DOWNLOAD Sony KDL-39R475A / KDL-42R474A / KDL-42R475A / KDL-46R475A Service Manual ↓ Size: 3 MB | Pages: 30 in PDF or view online for FREE

KDL-39R475A/42R474A/42R475A/46R475A 25

 

 

4-466-880-01 

SCREW, M5X18 SW (IRST)

 

 

 

(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)  

  

 

For product protection and safety reasons, Sony strongly recommends 

 

 

 

that you use the screws provided with the TV.  

 

 

 

CAUTION: These screws cannot be used to secure the TV  

 

 

 

to the Wall Mount Brackets.

 

 

4-456-413-41 

GUIDE, QUICK SET UP

 

 

4-456-411-41 

MANUAL, INSTRUCTION

 

 

4-459-244-21 

LABEL, INFORMATION

 

 

 

(KDL-39R475A ONLY)

 

 

4-459-244-51 

LABEL, INFORMATION

 

 

 

(KDL-42R474A ONLY)

 

 

4-459-244-11 

LABEL, INFORMATION

 

 

 

(KDL-42R475A ONLY)

 

 

4-459-244-01 

LABEL, INFORMATION

 

 

 

(KDL-46R475A ONLY)

 

 

4-465-018-01 

SHIELD, AL (FANT)

 

 

4-414-470-01 

SUPPORT BELT KIT

 

 

1-492-066-21 

REMOTE COMMANDER (RM-YD093)

KDL-40R450A/46R450A A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 

in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 

pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2. 

Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3. 

Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5.  If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:

a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 

Sony.

b.  and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6.  If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 

KDL-40R450A/46R450A A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 

in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 

pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2. 

Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3. 

Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5.  If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:

a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 

Sony.

b.  and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6.  If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 

KDL-40R450A/46R450A A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 

in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 

pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2. 

Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3. 

Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5.  If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:

a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 

Sony.

b.  and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6.  If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED.