Sony KDL-32EX717 / KDL-40EX717 / KDL-46EX717 / KDL-55EX717 Service Manual ▷ View online
KDL-32EX717/40EX717/46EX717/55EX717
24
SERVICE ADJUSTMENTS
4. Press
2
to move to the
002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis
Model
Name
Data Value
Code Name
AZ1-L KDL-32EX717
25
3a-0.3
AZ1-L KDL-40EX717
25
3a-0.3
AZ1-L KDL-46EX717
25
3a-0.3
AZ1-L KDL-55EX717
25
3a-0.3
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
Data Value
Code Name
6. Proceed to “Setting the Destination”.
2-2-3. SETTING THE DESTINATION
After replacing the BAL Board or the LCD Panel, the destination location
must be set.
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software
which would require a BAL Board replacement.
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
7. Press
1
to move to “
001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
21: COL (TW grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination
of the TV.
GROU
P
DESTINATION
CODE
DATA
VALUE
DESTINATION
COL
21
COLUMBIA
TW
6
TAIWAN
TW grp
KDL-32EX717/40EX717/46EX717/55EX717
25
SERVICE ADJUSTMENTS
DIGITAL
SERVICE
002 MODEL
001 DEST
21: COL (TW grp)
Destination
Data Value
9. After verifying the destination data value displays,
press
0
to save (Write) the changes.
10. Exit Service Mode by pressing HOME or
turn the TV power off.
11. Proceed to “Verifying the Model and Panel Information”.
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID
PID
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
Model ID
Product ID
Panel
Code
25773337
54ca0000
xxxxxxxxxxxxxx
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model-Name
Model-ID
Product-ID
Model
Code
KDL-32EX717
25773337
54ca0000
3a-0.3
KDL-40EX717
25773335
54ca0000
3a-0.3
KDL-40EX717
25773335
54ca0000
3a-0.3
KDL-46EX717
25773338
54ca0000
3a-0.3
KDL-55EX717
25773336
54ca0000
3a-0.3
KDL-32EX717
25773337
54ca0000
3a-0.3
KDL-40EX717
25773335
54ca0000
3a-0.3
KDL-40EX717
25773335
54ca0000
3a-0.3
KDL-46EX717
25773338
54ca0000
3a-0.3
KDL-55EX717
25773336
54ca0000
3a-0.3
KDL-32EX717/40EX717/46EX717/55EX717
26
SERVICE ADJUSTMENTS
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
2-3. WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
NOTE: If the
Digital Service Menu is not displayed, press
JUMP or OPTIONS .
3 Press
2
to move to “006 WB” Category.
DIGITAL
SERVICE
006 WB
000 WHITE_BALANCE ___
000 WHITE_BALANCE ___
4. Press
0
to enter White Balance Adjustment mode.
5. To select the White Balance Adjustment setting that needs to
be changed, do the following:
a. To select R_DRV, press
a. To select R_DRV, press
1
.
b. To select G_DRV, press
2
.
c. To select B_DRV, press
3
.
KDL-32EX717/40EX717/46EX717/55EX717
27
SERVICE ADJUSTMENTS
d. To select R_BKG, press
4
.
e To select G_BKG, press
5
.
f. To select B_BKG, press
6
.
6. After selecting the White Balance setting, press
ENT to
display the edit screen.
The screen displays a “Please input WB items” message.
DIGITAL
SERVICE
WB
*1 R_DRV 128
*1 R_DRV 128
2 G_DRV 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
Please input WB items
(0 -255)
---
(0 -255)
---
Gain
0: x 0.5, 128: x 1, 255: x1.5
Offset
128: offset 0
7. Using the numbers buttons on the remote, enter the Data
Value for the White Balance setting (value must be between
1 and 255).
8. Press
ENT to WRITE (save) the changes.
9. To exit White Balance Adjustment, press
JUMP or OPTIONS
2-4. RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
2-4-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. If necessary, press
JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press MUTING.
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
8. Cycle AC Power (Unplug and Plug AC Cord from the
AC Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
Click on the first or last page to see other KDL-32EX717 / KDL-40EX717 / KDL-46EX717 / KDL-55EX717 service manuals if exist.