Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 (serv.man2) Service Manual ▷ View online
KDL-46NX810/55NX810/55NX811/60NX810
KDL-46NX810/55NX810/55NX811/60NX810
53
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
G9B
1-474-257-11
G9B (POWER) BOARD, COMPLETE
(KDL-46NX810/55NX810/55NX811 ONLY)
Component level repair information is not available.
G10
1-474-254-11
G10 (POWER) BOARD, COMPLETE
(KDL-60NX810 ONLY)
Component level repair information is not available.
G11
1-474-255-11
G10 (POWER) BOARD, COMPLETE
(KDL-60NX810 ONLY)
Component level repair information is not available.
HLT
A-1782-538-A
HLT(STD) BOARD, MOUNTED
CAPACITOR
C002
1-112-068-11
CERAMIC CHIP
220pF
10% 50V
C004
1-100-909-11
CERAMIC CHIP
10µF
10% 6.3V
C008
1-114-130-11
CERAMIC CHIP
1µF
10% 6.3V
CONNECTOR
CN001
1-821-139-11
HEADER ASSEMBLY FOR PWB
DIODE
D001
6-503-064-01
DIODE
LNJ337W830S0
D002
6-503-082-01
DIODE
LNJ437W840S0
D003
6-503-064-01
DIODE
LNJ337W830S0
D005
6-503-068-01
DIODE
LNJ837W830S0
PHOTO COUPLER
PH002
6-600-680-01
PHOTO DIODE
BH1690FVC-TR
TRANSISTOR
Q007
6-552-407-01
TRANSISTOR
DSA500100L
Q008
6-551-690-01
TRANSISTOR
RT3N11M-TP-1
Q009
6-551-690-01
TRANSISTOR
RT3N11M-TP-1
HLT
G9B G10 G11
RESISTOR
R001
1-220-179-11
METAL CHIP
510
5%
1/16W
R002
1-208-889-11
METAL CHIP
1.2K
0.50% 1/16W
R003
1-220-179-11
METAL CHIP
510
5%
1/16W
R006
1-208-691-11
METAL CHIP
2.2K
0.50% 1/16W
R008
1-218-941-81
METAL CHIP
100
5%
1/16W
R010
1-218-955-11
METAL CHIP
1.5K
5%
1/16W
R011
1-218-937-11
METAL CHIP
47
5%
1/16W
R014
1-220-214-11
METAL CHIP
430K
5%
1/16W
R015
1-218-965-11
METAL CHIP
10K
5%
1/16W
R016
1-218-971-11
METAL CHIP
33K
5%
1/16W
R018
1-218-953-11
METAL CHIP
1K
5%
1/16W
A-1
KDL-46NX810/55NX810/55NX811/60NX810
KDL-46NX810/55NX810/55NX811/60NX810
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-349-52
English
2010HJ74WEB-1
Printed in USA
© 2010.8
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identified with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6) If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KDL-46NX810/55NX810/55NX811/60NX810
KDL-46NX810/55NX810/55NX811/60NX810
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-349-52
English
2010HJ74WEB-1
Printed in USA
© 2010.8
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identified with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6) If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KDL-46NX810/55NX810/55NX811/60NX810
KDL-46NX810/55NX810/55NX811/60NX810
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-349-52
English
2010HJ74WEB-1
Printed in USA
© 2010.8
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identified with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6) If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
