Sony KDL-46V4100 Service Manual ▷ View online
33
KDL-46V4100
KDL-46V4100
SHEET CORE C (2-688-011-01 or equivl.)
QTY=8
LCD TAPE (2-688-062-01 or equivl.)
QTY=5
SLIDE CLAMP (2-650-770-11)
QTY=7
Cho-Fab TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
LVDS Cable Routing
(Continued)
(Continued)
STEP 1
STEP 2:
Install Cho-Fab (conductive)Tape.
p/n: 2-888-494-01
Install Cho-Fab (conductive)Tape.
p/n: 2-888-494-01
STEP 3:
Install Himelon Tape OVER Cho-Fab
tape. Make sure himelon is firmly placed
Over Cho-Fab Tape.
p/n: 2-661-260-01
Install Himelon Tape OVER Cho-Fab
tape. Make sure himelon is firmly placed
Over Cho-Fab Tape.
p/n: 2-661-260-01
34
KDL-46V4100
KDL-46V4100
SHEET CORE C (2-688-011-01 or equivl.)
QTY=8
LCD TAPE (2-688-062-01 or equivl.)
QTY=5
SLIDE CLAMP (2-650-770-11)
QTY=7
Cho-Fab TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
High Voltage MDF61
NOTE: The SPACER applies to 1-802-650-11 Panel ONLY
(The spacer is not needed when the panel suffix change to -12)
(The spacer is not needed when the panel suffix change to -12)
35
KDL-46V4100
KDL-46V4100
SHEET CORE C (2-688-011-01 or equivl.)
QTY=8
LCD TAPE (2-688-062-01 or equivl.)
QTY=5
SLIDE CLAMP (2-650-770-11)
QTY=7
Cho-Fab TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
INSTALLATION PROCEDURE FOR MDF-61 CONNECTOR
STEP1: ALIGN CONNECTOR
STEP2: INSTALL CONNECTOR
STEP3: PUSH DOWN ON BLACK
LOCK TAB TO SEAT CONNECTOR.
WHEN CONNECTOR IS SEATED IT
WILL “CLICK” INTO PLACE.
LOCK TAB TO SEAT CONNECTOR.
WHEN CONNECTOR IS SEATED IT
WILL “CLICK” INTO PLACE.
STEP4: PULL LOCK BLACK LOCK
TAB IN DIRECTION INDICATED ON
PWB TO LOCK CONNECTOR.
TAB IN DIRECTION INDICATED ON
PWB TO LOCK CONNECTOR.
“HRS” LOGO WILL BE VISIBLE WHEN
CONNECTOR IS PROPERLY LOCKED.
CONNECTOR IS PROPERLY LOCKED.
36
KDL-46V4100
KDL-46V4100
SHEET CORE C (2-688-011-01 or equivl.)
QTY=8
LCD TAPE (2-688-062-01 or equivl.)
QTY=5
SLIDE CLAMP (2-650-770-11)
QTY=7
Cho-Fab TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
Balancer Board HIGH VOLTAGE Wire Dressing
MDF- 61 (NEW) CONNECTOR
1-835-148-11; 395mm Length
Installation:
1.
1-835-148-11; 395mm Length
Installation:
1.
Align connector in header
2.
Push Black Button on top of Conn.
3.
Confirm Conn. “snaps” in firmly.
4.
Slide BLACK locking latch in direction printed
on the PWB silk (circled RED in photo)
on the PWB silk (circled RED in photo)
Dress H.V. cable UNDER
the Spine Frame
the Spine Frame
Click on the first or last page to see other KDL-46V4100 service manuals if exist.