Sony KDL-40BX450 / KDL-40BX451 / KDL-40EX640 / KDL-46BX450 / KDL-46BX451 / KDL-46EX640 / KDL-55EX640 Service Manual ▷ View online
AZ3FK 41
AZ3FK
REF. NO.
PART NO.
DESCRIPTION
VALUES
When ordering parts by reference
number, please include the board name.
REF. NO.
PART NO.
DESCRIPTION
VALUES
NOTE: The components identified by shading
and
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to
whenever these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this
manual.
whenever these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this
manual.
AFTER REPLACING THE MAIN BOARD OR LCD PANEL YOU MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND COMPLETE ANY SERVICE ADJUSTMENTS
*
Items marked with an asterisk are not stocked since they are seldom
required for routine service. Expect some delay when ordering these
components.
components.
RESISTORS
• All resistors are in ohms
• All resistors are in ohms
• F : nonflammable
• All variable and adjustable resistors have
characteristic curve B, unless otherwise noted.
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
SECTION 2: ELECTRICAL PARTS LIST
G11
1-474-382-12
G11 BOARD COMPLETE
(KDL-46BX450 ONLY)
H
1-895-183-11 H BOARD, MOUNTED
KDL-40BX451/46BX451
A
1-895-182-31 A BOARD, COMPLETE
G10
1-474-380-11 G10 BOARD, COMPLETE
(KDL-40BX450 ONLY)
G11
1-474-382-12
G11 BOARD COMPLETE
(KDL-46BX451 ONLY)
H
1-895-183-11 H BOARD, MOUNTED
KDL-40BX453/46BX453
A
1-895-182-61 A BOARD, COMPLETE
G10
1-474-380-11 G10 BOARD, COMPLETE
(KDL-40BX453 ONLY)
G11
1-474-380-12 G11 BOARD, COMPLETE
(KDL-46BX453 ONLY)
H
1-895-183-11 H BOARD, MOUNTED
KDL-32BX353/32BX354
A
1-895-182-41 A BOARD, COMPLETE
(KDL-32BX353 ONLY)
1-895-182-51 A BOARD, COMPLETE
(KDL-32BX354 ONLY)
G9
1-474-381-12 G9 BOARD, COMPLETE
H
1-895-183-11 H BOARD, MOUNTED
KDL-32BX355/32BX356
A
1-895-184-21 A BOARD, COMPLETE
(KDL-32BX355 ONLY)
1-895-184-31 A BOARD, COMPLETE
(KDL-32BX356 ONLY)
G9
1-474-381-12 G9 BOARD, COMPLETE
H
1-895-183-11 H BOARD, MOUNTED
KDL-40BX450/46BX450
A
1-895-182-11 A BOARD, COMPLETE
(FOR CND/MX/US MODELS ONLY)
1-895-182-21 A BOARD, COMPLETE
(FOR LA MODELS ONLY)
G10
1-474-380-11 G10 BOARD, COMPLETE
(KDL-40BX450 ONLY)
AZ3FK 42
AZ3FK
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
AFTER REPLACING THE MAIN BOARD OR LCD PANEL YOU MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND COMPLETE ANY SERVICE ADJUSTMENTS
KDL-40BX455/46BX455
A
1-895-184-11 A BOARD, COMPLETE
G10
1-474-380-11 G10 BOARD, COMPLETE
(KDL-40BX455 ONLY)
G11
1-474-380-12 G11 BOARD, COMPLETE
(KDL-46BX455 ONLY)
H
1-895-183-11 H BOARD, MOUNTED
KDL-40EX640/46EX640/55EX640
A
1-895-172-11 A BOARD, COMPLETE
GL5
1-895-173-11 GL5A BOARD, COMPLETE
(KDL-40EX640 ONLY)
1-895-174-11
GL5B BOARD COMPLETE
(KDL-46EX640 ONLY)
GE55
1-895-175-11 GE55 BOARD, COMPLETE
(KDL-55EX640 ONLY)
H
1-895-176-11 H BOARD, MOUNTED
ACCESSORIES AND PACKING FOR US ONLY
4-408-075-31
BAG, PROTECTION (1400x900)
(KDL-40BX450/40EX640 ONLY)
4-408-076-31
BAG, PROTECTION (1550x1050)
(KDL-46BX450/46EX640 ONLY)
4-408-077-31
BAG,PROTECTION (1720X1200)
(KDL-55EX640 ONLY)
4-416-841-01
CARTON, INDIVIDUAL (APO 40)
(KDL-40BX450 ONLY)
4-416-845-01
CARTON, INDIVIDUAL (APO 46)
(KDL-46BX450 ONLY)
4-419-122-01
CARTON, INDIVIDUAL (NK2 40)
(KDL-40EX640 ONLY)
4-419-123-01
CARTON, INDIVIDUAL (NK2 46)
(KDL-46EX640 ONLY)
4-423-892-01
CUSHION, LOWER (40APOF)
(KDL-40BX450 ONLY)
4-400-053-11
CUSHION, LOWER (40 ZEU)
(KDL-40EX640 ONLY)
4-423-894-01
CUSHION, LOWER (46APOF)
(KDL-46BX450 ONLY)
4-400-054-11
CUSHION, LOWER (46 ZEU)
(KDL-46EX640 ONLY)
4-400-055-12
CUSHION, LOWER (55 ZEU)
(KDL-55EX640 ONLY)
4-412-149-11
CUSHION, SIDE CENTER L (55 ZEU)
(KDL-55EX640 ONLY)
4-412-150-11
CUSHION, SIDE CENTER R (55 ZEU)
(KDL-55EX640 ONLY)
4-423-891-01
CUSHION, UPPER (40APOF)
(KDL-40BX450 ONLY)
4-400-047-11
CUSHION, UPPER (40 ZEU)
(KDL-40EX640 ONLY)
4-423-893-01
CUSHION, UPPER (46APOF)
(KDL-46BX450 ONLY)
4-400-048-11
CUSHION, UPPER (46 ZEU)
(KDL-46EX640 ONLY)
4-400-049-11
CUSHION, UPPER (55 ZEU)
(KDL-55EX640 ONLY)
4-419-434-11
LABEL, ENERGY GUIDE(APO)
(KDL-40BX450 ONLY)
4-420-093-01
LABEL, ENERGY GUIDE(NK2)
(KDL-40EX640 ONLY)
4-419-434-21
LABEL, ENERGY GUIDE(APO)
(KDL-46BX450 ONLY)
4-420-093-11
LABEL, ENERGY GUIDE(NK2)
(KDL-46EX640 ONLY)
4-420-093-21
LABEL, ENERGY GUIDE(NK2)
(KDL-55EX640 ONLY)
4-419-125-01
LABEL, FRONT (NK2 40)
(KDL-40EX640
ONLY)
4-419-126-01
LABEL, FRONT (NK2 46)
(KDL-46EX640
ONLY)
4-419-127-01
LABEL, FRONT (NK2 55)
(KDL-55EX640 ONLY)
3-674-673-22
STOPPER (A)
(KDL-55EX640
ONLY)
4-400-062-11
TRAY (55 ZEU)
(KDL-55EX640
ONLY)
AZ3FK
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-883-884-53
English
2012BJ74WEB-1
Printed in USA
© 2012.2
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
AZ3FK A-1
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
1. In the service manual the Circuit Board(s. containing encryption key components
shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3. Disassembly, decryption, or reverse-engineering component(s. is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b. and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap., the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
AZ3FK
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-883-884-53
English
2012BJ74WEB-1
Printed in USA
© 2012.2
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
AZ3FK A-1
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
Board containing encryption key components is repaired and/or replaced pursuant to
the following:
1. In the service manual the Circuit Board(s. containing encryption key components
shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3. Disassembly, decryption, or reverse-engineering component(s. is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed
to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modified board MUST BE RETURNED to Sony.
b. and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap., the Circuit Board identified with a
red outline and a in the service manual MUST BE DESTROYED.
