Sony KDL-40HX800 / KDL-46HX800 / KDL-55HX800 (serv.man2) Service Manual ▷ View online
KDL-40HX800/46HX800/55HX800
KDL-40HX800/46HX800/55HX800
53
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
R5517 1-218-990-81 SHORT
CHIP
R5518 1-218-990-81 SHORT
CHIP
R5519 1-218-990-81 SHORT
CHIP
R5524 1-218-983-11 METAL
CHIP
330K 5% 1/16W
R5532 1-218-941-81 METAL
CHIP
100 5% 1/16W
R5543 1-218-963-11 METAL
CHIP
6.8K 5% 1/16W
R5544 1-218-959-11 METAL
CHIP
3.3K 5% 1/16W
R5545 1-218-979-11 METAL
CHIP
150K 5% 1/16W
R5550 1-218-971-11 METAL
CHIP
33K 5% 1/16W
R5552 1-218-979-11 METAL
CHIP
150K 5% 1/16W
R5554 1-218-965-11 METAL
CHIP
10K 5% 1/16W
R5556 1-218-983-11 METAL
CHIP
330K 5% 1/16W
R5557 1-218-935-11 METAL
CHIP
33 5% 1/16W
R5559 1-218-965-11 METAL
CHIP
10K 5% 1/16W
VARISTOR
VD5500 1-802-090-21 VARISTOR,
CHIP
VD5501 1-802-090-21 VARISTOR,
CHIP
VD5503 1-802-090-21 VARISTOR,
CHIP
HTD
A-1
KDL-40HX800/46HX800/55HX800
KDL-40HX800/46HX800/55HX800
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-326-52
English
2010EJ74WEB-1
Printed in USA
© 2010.5
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
A-1
KDL-40HX800/46HX800/55HX800
KDL-40HX800/46HX800/55HX800
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-326-52
English
2010EJ74WEB-1
Printed in USA
© 2010.5
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
A-1
KDL-40HX800/46HX800/55HX800
KDL-40HX800/46HX800/55HX800
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-326-52
English
2010EJ74WEB-1
Printed in USA
© 2010.5
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved