Sony KDL-32W4000 / KDL-32W4210 / KDL-32W4220 / KDL-40W4000 / KDL-40W4210 / KDL-40W4220 / KDL-40W4230 / KDL-46W4000 / KDL-46W4210 / KDL-46W4220 / KDL-46W4230 / KDL-52W4000 / KDL-52W4210 Service Manual ▷ View online
- -
CAUTION
Due to changes in the caution note
for MDF-61 connector, the caution
note has been placed in Appendix-A
for MDF-61 connector, the caution
note has been placed in Appendix-A
- 5 -
EG1L
RM-ED011
SPECIFICATIONS
Television System
Channel Coverage
Colour/Video System
Analogue:
Depending on your country/region
B/G/H, D/K, L, I
Depending on your country/region
B/G/H, D/K, L, I
Digital:
Depending on model
DVB-T/DVB-C
Depending on model
DVB-T/DVB-C
Analogue: VHF : E2-E12
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
Analogue:
PAL, SECAM
NTSC 3.58/4.43
(VIDEO IN)
PAL, SECAM
NTSC 3.58/4.43
(VIDEO IN)
Digital:
MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC
HP@L4.0, MP@L3.0
MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC
HP@L4.0, MP@L3.0
Ver 3.0
Picture Size
LCD(Liquid Crystal Display) Panel
Approx 81.3cm (32 inches)
Approx 101.6cm (40 inches)
Approx 116.8cm (46 inches)
Approx 132.1cm (52 inches)
Approx 101.6cm (40 inches)
Approx 116.8cm (46 inches)
Approx 132.1cm (52 inches)
Sound Output
Right and Left speaker
2 x 10W (RMS)
Input/Output Terminals [REAR]
General Specifications
1: 21-pin Euro connector
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB.
Inputs for RGB.
Outputs of TV Video and Audio
signals.
signals.
Power Requirements
220 - 240V
Power Consumption/
Standby
120W/0.19W (Home/Standard mode) (32")
143W/0.19W (Shop/Vivid mode) (32")
176W/0.19W (Home/Standard mode) (40")
143W/0.19W (Shop/Vivid mode) (32")
176W/0.19W (Home/Standard mode) (40")
201W/0.19W (Shop/Vivid mode) (40")
225W/0.19W (Home/Standard mode) (46")
243W/0.19W (Shop/Vivid mode) (46")
223W/0.19W (Home/Standard mode) (52")
253W/0.19W (Shop/Vivid mode) (52")
225W/0.19W (Home/Standard mode) (46")
243W/0.19W (Shop/Vivid mode) (46")
223W/0.19W (Home/Standard mode) (52")
253W/0.19W (Shop/Vivid mode) (52")
2: 21-pin Euro connector
(CENELEC standard)
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB and S Video.
Inputs for RGB and S Video.
Outputs of Video and Audio signals
(Selectable). SmartLink interface.
(Selectable). SmartLink interface.
Dimensions
794x577x242mm (32" with stand)
794x540x99mm (32" without stand)
986x684x279mm (40" with stand)
986x646x110mm (40" without stand)
794x540x99mm (32" without stand)
986x684x279mm (40" with stand)
986x646x110mm (40" without stand)
1120x782x307mm (46" with stand)
1120x742x115mm (46" without stand)
1262x871x347mm (52" with stand)
1262x829x119mm (52" without stand)
1120x742x115mm (46" without stand)
1262x871x347mm (52" with stand)
1262x829x119mm (52" without stand)
Weight
Approx 15.5kg (32" with stand)
Approx 13.0kg (32" without stand)
Approx 21.5kg (40" with stand)
Approx 18.5kg (40" without stand)
Approx 29.0kg (46" with stand)
Approx 25.0kg (46" without stand)
Approx 38.0kg (52" with stand)
Approx 32.0kg (52" without stand)
Approx 13.0kg (32" without stand)
Approx 21.5kg (40" with stand)
Approx 18.5kg (40" without stand)
Approx 29.0kg (46" with stand)
Approx 25.0kg (46" without stand)
Approx 38.0kg (52" with stand)
Approx 32.0kg (52" without stand)
Component In
Supported formats:1080/24p,
1080p, 1080i, 720p, 576p, 576i,
480p, 480i
Y:1 Vp-p, 75 ohms, 0.3V negative
sync
Y:1 Vp-p, 75 ohms, 0.3V negative
sync
PB/CB:0.7 Vp-p, 75 ohms
PR/CR:0.7 Vp-p, 75 ohms
PR/CR:0.7 Vp-p, 75 ohms
Audio input:Phono jacks
Supplied Accessories
RM-ED011 Remote Commander (1)
IEC designated R06 battery (2)
Mains lead (Type BF) (1)
IEC designated R06 battery (2)
Mains lead (Type BF) (1)
Coaxial cable (1)
Support belt (1) and screws (2)
Support belt (1) and screws (2)
HDMI Inputs
Video:1080/24p, 1080p, 1080i,
720p, 576p, 576i, 480p, 480i
Audio:Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio input:500mVrms,
47Kohms (HDMI IN 2 only)
720p, 576p, 576i, 480p, 480i
Audio:Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio input:500mVrms,
47Kohms (HDMI IN 2 only)
Other Features
High Picture Quality, Intergrated digital TV Tuner,
HFD 1920x1080, Dynamic Contrast,
BBE digtal,Dolby Virtual Surround, XMB,
USB Input, 3 HDMI inputs, PC input.
HFD 1920x1080, Dynamic Contrast,
BBE digtal,Dolby Virtual Surround, XMB,
USB Input, 3 HDMI inputs, PC input.
PC Input
Video:15 Pin D Sub Connector
Audio:Minijack
Audio:Minijack
Digital Out
Digital Optical Jack
Audio Output:Phono jacks
CAM
Conditional Access Module
Input/Output Terminals [SIDE]
Remote control system : Infrared control
Headphone jack
Stereo mini jack
Power requirements
3V dc
2 batteries IEC designation
2 batteries IEC designation
R06 (size AA)
Audio input
Phono jacks
Video input
Phono jack
USB input
USB port
HDMI input
HDMI Connector
Design and specifications are subject to change without notice.
- 6 -
EG1L
RM-ED011
CONNECTORS
21 Pin Connector (SCART)
_
_
Red input
0.7 +/- 3dB, 75 ohms, positive
_
(S signal Chroma
Connected
Not Connected (open) * at 20Hz - 20kHz
Pin No
1
2
Signal
Signal level
1
Audio output B
(right)
(right)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
2
Audio input B
(right)
(right)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
3
Audio output A
(left)
(left)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
4
Ground (audio)
5
Ground (blue)
6
Audio input A
(left)
(left)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
7
Blue input
0.7 +/- 3dB, 75 ohms positive
8
Function select
(AV control)
(AV control)
High state (9.5-12V) : Part mode
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
9
Ground (green)
10
AVlink
11
Green
Green signal : 0.7 +/- 3dB, 75 ohms,
positive
positive
12
Open
13
Ground (red)
14
Ground (blanking)
15
input)
0.3 +/- 3dB, 75 ohms, positive
16
Blanking input
(Ys signal)
(Ys signal)
High state (1-3V) Low state (0-0.4V)
Input impedence : 75 ohms
Input impedence : 75 ohms
17
Ground (video
output)
output)
18
Ground (video
input)
input)
19
Video output
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
20
Video input
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
Video input
Y (S signal)
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
21
Common ground
(plug, shield)
(plug, shield)
- -
- -
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
21
How to replace the fuse.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
FUSE
WARNING (UK Models only)
The flexible mains lead is supplied connected to a B.S. 1363 fused
plug having a fuse of the correct rating for the set. Should the fuse
need to be replaced, use a fuse of the same rating approved by ASTA
to BS 1362, ie one that carries the
plug having a fuse of the correct rating for the set. Should the fuse
need to be replaced, use a fuse of the same rating approved by ASTA
to BS 1362, ie one that carries the
ASA
T
mark.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUITABLE
FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT
OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED
FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH
BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE SOCKET.
FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT
OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED
FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH
BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE SOCKET.
When an alternative type of plug is used, it should be fitted with the
correct rating fuse, otherwise the circuit should be protected by the
same rating fuse at the distribution board.
correct rating fuse, otherwise the circuit should be protected by the
same rating fuse at the distribution board.
UK PLUG WARNING
- 7 -
EG1L
RM-ED011
HDMI Connector
Rear Connection Panel
Side Connection Panel
15 Pin D Sub Connector (PC)
1
Pin No
Signal Assignment
Pin No
Signal Assignment
1
TMDS Data2+
11
TMDS Clock Shield
2
TMDS Data2 Shield
12
TMDS Clock-
3
TMDS Data2-
13
CEC
4
TMDS Data1+
14
Reserved (N.C. on device)
5
TMDS Data1 Shield
15
SCL
6
TMDS Data1-
16
SDA
7
TMDS Data0+
17
DDC/CEC Ground
8
TMDS Data0 Shield
18
+5V Power
9
TMDS Data0-
19
Hot Plug Detect
10
TMDS Clock+
Pin No
Signal Assignment
Pin No
Signal Assignment
1
Red Out
9
+5V DC
2
Green Out
10
Sync Return (Ground)
3
Blue Out
11
Monitor ID0 in Display
4
Unused
12
DCC Serial Data
5
Ground
13
Horizontal Sync
6
Red Return
14
Vertical Sync
7
Green Return (Ground)
15
DCC Serial Clock
8
Blue Return (Ground)
USB Port
Pin No
Signal Assignment
1
+5V
2
Data -
3
Data +
4
Ground
Click on the first or last page to see other KDL-32W4000 / KDL-32W4210 / KDL-32W4220 / KDL-40W4000 / KDL-40W4210 / KDL-40W4220 / KDL-40W4230 / KDL-46W4000 / KDL-46W4210 / KDL-46W4220 / KDL-46W4230 / KDL-52W4000 / KDL-52W4210 service manuals if exist.