Sony KDL-46HX850 / KDL-55HX850 Service Manual ▷ View online
KDL-46HX850/55HX850 40
SECTION 5 - UPDATES AND ADJUSTMENTS
5. Press
2
to move to the
001 DATA_BAKUP category and the 000
BU_FLASH item display.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 0
6. To change the data value of the
BU_FLASH,
press
3
to increase the data value to
1.
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 1
NOTE: If the message displays “
DATA TRANSFER NG
” the
transfer is not complete. If that occurs, repeat step 6.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 2
DATA TRANSFER NG
If successful, the data value changes to
3.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 3
DATA TRANSFER SUCCESS
7. Verify the
Data Transfer Success message displays.
8. Proceed to “Confirming the Model ID and Product ID.”
CONFIRMING THE MODEL ID AND PRODUCT ID
After completing all of the service adjustment changes, verify that the
correct Model ID and Product ID displays in the Service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
;
Copied the BU Flash Data
9. Press
JUMP
or
OPTIONS
on the Remote Commander until
the
DIGITAL menu displays.
10. If necessary, press
4
to move to the
001 OP category.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.109AAA
RF:0000
WF1.101WAA
WF:9.2.1.12.4
DF3.300W00AA
WF:0A
YM1.409W00AA
FD:0.071
M4.091C
(DM1.109AAA)
DD2.001W00AA
PK2.001W00AA
<PEM>
MID:0543A11F
PM1.000W00AA
PID:01041040
PB1.300W00AA
PNL:FQLR460LT0101
TUNER: ENABLE
PL2.102W00A2
PD1.004G00B0
11. Using the information provided in the table below, verify the Model
ID and Product ID are correct.
Model Name Destination
Panel Name
Model‐ID Product‐ID
KDL‐46HX850
CND/US
FQLR460LT0101 0543A11F 01041040
KDL‐46HX850
LA/MX
FQLR460LT0101 0443A11F 03041040
KDL‐55HX850
CND/US
FQLR550LT0101 0543A120 01041040
KDL‐55HX850
CND/US
FQLR550LT0102 0543A135 01041040
KDL‐55HX850
LA/MX
FQLR550LT0101 0443A120 03041040
KDL‐55HX850
LA/MX
FQLR550LT0102 0443A135 03041040
KDL-46HX850/55HX850 41
SECTION 5 - UPDATES AND ADJUSTMENTS
Model ID
Software Version
Panel ID
Product ID
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.109AAA
RF:0000
WF1.101WAA
WF:9.2.1.12.4
DF3.300W00AA
WF:0A
YM1.409W00AA
FD:0.071
M4.091C
(DM1.109AAA)
DD2.001W00AA
PK2.001W00AA
<PEM>
MID:0543A11F
PM1.000W00AA
PID:01041040
PB1.300W00AA
PNL:FQLR460LT0101
TUNER: ENABLE
PL2.102W00A2
PD1.004G00B0
12. Exit service mode by turning the TV power off.
13. Cycle AC Power.
13. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
14. Wait a minute while lights flash, and initial setup screen shows.
15. Proceed to “
15. Proceed to “
Resetting the Panel Operation Time
”.
RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the Self
Check screen.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
;
Copied the BU Flash Data
;
Confirmed Model ID and Product ID
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
-
POWER
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
Panel operation time
Panel operation time
4. To clear the LCD Panel operating hours after replacing the LCD
Panel, press
7
0
.
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 00000
Panel operation time
Panel operation time
5. Proceed to
“Clearing the Self Diagnosis Self Check Information”.
KDL-46HX850/55HX850 42
SECTION 5 - UPDATES AND ADJUSTMENTS
CLEARING THE SELF DIAGNOSIS SELF CHECK
INFORMATION
After resetting the panel operation time, clear the Self Check screen.
6. To clear the error history and error count
press
8
0
.
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
7. Exit Self Check by turning the TV power off.
8. Cycle AC Power.
8. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments and Channel
Memory settings to the preset factory conditions.
1. Turn the TV On by pressing
POWER
, then wait approximately
seconds.
2. While holding down the on the Remote Commander, press the
POWER
button on the side of the TV.
3. The set restarts and displays the Initial Setup screen. This may
take several minutes.
RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER
4. If necessary, press
JUMP
or
OPTIONS
to go to DIGITAL menu.
5. Press the following buttons on the Remote Commander within a
second of each other:
Press
8
MUTING
0
.
“SERVICE” changes to green RST.
RST executes the command and displays EXE.
EXE-RST displays green, then red indicating the TV is writing the
data.
KDL-46HX850/55HX850 43
SECTION 5 - UPDATES AND ADJUSTMENTS
6. When the process is complete the green SERVICE text displays
and the LED display as shown below:
TIMER
Standby
POWER
7. Cycle AC Power
(Unplug and Plug AC Cord from the AC Outlet).
The set restarts and displays the Initial Setup screen.
This may take several minutes.
Click on the first or last page to see other KDL-46HX850 / KDL-55HX850 service manuals if exist.