Sony KDL-40Z4500 / KDL-46Z4500 / KDL-52Z4500 Service Manual ▷ View online
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.
