Sony KDL-40EX620 / KDL-40EX621 / KDL-46EX620 / KDL-46EX621 / KDL-55EX620 / KDL-55EX621 (serv.man2) Service Manual ▷ View online
57
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
R1090
1-218-990-81
SHORT CHIP
* R1093
1-250-688-11
METAL CHIP
1M
1%
1/10W
R1105
1-218-968-11
METAL CHIP
18K
5%
1/16W
R1106
1-218-969-11
METAL CHIP
22K
5%
1/16W
R1107
1-218-961-11
METAL CHIP
4.7K
5%
1/16W
R1108
1-218-965-11
METAL CHIP
10K
5%
1/16W
R1109
1-218-961-11
METAL CHIP
4.7K
5%
1/16W
* R1110
1-250-527-11
METAL CHIP
22K
1%
1/16W
R1111
1-218-941-81
METAL CHIP
100
5%
1/16W
* R1112
1-250-527-11
METAL CHIP
22K
1%
1/16W
R1113
1-218-965-11
METAL CHIP
10K
5%
1/16W
R1114
1-218-969-11
METAL CHIP
22K
5%
1/16W
R1115
1-218-965-11
METAL CHIP
10K
5%
1/16W
R1116
1-218-965-11
METAL CHIP
10K
5%
1/16W
R1117
1-218-949-11
METAL CHIP
470
5%
1/16W
R1118
1-218-965-11
METAL CHIP
10K
5%
1/16W
* R1120
1-250-511-11
METAL CHIP
4.7K
1%
1/16W
R1121
1-218-973-11
METAL CHIP
47K
5%
1/16W
R1122
1-250-519-11
METAL CHIP
10K
1%
1/16W
R1123
1-218-965-11
METAL CHIP
10K
5%
1/16W
R1124
1-218-959-11
METAL CHIP
3.3K
5%
1/16W
R1127
1-218-975-11
METAL CHIP
68K
5%
1/16W
R1129
1-218-984-11
METAL CHIP
390K
5%
1/16W
R1130
1-218-977-11
METAL CHIP
100K
5%
1/16W
R1131
1-218-977-11
METAL CHIP
100K
5%
1/16W
R1136
1-218-978-11
METAL CHIP
120K
5%
1/16W
R1137
1-218-972-11
METAL CHIP
39K
5%
1/16W
LD
ACCESSORIES AND PACKING
3-209-297-17
BAG, PROTECTION
(KDL-40EX620/40EX621 US ONLY)
3-209-296-34
BAG, PROTECTION
(KDL-46EX620/46EX621/55EX620/55EX620 US ONLY)
X-2580-586-1
CARTON ASSY (CAS 40 US)
(KDL-40EX620 US ONLY)
X-2580-590-1
CARTON ASSY (CAS 2D 46 US)
(KDL-46EX620 US ONLY)
X-2580-576-1
CARTON ASSY (CAS 55 US)
(KDL-55EX620 US ONLY)
4-272-322-01
CARTON, INDIVIDUAL (CAS 40)
(KDL-40EX621 US ONLY)
4-272-321-01
CARTON, INDIVIDUAL (CAS 46)
(KDL-46EX621 US ONLY)
4-272-320-01
CARTON, INDIVIDUAL
(KDL-55EX621 US ONLY)
4-260-887-11
CUSHION, LOWER (SYL40)
(KDL-40EX620/40EX621 US ONLY)
4-260-890-11
CUSHION, LOWER (SYL46)
(KDL-46EX620/46EX621 US ONLY)
4-260-893-11
CUSHION, LOWER (SYL55)
(KDL-55EX620/55EX621 US ONLY)
4-269-539-11
CUSHION, SIDE CENTER L (SYL 55)
(KDL-55EX620/55EX621 US ONLY)
4-269-540-11
CUSHION, SIDE CENTER R (SYL 55)
(KDL-55EX620/55EX621 US ONLY)
4-270-472-01
CUSHION, T (BAT-V)
(KDL-55EX620/55EX621 US ONLY)
4-260-886-11
CUSHION, UPPER (SYL40)
(KDL-40EX620/40EX621 US ONLY)
4-260-889-11
CUSHION, UPPER (SYL46)
(KDL-46EX620/46EX621 US ONLY)
4-260-892-11
CUSHION, UPPER (SYL55)
(KDL-55EX620/55EX621 US ONLY)
2-291-832-12
LABEL, ENERGY GUIDE (CAS)
(KDL-40EX620/40EX621 US ONLY)
2-291-832-32
LABEL, ENERGY GUIDE (CAS)
(KDL-46EX620/46EX621 US ONLY)
2-291-832-52
LABEL, ENERGY GUIDE (CAS)
(KDL-55EX620/55EX621 US ONLY)
3-674-673-11
STOPPER (A)
(KDL-55EX620/55EX621 US ONLY)
4-268-385-11
TRAY (SYL55-2P)
(KDL-55EX620/55EX621 US ONLY)
A-1
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-391-52
English
2011BJ74WEB-1
Printed in USA
© 2011.2
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identified with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6) If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-391-52
English
2011BJ74WEB-1
Printed in USA
© 2011.2
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identified with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6) If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
KDL-40EX620/40EX621/46EX620/46EX621/55EX620/55EX621
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-391-52
English
2011BJ74WEB-1
Printed in USA
© 2011.2
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identified with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6) If a unit is destroyed (such as field scrap), the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
