Sony KDL-32EX710 / KDL-40EX710 / KDL-46EX710 / KDL-55EX710 (serv.man2) Service Manual ▷ View online
KDL-32/40/46/55EX710(WB)
113
APPENDIX
Method of RC handling to close.
1. Align the holes of REAR COVER to the hooks of
BEZEL at top edge, and insert.
2. Pushing RC at the middle of top edge (hook
portion) can help insertion completed.
1. Align the holes of REAR COVER to the hooks of
BEZEL at top edge, and insert.
2. Pushing RC at the middle of top edge (hook
portion) can help insertion completed.
1
2
20
Hole of REAR COVER
Hook of BEZEL
KDL-32/40/46/55EX710(WB)
114
APPENDIX
Method of RC handling to close.
3. Align Close while pushing RC on the top.
4. Pushing Confirm screw holes indicated below are
4. Pushing Confirm screw holes indicated below are
aligned, and screw these holes at first.
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
3. Align Close while pushing RC on the top.
4. Pushing Confirm screw holes indicated below are
4. Pushing Confirm screw holes indicated below are
aligned, and screw these holes at first.
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
3
4
KDL-32/40/46/55EX710(WB)
114
APPENDIX
Method of RC handling to close.
3. Align Close while pushing RC on the top.
4. Pushing Confirm screw holes indicated below are
4. Pushing Confirm screw holes indicated below are
aligned, and screw these holes at first.
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
3. Align Close while pushing RC on the top.
4. Pushing Confirm screw holes indicated below are
4. Pushing Confirm screw holes indicated below are
aligned, and screw these holes at first.
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
3
4
KDL-32/40/46/55EX710(WB)
114
APPENDIX
Method of RC handling to close.
3. Align Close while pushing RC on the top.
4. Pushing Confirm screw holes indicated below are
4. Pushing Confirm screw holes indicated below are
aligned, and screw these holes at first.
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
3. Align Close while pushing RC on the top.
4. Pushing Confirm screw holes indicated below are
4. Pushing Confirm screw holes indicated below are
aligned, and screw these holes at first.
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
(Need to hold RC while screwing, otherwise RC
moves downward due to the gravity.)
3
4