DOWNLOAD Sony KDL-32V5500 / KDL-40V5500 / KDL-46V5500 / KDL-52V5500 Service Manual ↓ Size: 9.26 MB | Pages: 56 in PDF or view online for FREE

– 53 –

This supplement applies to models listed above.

MODEL

COMMANDER

DEST.

KDL-32V5500

RM-GD007

E(Australia,

New Zealand,
Singapore)

KDL-32V5500

RM-C003

Taiwan

KDL-32V5500/R 

RM-GD007 

E(

Singapore)

(Red) 

KDL-32V5500/R

RM-C003

Taiwan

(Red)

KDL-32V5500 /W 

RM-GD007 

E(Singapore)

(White) 

KDL-32V5500/W

RM-C003

Taiwan

(White)

KDL-40V5500

RM-GD007

E(Australia,

New Zealand,
Singapore)

Hong Kong

MODEL

COMMANDER

DEST.

KDL-40V5500

RM-C003

Taiwan

KDL-40V5500/R

RM-GD007

E(Singapore),

(Red) 

Hong Kong

KDL-40V5500/R

RM-C003

Taiwan

(Red)

KDL-40V5500/

W

RM-GD007

E(Singapore),

(White) 

Hong Kong

KDL-40V5500/

W

RM-C003

Taiwan

(White)

KDL-46V5500 

RM-GD007 

E(New Zealand,

Singapore)

KDL-46V5500

RM-C003

Taiwan

KDL-52V5500 

RM-GD007 

E(New Zealand,

Singapore),

Hong Kong

KDL-52V5500

RM-C003

Taiwan

– 54 –



1-8. Removal of Switch Unit Procedure

 1. REMOVAL

2. INSTALLATION

PUSH POINT

PUSH

PULL 
UP

a. PHOTO SHOW THE
POSITION DURING REAR
COVER REMOVAL.
b. PUSH TOWARDS INNER SET
WHILE REMOVE REAR COVER
FROM SIDE CONTROL

c. LIFT UP THE REAR COVER
FROM BOTTOM

CLICKING POSITION (PUSH 
FROM REAR COVER TO BEZEL)

1. FOR EASIER INSTALLATION
AT TOP SIDE, CLICK THE
REAR COVER FROM SIDE TO
CENTER.
2. PUSH THE REAR COVER AT
4 POSITIONS UNTIL CLICK
SOUND COME OUT.
3.THREE(3) POSITIONS AT
TOP SIDE AND 1 POSITION AT
RIGHT SIDE, NEAR SIDE
CONTROL)

1

2

3

CLICK POSITION

CLICK

Note:
Please Make Sure
Rear Cover Not
Overlap with Bezel.

Note:
Please refer to Section 4 : Disassembley
for screws informations.

Push this position to remove
Switch Unit more easily

Push and slant towards inner side of set.

Push and slant towards inner side of set to remove Switch Unit correctly.

 GB

Panel system

LCD (Liquid Crystal Display) Panel

TV system

Analogue: B/G, I, D/K
Digital: DVB-T

Colour/video system

Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video 
input)
Digital: MPEG-2 MP@ML/HL (Australian model), MPEG-2 MP@ML/HL, H.264/
MPEG-4 AVC MP/HP@L4 (New Zealand and Singaporean model)

Channel coverage

Analogue:B/G: VHF: E2–E12/UHF: E21–E69/CATV: S01–S03, S1–S41

VHF: 0–12, 5A, 9A/UHF: 28–69/CATV: S01–S03, S1–S44 
(Australia and Singapore only)
VHF: 1–11/UHF: 21–69/CATV: S1–S41
(New Zealand and Singapore only)

I: 

UHF: B21–B69/CATV: S01–S03, S1–S41 
(Australia and New Zealand only)

D/K: VHF: C1–C12, R1–R12/UHF: C13–C57, R21–R60/CATV: S01–S03, 

S1–S41, Z1–Z39 (Australia and New Zealand only)

Digital:

VHF/UHF (Australia and Singapore only), UHF (New Zealand only)

Sound output

10 W + 10 W

Aerial/Antenna/cable

75 ohm external terminal for VHF/UHF

1

S video input (4-pin mini DIN)

1

Video input (phono jack)/Monitor out

1

Audio input (phono jacks)/Monitor out

2

Video input (phono jack)

2

Audio input (phono jacks)

COMPONENT IN1

/

3

COMPONENT IN1

Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P

B

/C

B

: 0.7 Vp-p, 75 ohms/

P

R

/C

R

: 0.7 Vp-p, 75 ohms

3

 Video input (phono jack)

COMPONENT IN2

Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P

B

/C

B

: 0.7 Vp-p, 75 ohms/

P

R

/C

R

: 0.7 Vp-p, 75 ohms

COMPONENT IN1, 2

Audio input (phono jacks) (Australian model only)

HDMI IN1, 2, 3, 4

Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

 Analogue audio input (minijack) (HDMI IN1 only)

PC Input (see page 47)

 DIGITAL AUDIO OUT (OPTICAL) 

Digital optical jack (Two channel linear PCM, Dolby Digital)

Audio output (phono jacks)

PC IN

PC Input (D-sub 15-pin) (see page 47)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p

 PC audio input (minijack)

USB port

i

Headphones jack

LAN

10BASE-T/100BASE-TX connector (Depending on the operating environment of the 
network, connection speed may differ. 10BASE-T/100BASE-TX communication rate 
and communication quality are not guaranteed for this TV.)

Power requirements

220 V – 240 V AC, 50 Hz

Screen size (measured diagonally)

32 inches (Approx. 
80.0 cm)

40 inches (Approx. 
101.6 cm)

46 inches (Approx. 
116.8 cm)

52 inches (Approx. 
132.2 cm)

Display resolution

1,920 dots (horizontal) × 1,080 lines (vertical)

 GB

Design and specifications are subject to change without notice.

* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This 

affects the “Video Settings” menu and “Screen” menu settings. 
To view PC contents, set “Wide Mode” to “Full” and “Display Area” to “Full Pixel.”

~

• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical 

frequency (boldfaced).

Dimensions 
(Approx.) 
(w × h × d)

with Table-Top Stand

798 mm × 
584 mm × 259 mm

987 mm × 
684 mm × 303 mm

1,123 mm × 
771 mm × 330 mm

1,262 mm × 
869 mm × 358 mm

without Table-Top Stand

798 mm × 
536 mm × 89 mm

987 mm × 
636 mm × 93 mm

1,123 mm × 
723 mm × 96 mm

1,262 mm × 
822 mm × 115 mm

Mass (Approx.)  with Table-Top Stand

13.9 kg

19.4 kg

25.7 kg

33.9 kg

without Table-Top Stand

11.8 kg

16.7 kg

22.4 kg

29.8 kg

Supplied accessories

See “To check the accessories” (page 4).

Optional 
accessories

Wall-Mount Bracket

SU-WL500/WL50B

VGA

640

×

480

37.5

75

VESA MTS

SVGA

800

×

600

46.9

75

VESA MTS

XGA

1024

×

768

56.5

70

VESA MTS

1024

×

768

60.0

75

VESA MTS

WXGA

SXGA

HDTV