Sony KDL-46NX807 / KDL-52NX807 Service Manual ▷ View online
KDL-46NX807\52NX807
12
Components not identifi ed by a part number or
description are not stocked because they are seldom
required for routine service.
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
some delay when ordering these components.
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
A Lift up Bottom Cover to detach from Rear Cover
B Remove 4 screws from Table-Top Stand Assembly
B Remove 4 screws from Table-Top Stand Assembly
C Lift up TV set to detach from Table-Top Stand Assembly
D Gently place the TV set face down onto a soft cloth
1
X-2546-092-1
BASE (L1A) ASSEMBLY
(KDL-46NX807 ONLY)
1
X-2546-093-2
BASE (LL1A) ASSEMBLY
(KDL-52NX807 ONLY)
2
4-170-474-01
COVER, NECK (ML1 FRONT)
(KDL-46NX807 ONLY)
2
4-170-475-01
COVER, NECK (LL1 FRONT)
(KDL-52NX807 ONLY)
3
4-170-481-01
COVER, NECK (ML1 REAR)
(KDL-46NX807 ONLY)
3
4-170-482-01
COVER, NECK (LL1 REAR)
(KDL-52NX807 ONLY)
4
4-170-445-01
NECK (ML1)
(KDL-46NX807 ONLY)
4
4-170-446-01
NECK (LL1)
(KDL-52NX807 ONLY)
5
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01
SCREW, +PSW M5X16
1
4
2
3
5
B
A
C
Soft Cloth
D
KDL-46NX807\52NX807
13
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-2. REAR COVER, AC INLET AND POWER SWITCH REMOVAL
A Remove 8 screws from Rear Cover
B Remove 4 screws from Rear Cover top and bottom center
B Remove 4 screws from Rear Cover top and bottom center
C Lift up Terminal Cover to remove from Rear Cover
D Remove 1 screw from Terminal position
D Remove 1 screw from Terminal position
E Remove 1 screw from Side Jack position
F Remove 4 screws from Under Cover to detach from Bottom Frame
G Lift AC Inlet and disconnect 1 connector to remove from Under Cover
H Remove 2 screws from Vesa Brackets to detach from Panel
I Lift up Switch Unit and disconnect 1 connector to remove from Panel
51
X-2547-175-1
REAR COVER (46) ASSEMBLY
[52]
(KDL-46NX807 ONLY)
51
X-2547-177-1
REAR COVER (52) ASSEMBLY
(KDL-52NX807 ONLY)
52
4-165-758-01
REAR COVER (46)
(KDL-46NX807 ONLY)
53
4-165-763-01
COVER, BOTTOM (40, 46)
(KDL-46NX807 ONLY)
53
4-165-764-01
COVER, BOTTOM (52)
(KDL-52NX807 ONLY)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
J Slide out Power Switch and
disconnect 1 connector to remove
from Switch unit
K Lift up Button Bracket and
disconnect 1 connector to remove
from LCD Panel
NOTE: The Vesa Brackets are not
included with the LCD Panel and
must be replaced when replacing
the LCD Panel
A
C
D
E
F
G
I
J
K
H
B
52
51
53
54
55
56
58
59
60
57
54
4-185-199-01
COVER, TERMINAL
55
4-170-646-21
COVER, UNDER
(KDL-46NX807 ONLY)
55
4-170-646-31
COVER, UNDER
(KDL-52NX807 ONLY)
! 56
1-842-031-11
AC INLET (2P)
57
4-164-305-01
BRACKET, VESA T (ML)
58
4-167-684-01
BRACKET, BUTTON (GS)
59
1-798-309-11
POWER SWITCH
60
1-487-835-11
KEY CONTROL MODULE
2-580-603-01
SCREW, +PSW M4X16
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
4-159-298-01
SCREW, +PSW M4X10
4-178-167-01
SCREW, ORNAMENTAL
KDL-46NX807\52NX807
14
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-3. SPEAKER BOX ASSEMBLY, HLR BOARD, WIFI CARD, ANTENNAS,
AND LCD PANEL HOLDER REMOVAL
A Lift up right-side Speaker Box Assembly to remove from Bezel
B Remove 1 screw from Bottom Frame to detach from LCD Panel
B Remove 1 screw from Bottom Frame to detach from LCD Panel
C Remove 2 screws from Bottom Frame to detach from Bezel
D Lift up left-side Speaker Box Assembly to remove from Bezel
D Lift up left-side Speaker Box Assembly to remove from Bezel
E Remove 1 screw from Antenna to detach from Bezel bottom
F Disconnect 1 connector from HLR Board, then release the clips and lift up to
remove the LED Guide
G Remove 1 screw from Antenna to detach from Bezel side
H Remove 2 screws from WIFI Card to detach from LCD Panel
I Remove 2 screws from LCD Panel Supports to detach from Bezel
101
1-858-378-21
SP BOX ASSEMBLY (RIGHT)
102
1-858-378-11
SP BOX ASSEMBLY (LEFT)
103
1-754-692-21
ANTENNA
104
A-1744-407-A
HLR BOARD, MOUNTED
105
1-754-692-11
ANTENNA
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
106
1-487-819-11
CARD, WIRELESS LAN
107
4-165-971-01
HOLDER, PANEL (S)
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
2-345-219-11
+B IB 3X-- CM3
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
102
104
103
101
105
106
107
C
D
F
E
B
A
G
H
I
KDL-46NX807\52NX807
15
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
151
A-1773-995-A
GLASS (46PIC) ASSEMBLY
(KDL-46NX807 ONLY)
151
A-1773-996-A
GLASS (52PIC) ASSEMBLY
(KDL-52NX807 ONLY)
152
NA
LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
153
X-2547-549-1
BRACKET, SIDE JACK T ASSEMBLY
154
4-183-353-01
LABEL, COMPONENT (SIDE)
155
A-1770-322-B
BUHS BOARD, COMPLETE
NOTE: For BUHS Board replacement, please refer to section
2-2. Adjustments After Replacing the BUHS Board or the LCD Panel
NOTE: Final software is not installed on this BUHS Board. Install the update after
replacing this board using the instructions provided with the software.
156
4-172-021-01
BRACKET, TERMINAL T
157
1-474-212-11
GE2B BOARD, COMPLETE
2-580-592-01
SCREW, +PSW M3X8
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-4. GE2B (POWER) BOARD, BUHS BOARD, AND LCD PANEL REMOVAL
A Remove 5 screws from GE2B (Power) Board
B Disconnect 5 connectors from GE2B (Power) Board
B Disconnect 5 connectors from GE2B (Power) Board
C Slide Terminal Bracket to left-side to remove from BUHS Board
D Remove 8 screws from BUHS Board
D Remove 8 screws from BUHS Board
E Disconnect 5 connectors from BUHS Board
F Slide Side Jack Bracket to right-side to remove from BUHS Board
G Carefully Lift up LCD Panel to remove from Bezel
155
153
154
152
151
157
156
D
E
F
G
B
C
A
Click on the first or last page to see other KDL-46NX807 / KDL-52NX807 service manuals if exist.