Sony KDL-40EX720 / KDL-46EX720 / KDL-55EX720 Service Manual ▷ View online
KDL-40/46/55EX720(K)
105
Because double sided tape’s strength weaken when tapes once peeled off, peel off all tapes from bezel assembly, and stick new ones (P/N: 4-281-014-01).
1.Peel off double sided tapes from Panel.
(Possibly remain on Bezel side)
3position
10x350mm t=0.4
10x350mm t=0.4
55”
60”
3position
10x385mm t=0.4
10x385mm t=0.4
<55/60 inch>
2.Stick double sided tapes
Peel off separate papers before panel puts on.
APPENDIX-2
1position
DOUBLE SIDED TAPE (PANEL 10)
10x15mm t=0.4
DOUBLE SIDED TAPE (PANEL 10)
10x15mm t=0.4
1position
DOUBLE SIDED TAPE (PANEL 10)
10x15mm t=0.4
DOUBLE SIDED TAPE (PANEL 10)
10x15mm t=0.4
KDL-40/46/55EX720(K)
106
1.Putting Panel on to bezel
(1) Put from upper side adjusting position to L/R side.
(2) Down panel on to bottom caring about fitting bezel position
ribs and panel cutout area.
While pay attention to double sided tapes, put panel on to bezel assembly as below.
3. PUTTING PANEL ON TO BEZEL
(1)Put on upper side
(2)Put down
Care about positioning rib (L&R)
<32/37/40/46/55/60 inch>
<22/24/26 inch>
Please lock Panel with hooks of Bezel.
2.Lock with hooks of Bezel / Putting on “Bracket, panel”
<32/37/40/46/55/60 inch>
<22/24/26 inch>
Put brackets and confirm fixed by hook.
APPENDIX-2
KDL-40/46/55EX720(K)
107
OK to grab
(curling area)
(curling area)
OK to grab with care
(sharp edge area)
NG to grab
(sharp edge and
easy to deform.)
(sharp edge and
easy to deform.)
CAUTION TO SHARP EDGE OF REAR COVER(55)
APPENDIX-3
KDL-40/46/55EX720(K)
107
OK to grab
(curling area)
(curling area)
OK to grab with care
(sharp edge area)
NG to grab
(sharp edge and
easy to deform.)
(sharp edge and
easy to deform.)
CAUTION TO SHARP EDGE OF REAR COVER(55)
APPENDIX-3