Sony KDL-40S4100 / KDL-46S4100 Service Manual ▷ View online
17
KDL-40S4100/46S4100
KDL-40S4100/46S4100
1-10. LCD PANEL REMOVAL
1 Disconnect 2 connectors (See Detaching the Inverter Connector Assembly)
2 Remove 2 screws
1-10-1. DETACHING THE INVERTER CONNECTOR ASSEMBLY
CAUTION: Follow the instructions provided to remove the Inverter Connector Assembly
Bezel
LCD Panel
1
2
- 4 -
(1) Slide the slider to
release the
slider lock
slider lock
(3) Gently pull the
(2) Press the center
lock tab to
release the lock
release the lock
Unlock
locked state
connector up
☛
18
KDL-40S4100/46S4100
KDL-40S4100/46S4100
1-10-2. ATTACHING THE INVERTER CONNECTOR ASSEMBLY
CAUTION: Follow the instructions provided to reconnect the Inverter Connector Assembly.
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
1 Clean the cabinet of the TV with a dry soft cloth.
2 Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
☛
(1) Hold the center
of the connector
(2) Press the center of
the connector to
insert it
insert it
(3) Slide the
slider to lock
the connector
the connector
Lock
CAUTION: Secure the Inverter Connector Assembly
by locking the housing in place as shown.
Not Locked
Correctly Locked
INVERTER CONNECTOR
1-10-3. CLEANING THE LCD PANEL
☛
19
KDL-40S4100/46S4100
KDL-40S4100/46S4100
1-11. BALANCER (ETC-INVERTER MT) BOARD REMOVAL
1 Remove 8 screws (KDL-40S4100 ONLY)
Remove 7 screws (KDL-46S4100 ONLY)
2 Pull out the board from Lamp Socket
1
2
Cover
Balancer Board
LCD Panel
Balancer (ETC-Inverter MT) Board
(ETC-Inverter MT) Board
WARNING
NEVER REMOVE THE
SCREWS SECURING THE
PLASTIC STRIP HOLDING
PLASTIC STRIP HOLDING
THE LAMP SOCKETS
DAMAGE TO THE
BACKLIGHT TUBES WILL
!
OCCUR!
REMOVE SCREWS
SECURING
SHIELD
SHIELD REMOVAL
BALANCER (ETC-INVERTER) BOARD REMOVAL
WARNING
NEVER REMOVE THE
SCREWS SECURING THE
PLASTIC STRIP HOLDING
PLASTIC STRIP HOLDING
THE LAMP SOCKETS
DAMAGE TO THE
BACKLIGHT TUBES WILL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement.
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
!
.
OCCUR!
END VIEW
SOCKET
20
KDL-40S4100/46S4100
KDL-40S4100/46S4100
WIRE DRESSING
OVERALL VIEW
INV
G
T-CON
H2
SP
SP
A
7P
14P
7P
3P
6P
6P
H1
4P
2P
2P
9P
6P
7P
14P
4P
H3
Click on the first or last page to see other KDL-40S4100 / KDL-46S4100 service manuals if exist.