Sony KDL-40W4100 / KDL-40WL140 / KDL-46W4100 / KDL-46W4150 / KDL-46WL140 Service Manual ▷ View online
25
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140 ONLY
Combination H Boards/Speaker Harness: H3-Board routing
Keep wires from
Crossing over edge of
Bezel (pinch point)
Crossing over edge of
Bezel (pinch point)
4
3
26
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140 ONLY
Balancer Board Cable Routing
Fix 7P harness with Sheet Core C.
NOTE:
Wires are routed UNDER Spine Frame
to avoid sharp metal edge.
NOTE:
Wires are routed UNDER Spine Frame
to avoid sharp metal edge.
CAUTION:
Make sure there is sufficient
Slack on wire so there is very little
Stress on connector!
Slack on wire so there is very little
Stress on connector!
5
6
27
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140 ONLY
7P Connector Assy CAUTION
CAUTION:
Keep wires away from capacitor C6729
on IP5-Bd. (No Touch)
Use plastic Pin on Panel as guide to apply
Himelon tape Sheet Core C.
on IP5-Bd. (No Touch)
Use plastic Pin on Panel as guide to apply
Himelon tape Sheet Core C.
6
6
3
28
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140/46W4100/46W4150/46WL140
KDL-40W4100/40WL140 ONLY
LEFT Speaker Harness Dressing
Apply LCD tape (2 Places) to secure Left
Speaker wires. Dress speaker wires in
Slide Clamp as shown. No Need to apply
LCD Tape over speaker.
Speaker wires. Dress speaker wires in
Slide Clamp as shown. No Need to apply
LCD Tape over speaker.
1
4
5
2
Click on the first or last page to see other KDL-40W4100 / KDL-40WL140 / KDL-46W4100 / KDL-46W4150 / KDL-46WL140 service manuals if exist.