impedance: 47 kilohms
HDMI IN 1/2/3/4
HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p / Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 
16, 20 and 24bits, Dolby Digital
AUDIO (HDMI IN 1 only): 500 mVrms (Typical)/ Impedance: 47 kilohms
(OPTICAL)
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
Seethe PC Input Signal Reference Chart above. 
This product does not guarantee network quality or speed of 10 BASE-T/100 BASE-TX terminals.) 
DMPORT
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
Power and others
Power consumption
(measured diagonally)
(horizontal 
× vertical)
Dimensions (W 
× H × D)
 
wall-mount screw size
(mm) 
M6 (length: refer to diagram)
Mass
Supplied accessories
Remote control RM-KD009 (1) / Size AA batteries (2) / AC power cord (1) / 75-ohm coaxial cable (1) / 
Cable holder (1 attached to the Table-Top Stand) / Table-Top Stand (1: KDL-46X4500) / Operating Instructions (1) 
/ Quick Setup Guide (1) / Installing your TV for High Quality Picture (1) / Attaching the Table-Top Stand (1: KDL-
46X4500) / Screws (4: KDL-46X4500) / AC plug holder (1: KDL-70X4500)/ Warranty card (1)
Optional accessories
Connecting cables
Speaker Grill: CRU-46SG11
Wall-Mount Bracket:SU-WL500, SU-WL50B 
Connecting cables
Speaker Grill: CRU-55SG11
Wall-Mount Bracket:SU-WL500, SU-WL50B
Model
KDL-46X4500
KDL-55X4500
Panel system
LCD (Liquid Crystal Display) Panel
Speaker output
10W + 10W, 12W + 12W (Woofer) 
CABLE/ANTENNA
75-ohm external terminal for RF inputs
AUDIO OUT
500mVrms (Typical) 
DIGITAL AUDIO OUT 
Optical Digital Audio Output (PCM/Dolby Digital)
PC IN
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
PC AUDIO INPUT
Stereo mini jack, 500 mVrms (Typical)/ Impedance: 47 kilohms
LAN (10/100)
10BASE-T/100 BASE-TX Connector (connection speed may vary depending on the network environment.    
USB
Hi-Speed USB
Power requirement
220 VAC, 60 Hz 
in use
350W 
in standby
All models less than 0.7W 
Screen size 
116.8 cm (Type 46)
Woofer: 50 
× 100 mm (2)
480 W
138.8 cm (Type 55)
Display resolution 
1,920 dots 
× 1,080 lines
Speaker
Full range: 20 
× 140 mm (4)
Full range: 33 
× 100 mm (4)
Woofer: 50 
× 100 mm (2)
Tweeter: 30 mm (2) 
φ
with stand (mm) 
1,259 
× 737 × 315
1,486 
× 855 × 3561
without stand (mm) 
1,259 
× 685 × 144
1,486 
× 803 × 147
wall-mount hole pattern
(mm) 
300 
× 300
400 
× 300
with stand
38.0 kg
54.0 kg
without stand 
33.0 kg
47.5 kg
KDL-46/55X4500 (K)     3
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
* The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing. This affects Picture settings, Wide Mode
settings, and PIP function. To view PC content set Picture Mode to Custom,Wide Mode to Full, and Display Area to Full Pixel.
Resolution
Horizontal
frequency (kHz)
 
Vertical
frequency (Hz)
 
Standard
Signals
Horizontal
(Pixel)  
×
Vertical
(Line)
 
VGA
640
×
480
31.5
60
VGA
640
×
480
37.5
75
VESA
720
×
400
31.5
70
VGA-T
SVGA
800
×
600
37.9
60
VESA Guidelines
800
×
600
46.9
75
VESA
XGA
1024
×
768
48.4
60
VESA Guidelines
1024
×
768
56.5
70
VESA
1024
×
768
60.0
75
VESA
WXGA
1280
×
768
47.4
60
VESA
1280
×
768
47.8
60
VESA
1280
×
768
60.3
75
1360
×
768
47.7
60
VESA
SXGA
1280
×
1024
64.0
60
VESA
HDTV
1920
×
1080
67.5
60
CEA-861*
• This TV’s PC input does not support Sync on Green or
Composite Sync. 
• This TV’s PC VGA input does not support interlaced
signals.
• Your PC must support one of the above PC input
signals to display on the television.  
• For the best picture quality, it is recommended to use
the signals (boldfaced) in the above chart with a 60 Hz
vertical frequency. In plug and play, signals with a
60 Hz vertical frequency will be detected
automatically. (PC reboot may be necessary.)     
KDL-46/55X4500 (K)     4
CAUTION
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
!
 
SAFETY-RELATED COMPONENT
WARNING!!
Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.
WARNINGS AND CAUTIONS
SAFETY-RELATED COMPONENT
WARNING
It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
NOTE: Do  not modify the original design without obtaining
written permission from the manufacturer or you will
void the original parts and labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by
using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of
high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within
the module.
6) Disconnect the AC power when replacing the backlight (CCFL)
or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter
circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).
KDL-46/55X4500 (K)     5
SAFETY CHECK-OUT
After correcting the original service problem, perform the
following safety checks before releasing the set to the customer:
1. Check the area of your repair for unsoldered or poorly
soldered connections. Check the entire board surface for
solder splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or touching high-wattage resistors.
3. Check that all control knobs, shields, covers, ground straps,
and mounting hardware have been replaced. Be absolutely
certain that you have replaced all the insulators.
4. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
5. Look for parts which, though functioning, show obvious
signs of deterioration. Point them out to the customer and
recommend their replacement.
6. Check the line cords for cracks and abrasion. Recommend
the replacement of any such line cord to the customer.
7. Check the antenna terminals, metal trim, “metallized”
knobs, screws, and all other exposed metal parts for AC
leakage. Check leakage as described below.
Leakage Test
The AC leakage from any exposed metal part to earth ground
and from all exposed metal parts to any exposed metal part
having a return to chassis, must not exceed 0.5 mA (500
microamperes).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or
RCA WT-540A. Follow the manufacturers’ instructions to
use these instructions.
2. A battery-operated AC milliampmeter. The Data Precision
245 digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit”
indication is 0.75 V, so analog meters must have an accurate
low voltage scale.
The Simpson’s 250 and Sanwa SH-63TRD are examples of
passive VOMs that are suitable. Nearly all battery-operated
digital multimeters that have a 2 VAC range are suitable (see
Figure A).
How to Find a Good Earth Ground
A cold-water pipe is a guaranteed earth ground; the cover-plate
retaining screw on most AC outlet boxes is also at earth ground.
If the retaining screw is to be used as your earth ground, verify
that it is at ground by measuring the resistance between it and a
cold-water pipe with an ohmmeter. The reading should be zero
ohms.
If a cold-water pipe is not accessible, connect a 60- to 100-watt
trouble- light (not a neon lamp) between the hot side of the
receptacle and the retaining screw. Try both slots, if necessary,
to locate the hot side on the line; the lamp should light at normal
brilliance if the screw is at ground potential (see Figure B).
To  Exposed Metal
Parts on Set
0.15 
µ
F
Earth Ground
AC
Voltmeter
o
o
(0.75V)
Trouble Light
AC Outlet Box
Ohmmeter
Cold-water Pipe
FigureA. Using an AC voltmeter to check AC leakage.  
Figure B. Checking for earth ground.
Page of 58
Display

Sony KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual ↓ Size: 5.66 MB | Pages: 58 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony KDL-46X4500 / KDL-55X4500 (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony KDL-46X4500 / KDL-55X4500 (serv.man2) TV. Information contained in Sony KDL-46X4500 / KDL-55X4500 (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.