DOWNLOAD Sony KDL-40XBR7 Service Manual ↓ Size: 11.23 MB | Pages: 108 in PDF or view online for FREE

1   Remove 3 screws to detach Heat Sink from LCD Panel

2   Gently remove Radiation Sheet (Heat Transfer Pad)

 

CAUTION: The Heat Sink and Radiation Sheet are NOT included on LCD Panel.

 

For LCD Panel replacement you can reuse the heat sink, but you must replace the radiation sheet.

3   Remove 2 screws 

4   Disconnect 2 connectors from inverter board 

CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.

1  Clean the cabinet of the TV with a dry soft cloth.

2  Wipe the LCD screen gently with a soft cloth.

 

→ Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

 

→ If using a chemically pretreated cloth, please follow the instruction provided on the package.

 

→ Never use strong solvents such as a thinner, alcohol or benzine for cleaning. 

 

→ Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.

☛

Heat Sink

Radiation

Sheet (T)

1

2

3

4

LCD Panel

Cabinet Assembly

1   Disconnect 1 connector and remove Illumination Module from Center Cabinet

2   Release Touch Holder from Center Cabinet

3   Disconnect 1 connector and remove Touch Sensor Module from Center Cabinet

4   Carefully remove Touch Sheet from Center Cabinet

1

3

4

2

Illumination Module

Touch Holder

Touch Sensor Module

Touch Sheet

Caution: Touch Sensor Removal

 

The board has been installed and fi xed in position on the bezel by double sided tape.  Improper removal may cause damage on both 
the board and the light guide.  Do not bend or warp the board as shown on the pictures on the below.  

To remove the module,

* Hold 2 positions (or more) to minimize board distortion. 

* Use jigs (wide plates) to avoid damaging light guide while separating the module from Bezel. 

“NG”

“OK”

THE WIRE DRESSING DIAGRAMS ARE 
CURRENTLY NOT AVAILABLE.  

There are no adjustments necessary for these models. All data has 
been set for optimal viewing for our customers. The following sections 
are for informational purposes only. 

1.  TV must be in standby mode. (Power off).

2.  Press the following buttons on the Remote Commander within a 

second of each other: 

 

DISPLAY   

Channel 

5   

Volume 

+  

  TV POWER .

$6$

!-0

34"

46

TV POWER

Onscreen cursor
and select button

DISPLAY

5

VOLUME+

JUMP

 

The fi rst service menu (TV) displays.

VERS

0

SERVICE

VERSION

0

TV MICRO

DIGITAL

PROGRAM :

H08-02.21

DATA :

1.02S40

TV

PROGRAM :

1.004

DATA :

0.019-1003

BOOT :

1

BE

PROGRAM :

1.005A00LU

DATA1 :

1.006A40LU7

DATA2 :

BOOT :

1.00W00LU

Sample TV Service Menu

Use the Remote Commander to view the BE and Digital service menus 
options.

1.  To display the Service Menu that contains the Category you want to 

adjust, press JUMP  on the Remote Commander. 
(For a complete list of the service Categories refer to Service Menus)

 

NOTE: If the Service Menu display text is not completely visible, press 
the Menu HOME  button on the Remote Commander to refresh the 
display.

Ð

VERS

0

SERVICE

VERSION

0

TV MICRO

DIGITAL

PROGRAM :

H08-02.21

DATA :

1.02S40

TV

PROGRAM :

1.004

DATA :

0.019-1003

BOOT :

1

BE

PROGRAM :

1.005A00LU

DATA1 :

1.006A40LU7

DATA2 :

BOOT :

1.00W00LU

Ð

QM

0

0

SERVICE

INFO

DTV

Ð

BEM

SERVICE

BOOT: 1000W00LU

MAIN: 1005A00LU

DATA: 1006A40LU7

Ð

Sample Service Menus