Sony KDL-40NX720 / KDL-46NX720 / KDL-55NX720 / KDL-60NX720 (serv.man3) Service Manual ▷ View online
KDL-40/46/55/60NX720(CH)
10
When replacing the Tengo panel at service, please note the followings.
- Unpack the package of Tengo panel. (Fig.5)
- Cut protection bag at the center of the back of panel. (Fig.6)
* Please cut the protection bag carefully, the bag will be used for re-packing.
WARNINGS AND CAUTIONS
Fig.6
Fig.5
KDL-40/46/55/60NX720(CH)
11
When replacing the Tengo panel at service, please note the followings.
- Assemble TV set with the new panel. (Fig.7)
- After assembly, attach Stand Unit and stand the TV up. (Fig.8)
WARNINGS AND CAUTIONS
Fig.7
Fig.8
KDL-40/46/55/60NX720(CH)
12
When replacing the Tengo panel at service, please note the followings.
- Set the plastic bag on correct position of package and place the replaced panel on it. (Fig.9)
* Handle the panel carefully as the instruction below.
- Align the bottom side of panel with cushions on the package. (Fig.10)
* Please note that it may damage to the glass surface if you pack panel in the wrong orientation.
* Please handle with care to prevent hitting the glass of panel to package materials.
More than 200mm from the short side
WARNINGS AND CAUTIONS
Fig.10
Fig.9
KDL-40/46/55/60NX720(CH)
13
When replacing the Tengo panel at service, please note the followings.
- Tape the plastic bag on the back of panel to protect panel surface. (Fig.11)
* Please make sure the orientation of the panel again. (T-CON board side is lower.)
- Repack the panel in the original carton box.
Fig.11
Fig.12
WARNINGS AND CAUTIONS
Click on the first or last page to see other KDL-40NX720 / KDL-46NX720 / KDL-55NX720 / KDL-60NX720 (serv.man3) service manuals if exist.