DOWNLOAD Sony KDL-32R420B / KDL-40R470B Service Manual ↓ Size: 2.91 MB | Pages: 27 in PDF or view online for FREE

Model
KDL-32R420B KDL-40R470B
Pages
27
Size
2.91 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-32r420b-kdl-40r470b.pdf
Date

Sony KDL-32R420B / KDL-40R470B Service Manual ▷ View online

KDL-32R420B/40R470B 21
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and 
!
 
mark are critical for safety. 
Replace only with part number specified. 
NOTE: The components identified by a red outline and a   mark contain confidential 
information. Specific instructions must be adhered to whenever these components are 
repaired and/or replaced. (See Appendix A) 
SCREWS
SCREW, +BVTP 3X10 TYPE IT-3
SCREW +BVTP 3X6 TYPE2 IT-3
7-685-647-79
7-685-645-79
SCREW, +PSW M5X20
NA
NA
3-452-815-21
P/N 
                  DESCRIPTION  
KDL-32R420B
KDL-40R470B
 
Stand to TV (2)
Main Board Plate (2)
Wireless Lan Card (1), Rear Cover (7), 
OP Cover (2), Stand Brackets (2),
Main Board Plate (2)
Rear Cover (9), Wireless Lan Card (1), 
OP Cover (3), Stand Brackets (2), 
Main Board Plate (4)
 
4-159-298-21
SCREW, + PSW M4X10
Stand Brackets (2) Main Board Plate (2)
Stand to TV (2)
Stand Brackets (2), Main Board Plate (2)
Stand Brackets (2)
2-990-421-41
SCREW (+PSW) (M3X6)
Main Board (4) 
Main Board (4)
KDL-32R420B/40R470B 22
ACCESSORIES AND PACKAGING
 
 
3-452-815-21 
SCREW, +PSW M5X20
 
 
 
(SCREWS TO ATTACH TABLE TOP STAND TO LCD TV)  
  
 
For product protection and safety reasons, Sony strongly recommends 
 
 
 
that you use the screws provided with the TV.  
 
 
 
CAUTION: These screws cannot be used to secure the TV  
 
 
 
to the Wall Mount Brackets.
 
 
3-299-071-08 
FLYER, SAFETY
 
 
4-528-762-11 
MANUAL, INSTRUCTION
MISCELLANEOUS
 
 
PART NO. 
DESCRIPTION
 
 
4-428-537-11 
CLAMPER, AC ADAPTER
 
 
 
(KDL-32R420B ONLY)
 
 
4-428-537-01 
CLAMPER, AC ADAPTER
 
 
 
(KDL-40R470B ONLY)
 
 
4-463-331-01 
SHEET RADIATION (17X17)
 
 
4-440-057-01 
SHEET, THERMAL (AYU2)
 
 
7-600-031-97 
TAPE (3M 1350FB-1) 15MMX66M BLK
 
 
7-600-031-96 
TAPE (3M 1350FW-1) 15MMX66M WHT
 
 
3-876-036-71 
UNI-LABEL, BLANK
OPTIONAL ACCESSORIES
 
  
PART NO. 
DESCRIPTION
 
 
4-414-470-01 
SUPPORT BELT KIT
 
REMOTE COMMANDER
 
 
PART NO. 
DESCRIPTION
 
 
1-492-065-21 
REMOTE COMMANDER (RM-YD092)
SECTION 5 - ACCESSORIES/PART NUMBER INFORMATION
 
  
PART NO. 
DESCRIPTION
KDL-32R420B/40R470B A-1
Sony Corporation
Sony SSOA
TV Service Engineering
Service Publications Department
9-883-586-02
English
2014BJ74WEB-1
© 2014.2
is a trademark of Sony Electronics.
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:
1. 
In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .
2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 
defective component MUST BE DESTROYED. Boards cannot be swapped.
5. 
If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 
and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.
b. 
and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6. 
If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 
KDL-32R420B/40R470B A-1
Sony Corporation
Sony SSOA
TV Service Engineering
Service Publications Department
9-883-586-02
English
2014BJ74WEB-1
© 2014.2
is a trademark of Sony Electronics.
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:
1. 
In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .
2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 
defective component MUST BE DESTROYED. Boards cannot be swapped.
5. 
If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 
and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.
b. 
and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6. 
If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 
Page of 27
Display

Sony KDL-32R420B / KDL-40R470B Service Manual ▷ Download