Sony KDL-46W705A / KDL-50W705A Service Manual ▷ View online
KDL-46W705A/50W705A 21
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and
!
mark are critical for safety.
Replace only with part number specified.
NOTE: The components identified by a red outline and a mark contain confidential
information. Specific instructions must be adhered to whenever these components are
repaired and/or replaced. (See Appendix A)
CONNECTORS
KDL-46W705A/50W705A
151
153
152
REF. NO.
PART NO.
DESCRIPTION
REF. NO.
PART NO.
DESCRIPTION
SMART CORE BLOCK
201
151
1-910-803-17
CONNECTOR ASSEMBLY 28P
(KDL-46W705A ONLY)
151
1-910-803-25
CONNECTOR ASSEMBLY 28P
(KDL-50W705A ONLY)
152
1-846-530-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-46W705A ONLY)
152
1-846-531-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-50W705A ONLY)
153
1-910-803-22
HARNESS ASSEMBLY
(KDL-46W705A ONLY)
1-910-803-26
HARNESS ASSEMBLY
(KDL-50W705A ONLY)
201
1-910-803-21
CONNECTOR ASSEMBLY 5P
KDL-46W705A/50W705A 22
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and
!
mark are critical for safety.
Replace only with part number specified.
NOTE: The components identified by a red outline and a mark contain confidential
information. Specific instructions must be adhered to whenever these components are
repaired and/or replaced. (See Appendix A)
SCREWS
4-256-393-01
SCREW, +PSW M3X6 W12
4-159-298-01
SCREW, +PSW M4X10
7-685-648-79
SCREW +BVTP 3X12 TYPE2 IT-3
2-990-421-41
SCREW (+PSW) (M3X6)
4-400-043-01
JOINT, SCREW
7-685-647-79
SCREW +BVTP 3X10 TYPE2 IT-3
4-421-427-01
SCREW, +PSW M5X16 LOCK
Rear Cover (11), AC Cover (1)
Power Supply Board (5), Main
Board (7), Switch Unit (2)
Vesa Brackets (4)
Bracket TNK Left (2), Bracket TNK
Right (2), Rear Cover (4)
Rear Cover (2),
Smart Core Block (1)
Smart Core Block (1)
Rear Cover (2),
Smart Core Block (1)
Smart Core Block (1)
Rear Cover (2)
Stand Head (5), Stand Neck (3)
Rear Cover (12), AC Cover (1)
Power Supply Board (5), Main
Board (7), Switch Unit (2)
Vesa Brackets (4)
Bracket TNK Left (2), Bracket TNK
Right (2), Rear Cover (4)
Right (2), Rear Cover (4)
Rear Cover (2)
Stand Head (5), Stand Neck (3)
P/N
DESCRIPTION
KDL-46W705A
KDL-50W705A
KDL-46W705A/50W705A 23
ACCESSORIES AND PACKAGING
PART NO.
DESCRIPTION
4-421-427-01
SCREW, +PSW M5X16 LOCK
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV
to the Wall Mount Brackets.
4-447-575-12
MANUAL, INSTRUCTION
MISCELLANEOUS
PART NO.
DESCRIPTION
7-600-031-97
TAPE (3M 1350FB-1) 15MMX66M BLK
4-449-083-01
SPACER (22) +C
4-100-136-01
SHEET (CORE), C
OPTIONAL ACCESSORIES
PART NO.
DESCRIPTION
4-414-470-01
SUPPORT BELT KIT
1-492-078-11
ONE TOUCH REMOTE CONTROL (RMF-YD002)
REMOTE COMMANDER
PART NO.
DESCRIPTION
1-491-990-21
REMOTE COMMANDER (RM-YD090)
SECTION 5 - ACCESSORIES/PART NUMBER INFORMATION
KDL-46W705A/50W705A A-1
Sony Corporation
Sony LCSC
Technical Services
Service Publications Department
9-883-513-02
English
2013DJ74WEB-1
© 2013.4
is a trademark of Sony Electronics.
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided
in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
1.
In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3. Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
defective component MUST BE DESTROYED. Boards cannot be swapped.
5.
If a Circuit Board identified with a red outline and a in the service manual is deemed to be defective:
a.
a.
and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to
Sony.
Sony.
b.
and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6.
If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a in the service manual MUST BE DESTROYED.