Sony KDL-32W5500 / KDL-40W5500 / KDL-40WE5 Service Manual ▷ View online
KDL-32/40W5500, 40WE5 (WB) 1-11
PUSH
PULL
UP
UP
[ PUSH POINT ]
C. LIft up the rear cover from bottom.
A. Photo show the position during
rear cover opening.
rear cover opening.
B. Push tewards inner set while remove
rear cover from switch unit.
rear cover from switch unit.
< TOP SIDE >
[ CLICK ]
< RIGHT SIDE >
1
2
3
4
CLICKING POSITION
(push from rear cover to bezel)
(push from rear cover to bezel)
1. For easier installation at top side,
click the rear cover from side to center.
2. Push the rear cover at 4 positions until
click sound come out.
3. 3 position at top side and 1 position at
right side (near switch unit).
click the rear cover from side to center.
2. Push the rear cover at 4 positions until
click sound come out.
3. 3 position at top side and 1 position at
right side (near switch unit).
Note: Please make sure rear cover
not overlap with bezel.
not overlap with bezel.
[REMOVAL AND INSTALLATION OF REAR COVER PROCEDURE]
• REMOVAL
• INSTALLATION
KDL-32/40W5500, 40WE5 (WB) 1-12E
[REMOVAL OF SWITCH UNIT PROCEDURE]
Push this position to remove
switch unit more easily.
switch unit more easily.
Push and slant towards
inner side of set.
inner side of set.
Push and slant towards inner side of set to remove switch unit correctly.
KDL-32/40W5500, 40WE5 (WB) 2-1
SECTION 2
TROUBLESHOOTING
2-1. TRIAGE CHART
Reference
2 Blimks
5 Blimks
6 Blimks
7 Blimks
8 Blimks
10 Blimks
12 Blimks
13 Blimks
14 Blimks
No power
No Video
BL OK
OSD OK
No Video
No BL
No Video
BL OK
No OSD
No Tuner
Video OK
Tuner OK
Video 1-3
Video 1-3
Bad
No HDMI
No Audio
BA Board
G2CE Board
IP1 Board
IP3N Board
T-con Board
Speaker unit
Panel Module
LVDS cable
Joint connector
Problem
G2CE Board
IP1 Board
IP3N Board
T-con Board
Speaker unit
Panel Module
LVDS cable
Joint connector
Problem
Low B+
Low B+
BL
Temp
Audio
Digital
T-con
Balance
T-con
Floechart
A
A
D
A
B
A
D
A
D
A
C
A
C
C
C
C
B
Video distored or missing
Symptom (dead set)
KDL-32/40W5500, 40WE5 (WB) 2-2
2-2. FLOWCHART
2-2-1. FLOWCHART A
2,5,7,10,13 blink/
No VIDEO/No BL/
No POWER
88-132VAC
inlet on G2CE
or IP1 or IP3N
3.3V_DC
CN1300 3pin on
BA board
Does power
button work?
button work?
BA board
Yes
AC cable or AC inlet
Switch unit
No
No
No
G2CE or IP1 or IP3N
(No STBY 3.3V)
Yes
Yes
Click on the first or last page to see other KDL-32W5500 / KDL-40W5500 / KDL-40WE5 service manuals if exist.