Sony KDL-40EX725 Service Manual ▷ View online
KDL-40EX725 59
SECTION 7 - SERVICE ADJUSTMENTS
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:3D65E21F
PM1.012W00LU
PID:0F050000
PB1.000W00LU
PNL:LTU400HF0301
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
3. Press
JUMP
or
OPTIONS
on the Remote Commander
until the
VPC menu displays.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
4. Press
2
to move to the
001 DATA_BACKUP category
and the
000 BU_FLASH item.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 0
5. To change the data value of the
BU_FLASH, press
3
to increase the data value to
1.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 1
NOTE: If the message displays “
DATA TRANSFER NG
”
the transfer is not complete. If that occurs, repeat step
5
.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 2
DATA TRANSFER NG
If successful, the data value changes to
3.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 3
DATA TRANSFER SUCCESS
6. Verify the
Data Transfer Success message displays.
7. Proceed to “Confirming the Model ID and Product ID.”
KDL-40EX725 60
SECTION 7 - SERVICE ADJUSTMENTS
CONFIRMING THE MODEL ID AND PRODUCT ID
After completing all of the service adjustment changes, verify that
the correct Model ID and Product ID displays in the Service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Copied the BU Flash Data
8. Press
JUMP
or
OPTIONS
on the Remote Commander
until the
DIGITAL menu displays.
9. If necessary, press
4
to move to the
001 OP category.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:3D65E21F
PM1.012W00LU
PID:0F050000
PB1.000W00LU
PNL:LTU400HF0301
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
10. Using the information provided in the Segment Code
table below, verify the Model ID and Product ID are
correct.
Model Name
LCD Panel Code
Model ID
Product ID
KDL-40EX725 LTU400HF0301 3D65E21F 0F050000
KDL-40EX725 T400HW04 V1 3D65E220 0F050000
KDL-40EX725 LTY400HF0901 3D65E21F 0F050000
KDL-40EX725 T400HW05 V1 3D65E220 0F050000
KDL-40EX725 V400HK2-LE1 3D65E261 0F050000
KDL-40EX725 LTY400HF0902 3D65E21F 0F050000
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:3D65E21F
PM1.012W00LU
PID:0F050000
PB1.000W00LU
PNL:LTU400HF0301
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
Model ID
Software Version
Panel ID
Product ID
11. Exit service mode by pressing
HOME
and then turn the
TV power off.
12. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
13. Wait a minute while lights flash, and initial setup screen
shows.
14. Proceed to “
Resetting the Panel Operation Time
”.
KDL-40EX725 61
SECTION 7 - SERVICE ADJUSTMENTS
RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the
Self Check screen.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Copied the BU Flash Data
;
Confirmed Model ID and Product ID
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
-
POWER
* NOTE: This differs from accessing Service Adjustments Mode
(Volume +)
Panel operation time
Panel operation time
-------------- -------------- -------------- 01
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
002 MAIN_POWE
003 DC_ALERT
003 AUD_PROT
004 BALANCER
005 HFR_ERR
005 P_ID_ERR
12345-00333-06789
12345
-
00333
-
06789
-
-
-------------- -------------- -------------- 00
006 VLED
-------------- -------------- -------------- 00
005 TCON_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
006 BACKLITE
007 TEMP_ERR
010 EMITTER
-------------- -------------- -------------- 00
007 FAN_ERR
-------------- -------------- -------------- 00
012 IA
-------------- -------------- -------------- 00
SELF CHECK
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
101 VPC_WDT
-------------- -------------- -------------- 00
102 MEPS_WDT
-------------- -------------- -------------- 00
103 HOST_WDT
-------------- -------------- -------------- 00
104 STBY_WDT
-------------- -------------- -------------- 00
000 RGB_SEN
000 RESERVED
000 RESERVED
3. To clear the LCD Panel operating hours of the LCD
Panel after replacing the panel, press
7
0
.
Panel operation time
Panel operation time
-------------- -------------- -------------- 01
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
002 MAIN_POWE
003 DC_ALERT
003 AUD_PROT
004 BALANCER
005 HFR_ERR
005 P_ID_ERR
12345-00333-06789
12345
-
00333
-
00000
-
-
-------------- -------------- -------------- 00
006 VLED
-------------- -------------- -------------- 00
005 TCON_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
006 BACKLITE
007 TEMP_ERR
010 EMITTER
-------------- -------------- -------------- 00
007 FAN_ERR
-------------- -------------- -------------- 00
012 IA
-------------- -------------- -------------- 00
SELF CHECK
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
101 VPC_WDT
-------------- -------------- -------------- 00
102 MEPS_WDT
-------------- -------------- -------------- 00
103 HOST_WDT
-------------- -------------- -------------- 00
104 STBY_WDT
-------------- -------------- -------------- 00
000 RGB_SEN
000 RESERVED
000 RESERVED
4. Exit Self Check by pressing
HOME
and then turn the
TV power off.
5. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
KDL-40EX725 62
SECTION 7 - SERVICE ADJUSTMENTS
OPTIONAL ADJUSTMENTS
All Sony TVs are set for optimal viewing performance. Refer to the
following instructions if the customer requests additional adjustments.
SETTING WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service
Menu.
1. TV must be in standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel 5
Volume +
POWER
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:3D65E21F
PM1.012W00LU
PID:0F050000
PB1.000W00LU
PNL:LTU400HF0301
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
3. Press
JUMP
or
OPTIONS
on the Remote Commander
until the
VPC menu displays.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
4. Press
2
to move to 006 WB Category.
VPC
SERVICE
006
000
WB
R_DRV 128
5. To change the data value of the
R_DRV, press
3
to
increase the value or
6
to decrease the value.
NOTE: The data value must be set between the range
1 to 255.
6. Press
1
to move to the next item (
001 G_DRV).
7. To change the data value, press
3
to increase the
value or
6
to decrease the value.
8. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
9. To save the changes, press
MUTING
then press
0
.
10. To exit service mode, press
HOME
or turn the TV
power off.
Click on the first or last page to see other KDL-40EX725 service manuals if exist.