Sony KDL-40EX645 / KDL-46EX641 / KDL-46EX645 / KDL-50EX645 / KDL-55EX645 Service Manual ▷ View online
KDL-40EX645/46EX641/46EX645/50EX645/55EX645 4
SECTION 1 - FEATURES AND OVERVIEW
SWITCH
UNIT
H
TCON
GL5B
A
WIRELESS LAN CARD
BOARD LAYOUT FOR KDL-46EX641/46EX645 ONLY
SWITCH
UNIT
H
TCON
GE50
A
WIRELESS LAN CARD
LD BOARD
BOARD LAYOUT FOR KDL-50EX645 ONLY
SWITCH
UNIT
H
TCON
GE55
A
WIRELESS LAN CARD
BOARD LAYOUT FOR KDL-55EX645 ONLY
KDL-40EX645/46EX641/46EX645/50EX645/55EX645 5
SECTION 1 - FEATURES AND OVERVIEW
CPU: The CPU internal to the MT5396 processor controls all aspects of
the television functions. Input from the user along with monitoring of critical
circuits is also performed by this CPU.
LVDS Transmitter: Integrated into the MT5396 is a Low Voltage Differential
LVDS Transmitter: Integrated into the MT5396 is a Low Voltage Differential
Signaling (LVDS) transmitter. This circuit converts the 8-bit parallel RGB
video information into a set of high speed serial lines for noise-free
transmission to the TCON circuits located internally to the LCD panel.
POWER SUPPLY BOARD
There are 4 different Power Supply boards used in the models in this
manual. The type of board depends on the size of LCD panel. They are:
●
GL5A for the 40” models
●
GL5B for the 46” models
●
GE50 for the 50” models
●
GE55 for the 55” models
There are 3 distinct sections on the power supply:
Standby Supply: Continuously operational as long as AC power is applied,
Standby Supply: Continuously operational as long as AC power is applied,
the standby supply generates 3.3V for the circuits requiring power while the
unit is turned off. An unregulated 19V line is present to provide power to the
main relay, PFC and main power supply at turn-on.
Main Supply: Once the power supply receives a power-on command from
Main Supply: Once the power supply receives a power-on command from
the CPU on the Main Board, the main switching supply is turned on to
provide a regulated 12V source and Audio 12V.
Converter: Generates the B+ and B- voltages for the LED backlights.
Converter: Generates the B+ and B- voltages for the LED backlights.
IR BOARD
Designated as the H Board, the IR Board contains the power, standby and
timer LED’s that are located on this board along with the IR remote receiver
and light level sensor.
SWITCH UNIT
This board contains the power, channel and volume up/down and menu
buttons.
OVERALL CIRCUIT DESCRIPTION
The
“Block Diagram” on page 10
provides an overview of the AZ3FK
chassis. The following are descriptions of the boards and their functions.
MAIN BOARD
Common to all models utilizing the AZ3FK chassis, the Main Board (A
Board) contains most of the video processing circuitry along with all audio
processing. Control of the television is accomplished via a CPU embedded
within the MT5396 processor. Below is a list of the key components located
on the Main Board.
TUNER
The tuner is a combination ATSC/NTSC unit. It can receive traditional
analog NTSC signals via cable or terrestrial along with ATSC digital signals
via terrestrial (8VSB) or cable (64 or 256 QAM).
MT5396 PROCESSOR
This IC performs the majority of the necessary audio and video processing
on the Main Board.
Analog Video Input Switch: All analog video sources are selected and
Analog Video Input Switch: All analog video sources are selected and
A/D converted and scaled (if necessary) to 1920 X 1080p 60HZ resolution.
Digital Audio and Video Decoder: The MPEG2 and Digital Dolby audio
Digital Audio and Video Decoder: The MPEG2 and Digital Dolby audio
streams are received from the tuner for decompression. All video sources
which are not native 1920 X 1080p 60HZ are scaled to this resolution.
Digital audio content is output to the class D amplifier for processing and
amplification.
Audio Processing: Analog audio sources are selected and A/D converted
Audio Processing: Analog audio sources are selected and A/D converted
directly by the MT5396. The audio information is then processed digitally.
Digital audio from the tuner and HDMI sources is also input and processed.
Class D amplifier provides the drive for the speakers.
HDMI Input and Switching: The customer can select the HDMI1 through
HDMI Input and Switching: The customer can select the HDMI1 through
HDMI4 input. Each HDMI input contains a dedicated EDI NVM (not shown)
to provide display information data to any device connected via the HDMI
inputs.
KDL-40EX645/46EX641/46EX645/50EX645/55EX645 6
SECTION 1 - FEATURES AND OVERVIEW
WIRELESS LAN CARD
The wireless transmit/receive circuits are located on this board to
communicate with a wireless network.
LCD PANEL ASSEMBLY
The LCD Panel Assembly includes the LCD Panel, TCON Board and LED
Backlight system.
The LCD Panel contains the actual liquid crystals, color filters and polarizers.
The LCD Panel contains the actual liquid crystals, color filters and polarizers.
The liquid crystals are manipulated by the applied voltage to pass a specific
amount of light - from the backlight - depending on the level of voltage
applied.
The TCON performs all the control, timing, charge and discharge functions
The TCON performs all the control, timing, charge and discharge functions
driving the operation of the LCD Panel.
A new LCD Panel assembly from parts will include the following items:
A new LCD Panel assembly from parts will include the following items:
●
LCD Panel
●
TCON Board
●
LED Backlighting Components (varies)
●
LD Board (KDL-50EX645 only)
NOTE: The LD Board is not always included with the LCD Panel. Check
with the LCD Panel manual for the most update information regarding this
information.
TCON BOARD
The TCON Board communicates between the LCD Panel and the
microprocessor on the Main Board.
NOTE: The TCON Board is not available as a replacement part for all
NOTE: The TCON Board is not available as a replacement part for all
models. To determine if the TCON Board is available as a replacement
part, refer to the LCD Panels Manual.
KDL-40EX645/46EX641/46EX645/50EX645/55EX645 7
OVERVIEW
This chapter provides information regarding the Self Diagnosis feature in
our TVs.
UPDATING THE SOFTWARE
The Self Diagnosis function is designed to provide information regarding
the problem with the TV, however, there are several issues that may be
resolved by updating the TV software to the latest version. Always check
the Sony Authorized Servicer Portal at
http://www.sony.com/asp
for any
issues that are software related. Most symptoms that are correctable by
software updates involve communications issues with other devices or
minor glitches in the operation of a specific function. Below is a list of some
of the symptoms that may be corrected with a software update:
●
Fluctuations in picture brightness
●
Intermittent picture freezing or noise
●
Problems with certain inputs (especially HDMI)
●
Intermittent or distorted audio
●
Erratic remote control operation
●
TV turns on and off by itself
●
Loss of color
●
Internet connectivity
●
Certain features not working correctly
(photo or video file viewing)
SECTION 2 - TROUBLESHOOTING
Self Diagnosis
Supported model
SELF DIAGNOSIS FUNCTION
Critical voltages and circuit operations are monitored by the CPU on the
Main Board. If an error is detected the Self Diagnosis function in the TV will
force the TV to shut down by the CPU. The monitored circuit in which the
fault occurred will automatically cause the CPU to blink the Standby LED
in groups of repeating sequences. The number of times the Standby LED
blinks indicates the possible cause of the problem.
Not all of the available protect codes are used in every model. For example,
Not all of the available protect codes are used in every model. For example,
models that don’t have the local dimming feature do not use the 4X blink
error as this circuit is found in models that are backlit with fluorescent lamps.
The information in this section provides guidance in locating the possible
component causing the shutdown.
STANDBY LED BLINK COUNT
Standby LED
2 times
5 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
LED OFF 0.3 sec.
LED OFF
3 sec.
LED DISPLAY & BLINK COUNT
Click on the first or last page to see other KDL-40EX645 / KDL-46EX641 / KDL-46EX645 / KDL-50EX645 / KDL-55EX645 service manuals if exist.