Sony KDL-32L4000 / KDL-37L4000 Service Manual ▷ View online
17
KDL-32L4000/37L4000
KDL-32L4000/37L4000
1-10. LCD PANEL REMOVAL
1 Disconnect 1 connector.
2 Remove ,
2 Remove ,
2 screws +BVTP2 4X16 (KDL-32L4000 ONLY),
3 screws +BVTP2 4X16 (KDL-37L4000 ONLY)
3 screws +BVTP2 4X16 (KDL-37L4000 ONLY)
3 Release hooks and slide out from Bezel.
LCD Panel
Clear Panel
Bezel Assembly
2
1
3
1-10-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
1 Clean the cabinet of the TV with a dry soft cloth.
2 Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
☛
18
KDL-32L4000/37L4000
KDL-32L4000/37L4000
Balancer Board
1
2
Inverter Cover
Plastic Strip
holding
Lamp Socket
holding
Lamp Socket
Inverter Board
DO NOT
REMOVE
BACKLIGHT
SCREWS
REMOVE
BACKLIGHT
SCREWS
1-11. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-32L4000 ONLY)
1 Remove 5 screws from Board Cover.
2 Pull out the Board from Lamp socket
2 Pull out the Board from Lamp socket
SHIELD REMOVAL
INVERTER BOARD REMOVAL
WARNING
NEVER REMOVE THE
SCREWS SECURING THE
PLASTIC STRIP HOLDING
PLASTIC STRIP HOLDING
THE LAMP SOCKETS
DAMAGE TO THE
BACKLIGHT TUBES WILL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32” model but applies to all models.
REMOVE SCREWS
SECURING
SHIELD
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
!
.
OCCUR!
BACKLIGHT
END VIEW
SOCKET
19
KDL-32L4000/37L4000
KDL-32L4000/37L4000
1
2
1-12. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-37L4000 ONLY)
1 Remove 6 screws from Board Cover
2 Disconnect 8 balancer connectors
2 Disconnect 8 balancer connectors
SHIELD REMOVAL
CAUTION!
Disconnect the 8
Balancer Board Connectors
REMOVE SCREWS
SECURING
SHIELD
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
20
KDL-32L4000/37L4000
KDL-32L4000/37L4000
WIRE DRESSING
KDL-32L4000 ONLY
OVERALL VIEW
Click on the first or last page to see other KDL-32L4000 / KDL-37L4000 service manuals if exist.