Sony KDL-40SL150 Service Manual ▷ View online
13
KDL-40SL150
KDL-40SL150
SECTION 1: DISASSEMBLY
1-2. SWITCH UNIT REMOVAL (CONTAINS HSW3 BOARD)
1-1. REAR COVER REMOVAL
1 Remove 18 screws from Rear Cover
2 Remove 1 screw from Side Jack position
3 Remove 1 screw from Terminal position
4 Remove 4 screws from Rear Cover
NOTE: The Rear Cover is attached to the Bezel Assembly with three small tabs.
Use caution when removing the Rear Cover not to damage these tabs.
1 Slide out Switch unit from Bezel
2 Disconnect 1 connector from HSW3 Board
1 Screw,
+BVTP2 4X16
2 Screw,
+BVTP 3X12
TYPE IT-3
TYPE IT-3
3 Screw,
+BVTP 3X12
TYPE IT-3
TYPE IT-3
4 Screw,
+PSW M4X12
Rear Cover
Bezel
Tab Inserts
Bezel
Switch Unit (Contains HSW3 Board)
1
2
14
KDL-40SL150
KDL-40SL150
1-3. BM3 BOARD AND IP1 (POWER) BOARD REMOVAL
1 Unhook Side Jack Cover from Main Bracket
2 Disconnect 5 connectors from BM3 Board
3 Remove 9 screws from BM3 Board
4 Disconnect 5 connectors from IP1 Board
5 Remove 5 screws from IP1 Board
3 Screw,
+BVST 3X6
5
Screw,
+BVST 3X6
2
1
4
Side Jack Cover
BM3 Board
IP1 (Power) Board
Main Bracket
1-4. TABLE-TOP STAND ASSEMBLY AND UNDER COVER REMOVAL
1 Gently place the TV set face down onto soft cloth
2 Remove 4 screws Table-Top Stand Assembly
3 Remove Under Cover from Bottom Frame
2 Screw,
+PSW M5X16
3
Table-Top
Stand Assembly
Under Cover
Bottom Frame
1
15
KDL-40SL150
KDL-40SL150
1-5. STRUCTURAL
PARTS
REMOVAL
1-6. LOUDSPEAKER, UNDER BAR, IR/LED REMOVAL
1 Remove 1 screw from Main Bracket and Bezel
2 Remove 4 screws from Spine (L)
3 Remove 2 screws from IP1 Frame
4 Remove 4 screws from Spine (R)
5 Remove 3 screws from Bottom Frame
1
Screw,
+BVTP 3X12
TYPE2 IT-3
3
Screw,
+BVST 3X6
4 Screw,
+PSW M4X8
2 Screw,
+PSW M4X8
Main Bracket
Spine (R)
Bottom Frame
Spine (L)
IP1 Frame
5 Screw,
+BVTP2 4X16
1 Slide out both Speakers from Bezel
2 Remove 1 screw from Under Bar
3 Disconnect 1 connector from HLR1 Board and release from LED
4 Unhook and release LED from Bezel
5 Disconnect 1 connector from HSR Board and release from IR
6 Remove 1 screw and release IR from Bezel
Speaker
Speaker
LED
IR
Under Bar
HSR Board
HLR1 Board
Bezel
1
2 Screw,
+BVTP2 4X16
6 Screw,
+BVTP 3X12
TYPE2 IT-3
TYPE2 IT-3
1
5
4
3
16
KDL-40SL150
KDL-40SL150
1-7. LCD PANEL REMOVAL AND BEZEL ASSEMBLY REMOVAL
1 Remove LVDS cable and holder from T-CON and LCD panel
2 Remove 2 screws and release LCD panel from Bezel
3 Disconnect 2 connectors from Inverter Board
4 Carefully peel off Insulating Sheet from LCD Panel
NOTE: The Insulating Sheet is not included in LCD Panel unit.
For part number information, refer to the Exploded View Section of this manual.
Bezel
LCD Panel
3
1
2 Screw,
+BVTP2 4X16
4
Double Sided Tape
Insulating Sheet (IP1)
Detail
Detail
1-7-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
Click on the first or last page to see other KDL-40SL150 service manuals if exist.