Sony KDL-42R500A / KDL-47R500A Service Manual ▷ View online
41
Note: Do not connect USB memory in standby mode.
Starting update
Lights up Red LED and Orange LED is flashing. (1-2min)
Finish update
Lights up Green LED again and TV is turned on.
Lights up Green LED. (no picture)
Please confirm whether it is the latest software.
Product information of setting menu.
[HOME] - [Settings] - [Set-up] - [Product Information]
APPENDIX-2
SOFTWARE UPDATE BY USB MEMORY
1. Turn on the TV.
2. Unplug the AC power code.
3. Connect the USB memory.
4. Plug the AC power cord then update starts automatically.
5. Unplug AC power cord and disconnect USB memory.
6. Plug the AC power cord then turn on the TV.
CONFIRM SOFTWARE VERSION
KDL-42/47R500A(CH)
41
Note: Do not connect USB memory in standby mode.
Starting update
Lights up Red LED and Orange LED is flashing. (1-2min)
Finish update
Lights up Green LED again and TV is turned on.
Lights up Green LED. (no picture)
Please confirm whether it is the latest software.
Product information of setting menu.
[HOME] - [Settings] - [Set-up] - [Product Information]
APPENDIX-2
SOFTWARE UPDATE BY USB MEMORY
1. Turn on the TV.
2. Unplug the AC power code.
3. Connect the USB memory.
4. Plug the AC power cord then update starts automatically.
5. Unplug AC power cord and disconnect USB memory.
6. Plug the AC power cord then turn on the TV.
CONFIRM SOFTWARE VERSION
KDL-42/47R500A(CH)
41
Note: Do not connect USB memory in standby mode.
Starting update
Lights up Red LED and Orange LED is flashing. (1-2min)
Finish update
Lights up Green LED again and TV is turned on.
Lights up Green LED. (no picture)
Please confirm whether it is the latest software.
Product information of setting menu.
[HOME] - [Settings] - [Set-up] - [Product Information]
APPENDIX-2
SOFTWARE UPDATE BY USB MEMORY
1. Turn on the TV.
2. Unplug the AC power code.
3. Connect the USB memory.
4. Plug the AC power cord then update starts automatically.
5. Unplug AC power cord and disconnect USB memory.
6. Plug the AC power cord then turn on the TV.
CONFIRM SOFTWARE VERSION
KDL-42/47R500A(CH)
41
Note: Do not connect USB memory in standby mode.
Starting update
Lights up Red LED and Orange LED is flashing. (1-2min)
Finish update
Lights up Green LED again and TV is turned on.
Lights up Green LED. (no picture)
Please confirm whether it is the latest software.
Product information of setting menu.
[HOME] - [Settings] - [Set-up] - [Product Information]
APPENDIX-2
SOFTWARE UPDATE BY USB MEMORY
1. Turn on the TV.
2. Unplug the AC power code.
3. Connect the USB memory.
4. Plug the AC power cord then update starts automatically.
5. Unplug AC power cord and disconnect USB memory.
6. Plug the AC power cord then turn on the TV.
CONFIRM SOFTWARE VERSION
KDL-42/47R500A(CH)
