Sony KDL-32P3500 Service Manual ▷ View online
- 4 -
SPECIFICATIONS
*
1
AV1 outputs available only for analogue TV.
*
2
AV2 outputs watching scr een (except PC, HDMI, Component 1080i).
*
3
Specified standby power is reached after the TV finishes necessary internal processes.
*
4
HDMI3 is available only for KDL-32S55xx, KDL-32P35xx, KDL-26S55xx.
Model name
KDL-32S55xx/
KDL-32P35xx
KDL-32P35xx
KDL-26S55xx
KDL-22S55xx
System
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Depending on your country/region selection
Analogue: B/G/H, D/K, L, I
Digital: DVB-T
Analogue: B/G/H, D/K, L, I
Digital: DVB-T
Colour/Video System
Analogue: PAL, SECAM, NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML
Digital: MPEG-2 MP@ML
Channel Coverage
Analogue:48.25 - 855.25 MHz
Digital: VHF Band III (177.5 - 226.5 MHz)/UHF E21 - E69 (474 - 858 MHz)
Digital: VHF Band III (177.5 - 226.5 MHz)/UHF E21 - E69 (474 - 858 MHz)
Sound Output
10 W + 10 W (RMS)
8 W + 8 W (RMS)
5 W + 5 W (RMS)
Input/Output jacks
Aerial
75 ohm external terminal for VHF/UHF
/
/
AV1*
1
21-pin scart connector including audio/video input, RGB input, S-Video input, and Analogue TV
audio/video output.
audio/video output.
/
/
AV2*
2
21-pin scart connector including audio/video input, RGB input, S-Video input, and audio/video output.
COMPONENT IN
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B
/C
B
: 0.7 Vp-p, 75 ohms/
P
R
/C
R
: 0.7 Vp-p, 75 ohms
COMPONENT IN
Audio input (phono jacks)
HDMI IN 1, 2, 3*
4
Video: 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
PC (see page 35)
Analogue audio (minijack) (HDMI2 only) (KDL-32S55xx, KDL-32P35xx, KDL-26S55xx)
Analogue audio (minijack) (HDMI1 only) (KDL-22S55xx)
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
PC (see page 35)
Analogue audio (minijack) (HDMI2 only) (KDL-32S55xx, KDL-32P35xx, KDL-26S55xx)
Analogue audio (minijack) (HDMI1 only) (KDL-22S55xx)
AV3
Video input (phono jack)
AV3
Audio input (phono jacks)
Audio output (Left/Right) (phono jacks)
PC IN
PC Input (15 Dsub) (see page 35)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms, H/V Sync: TTL level
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms, H/V Sync: TTL level
PC audio input (minijack)
i
Headphones jack
USB port
CAM (Conditional Access Module) slot
Power and others
Power Requirements
220–240 V AC, 50 Hz
Screen Size
32 inches
(Approx. 80.0 cm
measured diagonally)
(Approx. 80.0 cm
measured diagonally)
26 inches
(Approx. 66.1 cm
measured diagonally)
(Approx. 66.1 cm
measured diagonally)
22 inches
(Approx. 54.8 cm
measured diagonally)
(Approx. 54.8 cm
measured diagonally)
Display Resolution
1,366 dots (horizontal) × 768 lines (vertical)
Power Consumption
135 W
110 W
60 W
Standby Power Consumption*
3
0.5 W or less
0.5 W or less
1 W or less
Dimensions
(w × h × d)
(w × h × d)
(with stand)
Approx. 80.7 × 55.7 × 22.2 cm
Approx. 67.9 × 48.5 × 22.2 cm
Approx. 55.8 × 41.7 × 21.5 cm
(without stand)
Approx. 80.7 × 50.8 × 9.4 cm
Approx. 67.9 × 43.5 × 9.3 cm
Approx. 55.8 × 37 × 7.9 cm
Mass
(with stand)
Approx. 12.7 kg
Approx. 10.0 kg
Approx. 6.9 kg
(without stand)
Approx. 11.4 kg
Approx. 8.7 kg
Approx. 6.1 kg
Supplied Accessories
Refer to “1: Checking the accessories” on page 4.
Optional Accessories
See “Installing the Accessories (Wall-Mount Bracket)” on page 31.
PC Input Si gnal Reference Chart for PC IN
, HDMI IN 1, 2 and 3*
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency.
• This TV’s PC input does not support interlaced signals.
• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency.
* HDMI3 is available only for KDL-32S55xx, KDL-32P35xx, KDL-26S55xx.
Signals
Horizontal (Pixel)
Vertical (Line)
Horizontal
frequency
(kHz)
frequency
(kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
VGA
640
480
31.5
60
VGA
SVGA
800
600
37.9
60
VESA Guidelines
XGA
1024
768
48.4
60
VESA Guidelines
WXGA
1280
768
47.4
60
VESA
WXGA
1280
768
47.8
60
VESA
WXGA
1360
768
47.7
60
VESA
- 5 -
CONNECTORS
21 Pin Connector (SCART)
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
21
HDMI Connector
15 Pin D Sub Connector (PC)
1
Pin No
Signal Assignment
Pin No
Signal Assignment
1
TMDS Data2+
11
TMDS Clock Shield
2
TMDS Data2 Shield
12
TMDS Clock-
3
TMDS Data2-
13
CEC
4
TMDS Data1+
14
Reserved (N.C. on device)
5
TMDS Data1 Shield
15
SCL
6
TMDS Data1-
16
SDA
7
TMDS Data0+
17
DDC/CEC Ground
8
TMDS Data0 Shield
18
+5V Power
9
TMDS Data0-
19
Hot Plug Detect
10
TMDS Clock+
Pin No
Signal Assignment
Pin No
Signal Assignment
1
Red Out
9
+5V DC
2
Green Out
10
Sync Return (Ground)
3
Blue Out
11
Monitor ID0 in Display
4
Unused
12
DCC Serial Data
5
Ground
13
Horizontal Sync
6
Red Return
14
Vertical Sync
7
Green Return (Ground)
15
DCC Serial Clock
8
Blue Return (Ground)
_
_
Red input
0.7 +/- 3dB, 75 ohms, positive
_
(S signal Chroma
Connected
Not Connected (open) * at 20Hz - 20kHz
Pin No
1
Signal
Signal level
1
Audio output B
(right)
(right)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
2
Audio input B
(right)
(right)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
3
Audio output A
(left)
(left)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
4
Ground (audio)
5
Ground (blue)
6
Audio input A
(left)
(left)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
7
Blue input
0.7 +/- 3dB, 75 ohms positive
8
Function select
(AV control)
(AV control)
High state (9.5-12V) : Part mode
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
9
Ground (green)
10
AVlink
11
Green
Green signal : 0.7 +/- 3dB, 75 ohms,
positive
positive
12
Open
13
Ground (red)
14
Ground (blanking)
15
input)
0.3 +/- 3dB, 75 ohms, positive
16
Blanking input
(Ys signal)
(Ys signal)
High state (1-3V) Low state (0-0.4V)
Input impedence : 75 ohms
Input impedence : 75 ohms
17
Ground (video
output)
output)
18
Ground (video
input)
input)
19
Video output
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
20
Video input
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
Video input
Y (S signal)
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
21
Common ground
(plug, shield)
(plug, shield)
-
-
- 6 -
NEX SELF DIAGNOSTIC SOFTWARE
IMPORTANT:
The TV sets in this manual DO NOT contain a self-diagnostic function. If an error occurs, the TV will not stay on.
The TV sets in this manual DO NOT contain a self-diagnostic function. If an error occurs, the TV will not stay on.
LED Error Codes and Descriptions
The TV sets in this manual DO NOT contain a self-diagnostic function.
Control LED’s
- 7 -
SECTION 2 DISASSEMBLY
2-2. Rear Cover Removal (Step 2)
2-1. Rear Cover Removal (Step 1)
Remove the ‘Rear Cover’ fixing screws indicated.
Screw Part number(s) and Description(s)
1) 2-580-640-01 SCREW, +BVTP2 4 X 16 12 Screws
2) 7-682-961-09 SCREW, +PSW M4 X 8
2 Screws
3) 7-685-648-79 SCREW, +BVTP 3 X 12
1 Screw
4) 7-685-646-79 SCREW, +BVTP 3 X 8
2 Screws
Remove the 4 stand fixing screws indicated and lift the TV
set up and away from the Stand Assembly.
set up and away from the Stand Assembly.
Screw Part number(s) and Description(s)
2-580-608-01 SCREW, +PSW M5X16
4 Screws
=>
=>
=>
=>
=>
=>
1
=>
1
=>
1
=>
1
1
1
1
1
2
=>
1
=>
3
=>
=>
1
2
=>
=>
1
=>
1
4
=>
4
Push point.
To remove the ‘Rear Cover’ lift up slightly from the bottom
and then gently push the ‘Button Bracket’ in by the side
controls whilst lifting the ‘Rear Cover’ up fully from the
bottom.
and then gently push the ‘Button Bracket’ in by the side
controls whilst lifting the ‘Rear Cover’ up fully from the
bottom.
2-3. Stand Removal
=>
=>
<=
<=
2-4. Cover, Under Removal
To remove the Cover, Under, remove the screw circled
and ease the cover away from the TV set.
and ease the cover away from the TV set.
Screw Part number(s) and Description(s)
7-682-961-09 SCREW, +PSW M4X8
1 Screw
2
2
Click on the first or last page to see other KDL-32P3500 service manuals if exist.