Sony KDL-32EX720 / KDL-32EX721 / KDL-32EX723 / KDL-32EX724 / KDL-32EX725 / KDL-32EX726 / KDL-32EX727 / KDL-32EX728 / KDL-32EX729 / KDL-37EX720 / KDL-37EX723 / KDL-37EX725 / KDL-40EX720 / KDL-40EX721 / KDL-40EX723 / KDL-40EX724 / KDL-40EX725 / KDL-40EX726 / KDL Service Manual ▷ View online
KDL-32/37/40/46/55EX720,721,723,724,725,726,726,727,728,729(AEP/UK/RUSS)
93
ADJUSTMENT
VCOM ADJUSTMENT
(IMPORTANT – Only for S-LCD 60Hz Panels)
Note: Please execute this adjustment if necessary.
1) Change Data of “VPC” service mode.
a. Select
“002 VCOM”
category by pressing “2 / 5” on remote.
b. Select “000 ENABLE” item by pressing “1 / 4” on remote.
c. Change ENABLE from “0” to “1” to enable VCOM adjustment.
VPC
SERVICE
002
VCOM
000
ENABLE 0
d. Select
“002 VCOM”
category by pressing “2 / 5” on remote.
e. Select “001 ADJUST” item by pressing “1 / 4” on remote.
f. Change data by pressing “3 / 6” on remote controller.
g. Finish the adjustment when the picture seems OK.
Attention:
-Every time the data changed by pressing “3 / 6” Key, the VCOM pattern will display for 5s and in the mean time OSD will disappear, After the 5s period, VCOM pattern
-Every time the data changed by pressing “3 / 6” Key, the VCOM pattern will display for 5s and in the mean time OSD will disappear, After the 5s period, VCOM pattern
will disappear and OSD will display again.
The 5s time can be adjust by data change.
The 5s time can be adjust by data change.
-If pressing the “3/6” key again during the 5s period, the VCOM pattern display time will be extended to another 5s.
VPC
SERVICE
002
VCOM
001
ADJUST 64
KDL-32/37/40/46/55EX720,721,723,724,725,726,726,727,728,729(AEP/UK/RUSS)
94
SAVE CHANGING DATA
1) Change Data of “Chassis” or “VPC” service mode
2) Write data for “Chassis” or “VPC” service mode
a. Press “Mute” on remote.
It shows green “
SERVICE
” changes to green “
WRITE
”.
b. Press “0” or “enter” on remote. Green “
WRITE
” changes to red “
WRITE
”. It indicate writing is processing.
c. After a while, red “
WRITE
” changes to green “
SERVICE
”. Writing process is done at this point.
3) TV reboot is necessary for applying data change.
ADJUSTMENT
CHASSIS
WRITE
000
WYVERN
000
S2_NOISE_TH 32
KDL-32/37/40/46/55EX720,721,723,724,725,726,726,727,728,729(AEP/UK/RUSS)
95
DIGITAL(DIG_SRV_MODE) SERVICE
TEST_PATTERN
*1 Video
2 Audio
DIGITAL
SERVICE
003 DIG_SRV_MODE
000 TEST_PATTERN
000 TEST_PATTERN
‐‐‐
DIGITAL
SERVICE
004 TUNER
000 !A_NOSIG_DET
000 !A_NOSIG_DET
001
ADJUSTMENT
CHANGE DATA
Note: “Digital” service mode don’t have to Save. (
except
“002 MODEL” and “005 CHAPRESET” category)
1) Change Data of “Digital” service mode. (
except
“003 DIG_SRV_MODE” category)
a. Press “2 / 5” on remote to select (up / down) category.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “0 / 10” on remote to select item.
2) Change Data of “Digital” service mode. (
“003 DIG_SRV_MODE”
category)
“003 DIG_SRV_MODE” is one category of “Digital” service mode.
Please note because this operation is special.
a. Press “2 / 5” on remote to select “003 DIG_SRV_MODE”.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “0 / 10” on remote to select item.
d. Press number key “1”~”9” directly. “*” stamp move.
e. Press “12 / enter / select” to decide and advance next step. Press “return”, when returning on the
previous page.
KDL-32/37/40/46/55EX720,721,723,724,725,726,726,727,728,729(AEP/UK/RUSS)
96
ADJUSTMENT
3) Write data for “Digital” service mode. (
“002 MODEL”
category)
Note: This procedure operation, when replaced the B board.
Note: Do not write a wrong segment or destination information in Product ID.
When the wrong setting is written, TV may not operate.
000 SEG -----------------Select JDM code information
001 DEST ---------------Select destination information
002 MODELNAME ---Select model name
004 SERIAL ------------ Can be set only once for the new board
a. Change data for each model.
b. Press “Mute”, “0” on remote sequentially.
It shows red “
WRITE
”. It indicate writing is processing.
c. After a while. Red “WRITE” disappears. Writing process is done after a while.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
I‐1
Write
Click on the first or last page to see other KDL-32EX720 / KDL-32EX721 / KDL-32EX723 / KDL-32EX724 / KDL-32EX725 / KDL-32EX726 / KDL-32EX727 / KDL-32EX728 / KDL-32EX729 / KDL-37EX720 / KDL-37EX723 / KDL-37EX725 / KDL-40EX720 / KDL-40EX721 / KDL-40EX723 / KDL-40EX724 / KDL-40EX725 / KDL-40EX726 / KDL service manuals if exist.