Sony KDL-46HX900 / KDL-46HX903 / KDL-46HX905 / KDL-52HX900 / KDL-52HX903 / KDL-52HX905 Service Manual ▷ View online
KDL-46/52HX900,903,905(AEP/UK)
14
SEC 1. DISASSEMBLY
KDL-46HX900/903/905
KDL-46HX900/903/905
1-1. MOVIE LIST
KDL-52HX900/903/905
KDL-52HX900/903/905
KDL-46/52HX900,903,905(AEP/UK)
15
CHASSIS
SERVICE
000
CXD2813R
000
H_DET_NOSIG_CNT 1
Item name
Category name
Data
SEC 2. ADJUSTMENT
HOW TO ENTERING SERVICE MODE
1) Turn on the main power switch to place this set in standby mode.
2) Press the buttons on the remote commander as follows, and entering service mode.
2) Press the buttons on the remote commander as follows, and entering service mode.
3) Service mode display.
Note: First of all, when you enter Service Mode, you can see “Digital” service mode.
Whenever you press “OPTIONS” or “JUMP” on remote, each service mode is changed.
“Digital” -> “Chassis” -> “Sub” -> “PEM”
“Digital” -> “Chassis” -> “Sub” -> “PEM”
Press “OPTIONS”
or “JUMP” button
or “JUMP” button
DIGITAL
SERVICE
001 op
000 VERS
000 VERS
‐ ‐ ‐
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.301J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
‐‐‐.‐‐‐‐‐‐‐‐‐
‐‐‐.‐‐‐‐‐‐‐‐‐
Item number
Category number
Category number
KDL-46/52HX900,903,905(AEP/UK)
16
ADJUSTMENT
4) How to use the remote commander.
5) After entering service mode, then turn off the power switch.
<Test>+<TV>/<Display><5><Vol Up><Power>
Service mode on
<Other> / <Power off + on>
Service mode off
<Jump> / <Option>
<Mute> + <0>
<10 or 0>
<9> + <0>
<8> + <Mute> + <0>
<3>/<6>
<2>/<5>
<1>/<4>
The flow of control
Change module
Write data
Execute
Read data
Test reset
Data up / down
Category up / down
Item up / down
Function
KDL-46/52HX900,903,905(AEP/UK)
17
ADJUSTMENT
WHITE BALANCE ADJUSTMENT
Note: Please execute this adjustment if necessary.
Change Data of “PEM” service mode.
Note: Please execute this adjustment if necessary.
Change Data of “PEM” service mode.
a. Select
“010 WB_GAIN2_A”
category by pressing “2 / 5” on remote.
b. Select “000” ~ “005” item by pressing “1 / 4” on remote.
c. Change data “0 ~ 255” by pressing “3 / 6” on remote.
d. Press “0” or “10” to save data.
c. Change data “0 ~ 255” by pressing “3 / 6” on remote.
d. Press “0” or “10” to save data.
It shows red “
WRITE
”. It indicate writing is processing.
Writing process is done after a while. (takes about a couple of seconds)
PEM
SERVICE
010
WB_GAIN2_A
000
R_DRV
128
000 R_DRV 128
001 G_DRV 128
002 B_DRV 128
003 R_BKG 128
004 G_BKG 128
005 B_BKG 128
001 G_DRV 128
002 B_DRV 128
003 R_BKG 128
004 G_BKG 128
005 B_BKG 128
Click on the first or last page to see other KDL-46HX900 / KDL-46HX903 / KDL-46HX905 / KDL-52HX900 / KDL-52HX903 / KDL-52HX905 service manuals if exist.