Sony KDL-40NX717 / KDL-46NX717 Service Manual ▷ View online
KDL-40NX717/46NX717
28
SERVICE ADJUSTMENTS
22. Press
1
until the
001 DATA_TRANS_EXE item displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
0
23. For the
DATA_TRANS_EXE item, press
3
to increase the
data value to 1 to execute the update.
NOTE: A warning message indicating the TV cannot be
turned off displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
1
Data Value
DO NOT POWER OFF
Warning
Message
Displays
After the update is complete, the data value changes back to
0 and a message indicating the data transter was successful
displays.
24. Proceed to “Verifying the Emitter Output Level”.
2-2-5. VERIFYING THE EMITTER OUTPUT LEVEL
If necessary, the emitter LED output level can be increased or decreased.
25. Press
2
until the
009 3D category displays.
PEM
SERVICE
009
000
EMIT_STR
3D
0
Default
Data Value
26. Using the table below, press
3
to increase or press
6
to
decrease the data value.
DATA VALUE
SETTING
0
Strong (Default)
1
Weak
27. Press
MUTING then press
0
to WRITE (Save) the changes.
28. Exit Service Mode by turing the TV Power Off.
29. Proceed to “Verifying the Model and Panel Information”.
KDL-40NX717/46NX717
29
SERVICE ADJUSTMENTS
2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM. If the DIGITAL Service
Menu is not displayed, press
JUMP or OPTIONS on the
Remote Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID 86d73331
PID54b20000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
LTK400HF01
Model ID
Product ID
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name
Model ID
Product ID
Panel ID
KDL-40NX717
86d73331
54b20000
LTK400HF01
KDL-40NX717
86d73331
54b20000
LTW400HF01
KDL-46NX717
86d73332
54b20000
LTW460HJ01
5. Exit Service Mode by pressing HOME or turn the
TV power off.
6. Proceed to “Reconnecting All Cables”.
2-2-7. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
KDL-40NX717/46NX717
30
SERVICE ADJUSTMENTS
2-3. WHITE BALANCE ADJUSTMENTS
By default the White Balance Adjustments are set for optimal viewing.
If White Balance Adjustments are requested, the data is located on the
Panel Engine Micro (PEM) Service Menu.
1. TV must be in Standby Mode. (POWER Off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. The
DIGITAL Service Menu displays.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
4. Press
JUMP or OPTIONS on the Remote Commander until
the
PEM Service Menu displays.
PEM
SERVICE
000 VERSION
MAIN
BOOT
DATA
NLD
NLD DATA
QDL NVM
33
LD1.00
37
1.0018W00LA
1.002W00LA
1.017WA46LF
5. Press
2
until the
010 WB_GAIN2_A category displays.
PEM
SERVICE
010
000
WB_GAIN2_A
R_DRV
128
KDL-40NX717/46NX717
31
SERVICE ADJUSTMENTS
6. Using the table below, press
1
to select the White Balance
Adjustment item, then press
3
to increase or press
6
to
decrease the data value.
NOTE: The data value for all White Balance Adjustments
must be set between 0~255.
ITEM
NUMBER
ITEM
NAME
DEFAULT DATA VALUE
SETTING
000
R_DRV
128
001
G_DRV
128
002
B_DRV
128
003
R_BKG
128
004
G_BKG
128
005
B_BKG
128
7. After completing all White Balance Adjustments, press
MUTING then press
0
to WRITE (Save) the changes.
2-4. RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
2-4-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. If necessary, press
JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press MUTING.
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
8. Cycle AC Power (Unplug and Plug AC Cord from the AC
Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
Click on the first or last page to see other KDL-40NX717 / KDL-46NX717 service manuals if exist.