DOWNLOAD Sony KDL-46V4800 / KDL-52V4800 Service Manual ↓ Size: 5.8 MB | Pages: 47 in PDF or view online for FREE

RM-SD002

KDL-46V4800/52V4800

MODEL

COMMANDER

RM-SD002

RM-SD002

DEST.

Chinese

Chinese

MODEL

COMMANDER

DEST.

KDL-46/52V4800 (CH)     2

TV system

Colour system

Channel coverage

Analogue: D/K: VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ 

CATV: S01 to S03, S1 to S41, Z1 to Z39 
I: UHF: B21 to B69/ CATV: S01 to S03, S1 to S41 
B/G: VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to 
W+4, W+6 to W+84

Digital: GB20600-2006

(S VIDEO)           1 

S video input

(VIDEO)         1, 2, 3 

Video input (4-pin mini DIN)

(HD/DVD IN)         1/        2 

Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 
480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V sync negative/P

B

/C

B

: 0.7 Vp-p, 75 ohms/

P

R

/C

R

: 0.7 Vp-p, 75 ohms

(AUDIO)        1, 2, 3 

Audio input: 500 mVrms, 47 kilohms

(HDMI  IN) 1, 2, 3

Video: 1080/24p, 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 
480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits

 Analogue audio input (minijack): 500 mVrms, 47 kilohms (HDMI IN 3 only)

(PC IN)          (RGB)

PC Input (D-sub 15-pin) 
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p

 PC audio input (minijack)

(Headphones)

Headphones jack

AUDIO OUT (OPTICAL)) 

LAN

10BASE-T/100BASE-TX connector (Depending on the operating environment of the
network, connection speed may differ. 10BASE-T/100BASE-TX communication rate
and communication quality are not guaranteed for this TV.)

Standby Power Consumption**

Less than 0.20 W (20 W when “                     (Quick Start)” is set to “      ”)

Dimensions*
(w 

×

 h 

×

 d)

Mass*

*
** Specified standby power is reached after the TV finishes necessary internal processes.

Dimensions and mass are approximate values.

Panel system

Analogue: D/K, I, B/G, M
Digital: GB20600-2006

Analogue: PAL, PAL60, SECAM, NTSC3.58, NTSC4.43
Digital: MPEG-2 MP@HL, MP@ML

LCD (Liquid Crystal Display) Panel

Sound output

8.5 W + 8.5 W (as distortion of 7%)

Antenna/Cable

75 ohm external terminal for VHF/UHF

(VIDEO)

Video output

(AUDIO OUT) 

Audio output

(DIGITAL

Digital optical jack

Power Requirements

220 V AC, 50 Hz

Viewing Screen Size (diagonal)*

132 cm (52 inches)

117 cm (46 inches)

Display Resolution

1,920 pixels (horizontal) 

× 1,080 lines (vertical)

with Stand

 (mm)

1,262 

× 871 ×  347

1,120 

×  782 ×  307

without Stand

 (mm)

1,262 

×  829 ×  119

1,120 

×  742 ×  115

with Stand

 (kg)

39.0 30.0

without Stand

 (kg)

33.0 26.0

Power Consumption

293 W

282 W

DMPORT

DIGITAL MEDIA PORT

USB

USB port

KDL-46/52V4800 (CH)     3

*
**

Design and specifications are subject to change without notice.

• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency.

Viewing angle(L

0

/3)*

Definition  
(TV Line)*

analog RF

Horizontal     350, Vertical     400 TVL**

SDTV

Horizontal     450, Vertical     450 TVL**

HDTV

Horizontal     720, Vertical     720 TVL**

×

VGA

640

×

480

31.5

60

VGA

640

×

480

37.5

75

VESA

720

×

400

31.5

70

VGA-T

SVGA

800

×

600

37.9

60

VESA Guidelines

 

800

×

600

46.9

75

VESA

XGA

1024

×

768

48.4

60

VESA Guidelines

 

1024

×

768

56.5

70

VESA

1024

×

768

60.0

75

VESA

WXGA

1280

×

768

47.4

60

VESA

1280

×

768

47.8

60

VESA

1280

×

768

60.3

75

1360

×

768

47.7

60

VESA

SXGA

1280

×

1024

64.0

60

VESA

×

VGA

640

×

480

31.5

60

VGA

SVGA

800

×

600

37.9

60

VESA Guidelines

XGA

1024

×

768

48.4

60

VESA Guidelines

WXGA

1280

×

768

47.4

60

VESA

1280

×

768

47.8

60

VESA

SXGA

1280

×

1024

64.0

60

VESA

Environment Temperature

5

°C - 35°C

Humidity

20% - 80%

Air Pressure

86 kPa - 106 kPa

Luminance*

350 cd/m

2

**

Contrast*

150:1 **

Color gamut*

32 % **

Smearing time of motion picture*

20 ms **

Audio  characteristic*

Sound pressure THD in rated input     10%**

These values are required by SJ/T11343-2006 <General specification for digital television LCD displays> in normal 
temperature. 

Refer to SJ/T11348-2006 <Methods of measurement for digital television flat panel displays>.

Horizontal     85

° Vertical     80°

Horizontal     90

° Vertical     70°  

KDL-46/52V4800 (CH)     4

These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.

An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.

!

Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.

It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.

NOTE: Do  not modify the original design without obtaining

written permission from the manufacturer or you will
void the original parts and labor guarantee.

When repairing the LCD panel, be sure you are grounded by
using a wrist band.

When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of

electric shock.

2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of

high humidity for an extended period of time.

4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within

the module.

6) Disconnect the AC power when replacing the backlight (CCFL)

or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)

7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter

circuit. Damaging the wires may cause a short.

9) Protect the panel from ESD to avoid damaging the electronic

circuit (C-MOS).