Sony KDL-40X4500 / KDL-46X4500 / KDL-55X4500 Service Manual ▷ View online
- -
CAUTION
Due to changes in the caution note
for MDF-61 connector, the caution
note has been placed in Appendix-A
for MDF-61 connector, the caution
note has been placed in Appendix-A
- 5 -
SPECIFICATIONS
Television System
Channel Coverage
Colour/Video System
Analogue:
Depending on your country/region
B/G/H, D/K, L, I
Depending on your country/region
B/G/H, D/K, L, I
Digital:
Depending on model
DVB-T/DVB-C
Depending on model
DVB-T/DVB-C
Analogue: VHF : E2-E12
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
Analogue:
PAL, PAL 60(VIDEO IN), SECAM
NTSC 3.58, NTSC4.43(VIDEO IN)
PAL, PAL 60(VIDEO IN), SECAM
NTSC 3.58, NTSC4.43(VIDEO IN)
Digital:
MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC
MP/HP@L4.0
MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC
MP/HP@L4.0
Input/Output Terminals [REAR]
General Specifications
1: 21-pin Euro connector
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB.
Inputs for RGB.
Outputs of TV Video and Audio
signals.
signals.
Power Requirements
220 - 240V
Power Consumption/
Standby
(40 inches):
Approx 210W/0.2W (Home/Standard mode)
Approx 230W/0.2W (Shop/Vivid mode)
Approx 230W/0.2W (Shop/Vivid mode)
(46 inches):
Approx 270W/0.5W (Home/Standard mode)
Approx 350W/0.5W (Shop/Vivid mode)
Approx 350W/0.5W (Shop/Vivid mode)
(55 inches):
Approx 370W/0.6W (Home/Standard mode)
Approx 480W/0.6W (Shop/Vivid mode)
Approx 480W/0.6W (Shop/Vivid mode)
2: 21-pin Euro connector
(CENELEC standard)
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB.
Inputs for RGB.
Outputs of Video and Audio signals
(Selectable). SmartLink interface.
(Selectable). SmartLink interface.
Dimensions
(40 inches):
Approx 1128x655x279mm (With stand)
Approx 1128x603x125mm (Without stand)
Approx 1128x603x125mm (Without stand)
(46 inches):
Approx 1259x737x315mm (With stand)
Approx 1259x685x144mm (Without stand)
Approx 1259x685x144mm (Without stand)
(55 inches):
Approx 1486x855x356mm (With stand)
Approx 1486x803x147mm (Without stand)
Approx 1486x803x147mm (Without stand)
Weight
Approx 27.0kg (40 inches with stand)
Approx 23.5kg (40 inches without stand)
Approx 38.0kg (46 inches with stand)
Approx 33.0kg (46 inches without stand)
Approx 54.0kg (55 inches with stand)
Approx 47.5kg (55 inches without stand)
Approx 23.5kg (40 inches without stand)
Approx 38.0kg (46 inches with stand)
Approx 33.0kg (46 inches without stand)
Approx 54.0kg (55 inches with stand)
Approx 47.5kg (55 inches without stand)
Component In
Supported formats: 1080p, 1080i,
720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3 negative
sync
720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3 negative
sync
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
Audio input: Phono jacks
Other Features
High Picture & Sound Quality, Bravia Sync,
Full HD with 10bit panel, XMB,
Live Colour Creation, 2CH speaker system,
Illuminated logo, USB Input, 4 HDMI inputs,
PC input, S-Force, Digital Media Port,
Picture Frame Mode, 24P True Cinema,
PAP, PIP Freeze, Photo Map, Swivel.
Full HD with 10bit panel, XMB,
Live Colour Creation, 2CH speaker system,
Illuminated logo, USB Input, 4 HDMI inputs,
PC input, S-Force, Digital Media Port,
Picture Frame Mode, 24P True Cinema,
PAP, PIP Freeze, Photo Map, Swivel.
HDMI Inputs
Video: 1080/24p, 1080p, 1080i,
720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio: Minijack
720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio: Minijack
(HDMI IN 1 only)
PC Input
Video:15 Pin D Sub Connector
Audio: Minijack
Audio: Minijack
Sound Output
DMPORT
Digital Media Port
Right and Left speaker
2 x 10W, 2 x 12W(Woofer)
Digital Audio Out
Digital Optical Jack
LAN
10BASE-T/100BASE-TX connector
CAM
Conditional Access Module Slot
Input/Output Terminals [SIDE]
Remote control system : Infrared control
Headphone jack
Stereo mini jack
Power requirements
3V dc
2 batteries IEC designation
2 batteries IEC designation
R06 (size AA)
Audio input
Phono jacks
Video input
Phono jack
S Video input
4-pin mini DIN
USB input
USB port
HDMI input
HDMI Connector
Design and specifications are subject to change without notice.
- 6 -
CONNECTORS
21 Pin Connector (SCART)
_
_
Red input
0.7 +/- 3dB, 75 ohms, positive
_
(S signal Chroma
Connected
Not Connected (open) * at 20Hz - 20kHz
Pin No
1
2
Signal
Signal level
1
Audio output B
(right)
(right)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
2
Audio input B
(right)
(right)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
3
Audio output A
(left)
(left)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
4
Ground (audio)
5
Ground (blue)
6
Audio input A
(left)
(left)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
7
Blue input
0.7 +/- 3dB, 75 ohms positive
8
Function select
(AV control)
(AV control)
High state (9.5-12V) : Part mode
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
9
Ground (green)
10
AVlink
11
Green
Green signal : 0.7 +/- 3dB, 75 ohms,
positive
positive
12
Open
13
Ground (red)
14
Ground (blanking)
15
input)
0.3 +/- 3dB, 75 ohms, positive
16
Blanking input
(Ys signal)
(Ys signal)
High state (1-3V) Low state (0-0.4V)
Input impedence : 75 ohms
Input impedence : 75 ohms
17
Ground (video
output)
output)
18
Ground (video
input)
input)
19
Video output
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
20
Video input
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
Video input
Y (S signal)
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
21
Common ground
(plug, shield)
(plug, shield)
- -
- -
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
21
HDMI Connector
15 Pin D Sub Connector (PC)
1
Pin No
Signal Assignment
Pin No
Signal Assignment
1
TMDS Data2+
11
TMDS Clock Shield
2
TMDS Data2 Shield
12
TMDS Clock-
3
TMDS Data2-
13
CEC
4
TMDS Data1+
14
Reserved (N.C. on device)
5
TMDS Data1 Shield
15
SCL
6
TMDS Data1-
16
SDA
7
TMDS Data0+
17
DDC/CEC Ground
8
TMDS Data0 Shield
18
+5V Power
9
TMDS Data0-
19
Hot Plug Detect
10
TMDS Clock+
Pin No
Signal Assignment
Pin No
Signal Assignment
1
Red Out
9
+5V DC
2
Green Out
10
Sync Return (Ground)
3
Blue Out
11
Monitor ID0 in Display
4
Unused
12
DCC Serial Data
5
Ground
13
Horizontal Sync
6
Red Return
14
Vertical Sync
7
Green Return (Ground)
15
DCC Serial Clock
8
Blue Return (Ground)
- 7 -
EG1H SELF DIAGNOSTIC SOFTWARE
The identification of errors within the EG1H chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the
event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous
flashing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant
device number will be displayed through the LED (Series of flashes which must be counted).
event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous
flashing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant
device number will be displayed through the LED (Series of flashes which must be counted).
LED Error Codes and Descriptions
Number of LED
Flashes
Display
Error Description
02
POW ERR1
Power error (Watching 12v rail).
05
T_CON
T-CON error.
06
BACKLITE
[CCFL] Panel inverter error.
[LED] GL board error.
07
PANEL TEMP
Panel temperature abnormal detection.
08
AUD_PROT
Audio abnormal detection.
09
FAN_ERR
Fan error
10
DTT ERR
EMMA WDT - Not detected (Reboot operation).
13
BALANCER
[CCFL] Panel balancer error.
[LED-BL] SPI error(Babylon communication error).
DISPLAY OF STANDBY LIGHT FLASH COUNT
STOPPING THE STANDBY FLASH
Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY LED for flashing.
2 times
4 times
5 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
LED OFF
2 sec.
[ FLASH COUNT ]
Note: One flash count is not self-diagnostic.
STANDBY LED
Click on the first or last page to see other KDL-40X4500 / KDL-46X4500 / KDL-55X4500 service manuals if exist.